Topics

I'm trying to setup a spa3000 under 10.04. I'm having trouble getting the trunk host name resolved by Asterisk. The FXO port is fine.

When I apply changes to the trunk under the webadmin I can see them being applied through the log available in Asterisk's own CLI so I know they're being written somewhere and then read by asterisk I just don't know where. I don't have any sip.conf under /ect/asterisk.

Can anyone tell me where the SIP trunk configuration file is stored?

Thanks!

I love being able to have incoming calls trigger events--stopping music, etc.--and responding to my set status--Away, Home, etc. I am not a fan, however, of people calling in and having to select a user to call. It's been creating a lot of confusion and I just don't think it's practical for me. I've been searching for a way to disable the user selection and have Asterisk only ring one user's voicemail and all the extensions.

Is this possible?

Thanks for your thoughts!

I've posted about this in users but I've since made some progress so I thought I'd refile it as I'm now sure that this was a direct product of the instillation process.

Sound is working on my system. I can run firefox and play a youtube video but still no hulu or xine. Both start for a second and then crash. I've narrowed the problem down to this log section:

Code Select Expand

== ATTEMPT FRESH START ==
1 02/11/12 20:41:10 Spawn_Device.sh 23 (spawning-device) 20485 Dev: 23; Already Running list: 15,16,18,19,29,30,45,55,21,53,22,23,43,25,27,50,26,51,
1 02/11/12 20:41:10 Spawn_Device.sh 23 (spawning-device) 20485 Device 23 was marked as 'running'. Not starting
1 02/11/12 20:41:10 Spawn_Device.sh 23 (spawning-device) 20485 Dev: 23; Exiting because not starting
05 02/11/12 20:41:13.748 Xine_Player::CMD_Play_Media() called for id 1003 filename: /home/public/data/videos/The Birds 1963 - Alfred Hitchcock 2.mp4 () <0xb6635b90>
05 02/11/12 20:41:13.749 Xine_Player::CMD_Play_Media() stopping PSS <0xb6635b90>
05 02/11/12 20:41:13.749 Xine_Stream_Factory::GetStream streamID is 0 <0xb6635b90>
05 02/11/12 20:41:13.769 I'm unable to initialize m_pXine's 'auto' audio driver. <0xb6635b90>
05 02/11/12 20:41:13.770 Stream audio/video initialization failed <0xb6635b90>
05 02/11/12 20:41:13.770 Cannot create new stream with ID=1003 <0xb6635b90>
05 02/11/12 20:41:13.771 Xine_Player::CMD_Play_Media() stream is NULL, aborting - init failure? <0xb6635b90>
05 02/11/12 20:41:13.832 Xine_Player::CMD_Stop_Media() with corresponding stream id 1003 (nil). <0xb6635b90>
05 02/11/12 20:41:13.832 Xine_Player::CMD_Stop_Media() stream is NULL, aborting - init failure? <0xb6635b90>

Both Xine and Hulu are crashing. Here's xine_player.log:

Code Select Expand

== ATTEMPT FRESH START ==
1       02/08/12 23:40:19       Spawn_Device.sh 23 (spawning-device)    ^[[1;00m28009 Dev: 23; Already Running list: 15,16,18,19,29,30,41,21,52,56,25,60,23,58,26,22,^[[1;00m
1       02/08/12 23:40:19       Spawn_Device.sh 23 (spawning-device)    ^[[1;00m28009 Device 23 was marked as 'running'. Not starting^[[1;00m
1       02/08/12 23:40:19       Spawn_Device.sh 23 (spawning-device)    ^[[1;00m28009 Dev: 23; Exiting because not starting^[[1;00m
05      02/08/12 23:49:10.833           ^[[33;1mXine_Player::CMD_Play_Media() called for id 1001 filename: /home/public/data/videos/Alfred Hitchcock - Rope (1948) DVDRip (SiRiUs sHaRe).avi ()^[[0m <0xb669db90>
05      02/08/12 23:49:10.834           ^[[33;1mXine_Player::CMD_Play_Media() stopping PSS^[[0m <0xb669db90>
05      02/08/12 23:49:10.834           ^[[33;1mXine_Stream_Factory::GetStream streamID is 0^[[0m <0xb669db90>
05      02/08/12 23:49:10.871           ^[[33;1mI'm unable to initialize m_pXine's 'auto' audio driver.^[[0m <0xb669db90>
05      02/08/12 23:49:10.872           ^[[33;1mStream audio/video initialization failed^[[0m <0xb669db90>
05      02/08/12 23:49:10.872           ^[[33;1mCannot create new stream with ID=1001^[[0m <0xb669db90>
05      02/08/12 23:49:10.873           ^[[33;1mXine_Player::CMD_Play_Media() stream is NULL, aborting - init failure?^[[0m <0xb669db90>
05      02/08/12 23:49:10.919           ^[[33;1mXine_Player::CMD_Stop_Media() with corresponding stream id 1001 (nil).^[[0m <0xb669db90>
05      02/08/12 23:49:10.919           ^[[33;1mXine_Player::CMD_Stop_Media() stream is NULL, aborting - init failure?^[[0m <0xb669db90>
05      02/08/12 23:50:16.472           ^[[33;1mXine_Player::CMD_Play_Media() called for id 1002 filename: /home/public/data/videos/Alfred Hitchcock - Rope (1948) DVDRip (SiRiUs sHaRe).avi ()^[[0m <0xb669db90>
05      02/08/12 23:50:16.473           ^[[33;1mXine_Player::CMD_Play_Media() stopping PSS^[[0m <0xb669db90>
05      02/08/12 23:50:16.473           ^[[33;1mXine_Stream_Factory::GetStream streamID is 0^[[0m <0xb669db90>
05      02/08/12 23:50:16.493           ^[[33;1mI'm unable to initialize m_pXine's 'auto' audio driver.^[[0m <0xb669db90>
05      02/08/12 23:50:16.494           ^[[33;1mStream audio/video initialization failed^[[0m <0xb669db90>
05      02/08/12 23:50:16.494           ^[[33;1mCannot create new stream with ID=1002^[[0m <0xb669db90>
05      02/08/12 23:50:16.495           ^[[33;1mXine_Player::CMD_Play_Media() stream is NULL, aborting - init failure?^[[0m <0xb669db90>
05      02/08/12 23:50:16.496           ^[[33;1mXine_Player::CMD_Stop_Media() with corresponding stream id 1002 (nil).^[[0m <0xb669db90>
05      02/08/12 23:50:16.496           ^[[33;1mXine_Player::CMD_Stop_Media() stream is NULL, aborting - init failure?^[[0m <0xb669db90>
05      02/08/12 23:51:00.868           ^[[33;1mGot a reload command from 0 ^[[0m <0xb669db90>
05      02/08/12 23:51:01.123           ^[[33;1mDestroying all active streams^[[0m <0xb6e9f970>
05      02/08/12 23:51:01.183           ^[[33;1mTCPIP: Closing connection to -1 (m_pNotificationSocket) 0x8cf24d0 m_Socket: 10^[[0m <0xb31feb90>
05      02/08/12 23:51:01.198           ^[[33;1mTCPIP: Closing connection to -1 (m_pNotificationSocket) 0x8ceda70 m_Socket: 9^[[0m <0xb39ffb90>
05      02/08/12 23:51:02.017           ^[[33;1mDropping all sockets...^[[0m <0xb6e9f970>
05      02/08/12 23:51:02.038           ^[[33;1mDone dropping sockets!^[[0m <0xb6e9f970>
05      02/08/12 23:51:02.042           ^[[33;1mvoid ClientSocket::Disconnect() on this socket: 0x8c6b300 (m_Socket: 6)^[[0m <0xb6e9f970>
Return code: 2
2       02/08/12 23:51:02       23 (spawning-device)    ^[[1;33mDevice requests restart... count=1/50 dev=23^[[1;00m
2       02/08/12 23:51:02       23 (spawning-device)    ^[[1;33mDevice was disabled or removed. Stopping and marking as not running.^[[1;00m
                                                             842,1         Bot
05      02/08/12 23:50:16.496           ^[[33;1mXine_Player::CMD_Stop_Media() with corresponding stream id 1002 (nil).^[[0m <0xb669db90>
05      02/08/12 23:50:16.496           ^[[33;1mXine_Player::CMD_Stop_Media() stream is NULL, aborting - init failure?^[[0m <0xb669db90>
05      02/08/12 23:51:00.868           ^[[33;1mGot a reload command from 0 ^[[0m <0xb669db90>
05      02/08/12 23:51:01.123           ^[[33;1mDestroying all active streams^[[0m <0xb6e9f970>
05      02/08/12 23:51:01.183           ^[[33;1mTCPIP: Closing connection to -1 (m_pNotificationSocket) 0x8cf24d0 m_Socket: 10^[[0m <0xb31feb90>
05      02/08/12 23:51:01.198           ^[[33;1mTCPIP: Closing connection to -1 (m_pNotificationSocket) 0x8ceda70 m_Socket: 9^[[0m <0xb39ffb90>
05      02/08/12 23:51:02.017           ^[[33;1mDropping all sockets...^[[0m <0xb6e9f970>
05      02/08/12 23:51:02.038           ^[[33;1mDone dropping sockets!^[[0m <0xb6e9f970>
05      02/08/12 23:51:02.042           ^[[33;1mvoid ClientSocket::Disconnect() on this socket: 0x8c6b300 (m_Socket: 6)^[[0m <0xb6e9f970>
Return code: 2
2       02/08/12 23:51:02       23 (spawning-device)    ^[[1;33mDevice requests restart... count=1/50 dev=23^[[1;00m
2       02/08/12 23:51:02       23 (spawning-device)    ^[[1;33mDevice was disab
led or removed. Stopping and marking as not running.^[[1;00m


Any ideas as to what could be happening? This is on a fresh 0810 final install.


I just reloaded my machine to make sure. This is definitely affecting the most recent 0810 installs. I cannot run hulu or xine, but the dce wrapper (I think) stays active so that controls stay up on orbiters and the MD doesn't return to its main menu. Is there any other log that would be helpful? My sound is also not working, if that is related.

I've been trying all weekend to try and get my SPA3000 to register with FreePBX. I've tried the procedures in all three different wiki articles as well as some others that were not associated with LinuxMCE. FreePBX is giving me these errors. Could they be keeping the device from registering?

Could not reload FOP server
Could not reload the FOP operator panel server using the bounce_op.sh script. Configuration changes may not be reflected in the panel display.
Added 52 minutes ago
(freepbx.reload_fop)
symlink from modules failed
retrieve_conf failed to sym link the /etc/asterisk/iax.conf file from modules
Added 52 minutes ago
(retrieve_conf.SYMLINK)
Failed to copy from module agi-bin
Retrieve conf failed to copy file(s) from a module's agi-bin dir: copy(/usr/share/asterisk/agi-bin/recordingcheck): failed to open stream: Permission denied
copy(/usr/share/asterisk/agi-bin/fixlocalprefix): failed to open stream: Permission denied
copy(/usr/share/asterisk/agi-bin/directory): failed to open stream: Permission denied
copy(/usr/share/asterisk/agi-bin/dialparties.agi): failed to open stream: Permission denied
copy(/usr/share/asterisk/agi-bin/list-item-remove.php): failed to open stream: Permission denied
copy(/usr/share/asterisk/agi-bin/enumlookup.agi): failed to open stream: Permission denied
copy(/usr/share/asterisk/agi-bin/checksound.agi): failed to open stream: Permission denied

Added 52 minutes ago
(retrieve_conf.CPAGIBIN)

I have an MD hooked up to a standard touch monitor through DVI. I bought it for ten dollars at goodwill and absolutely love it for my kitchen; the only problem is that the LinuxMCE screensaver dims the screen to black after a bit instead of cutting off the signal like a normal computer hooked to a standard monitor. Because of this, the monitor's back light always stays on instead of going to sleep. I've tried to adjust the Kubuntu screen saver but it doesn't seem to affect LinuxMCE's.

Can anyone suggest a way to dim the screen or give me the package name that LinuxMCE uses as a screen saver?

Thanks!

In the web admin, under software modules, there is an entry with the description "AirPlay Audio Player is a iOS audio stream server. You can play sound to your MD with any devices having iOS >= 4.3" If this is functional, any information should be add to the wiki page as I can't find anything in the forum or wiki. I'll be happy to write the article once I get it working, but I can't figure our how to activate it. Anyone have any suggestions?

I've accidentally overridden my /etc/rc.local file. Is it something that could be copied from another user? If so, can someone post theirs?

I'm running the most current 0810

Whenever I try to use Roaming Orb or log on through a web browser, I can login, select an orbiter and get to the interface but instead of an orbiter I get a missing resource icon where the image should be (a blue question mark from a mac) On roaming orb it simply never connects. When I run sudo killall -9 Proxy_Orbiter on my core is says "no process killed"

Any Ideas? 

I'd like to send a standard RCA audio signal to different rooms using my Hauppauge capture card. Right now I'm using a "Generic Video Console" device template and setting it as being from the composite port on the card. This works, however, it forwards the video as well as the audio: which seems like a waste to not only take up network bandwidth but also the resources to encode the analogue video. Also, with this setup, I can only access my device from the room that I have it set in.

Does anyone have a setup like this? Really all I want to do is forward just the audio from an old vinyl player I have to my MDs if that makes it any clearer.

I've been trying dozens of codes from R.Central all day (just typing them into a device template that is controlled by a USBUIRT and clicking test) None of them work.

The codes from their site look like this:
0000 0067 0000 0010 0060 0018 0018 0018 0030 0018 0018 0018 0018 0018 0018 0018 0018 0018 0030 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0336

And ours look like this for the most part (at least in the Sony Pronto Codesets)

0000 0068 0041 0000 0060 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0018 0018 0018 03f7 0060 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0018 0018 0018 03f8 0060 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0018 0018 0018 03f7 0060 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0018 0018 0018 03f8 0060 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0018 0018 0018 0018


Is their anyway to convert between the two?

What specifically needs to be done to set up the RoamingOrb app? I know settings have to be changed but when I change the ip to 192.168.80.1 and the port to 3561, the app still stalls... I know there's is a wiki article about this but it doesn't give any specifics nor does any other forum entry :? 

Thanks for any help, if you post here I'll be sure to update the wiki.

I have four sound cards powered by squeezeslave working fine with Squeezebox Server on the core, and I have them defined in the web admin as Squeezeboxes with rooms defined for each one. I can stream music to them perfectly through the web interface, at http://192.168.80.1:9000/, but when I try to control them with an Orbiter it will allow me to select audio and then never starts: the time elapsed for the song doesn't even come up on the orbiter.

Anyone been in the situation?

Let me start off by saying I've been slowly (and painfully) teaching myself Objective-C this summer to the point I can understand C++ and while I don't feel comfortable coding anything from scratch I could certainly try to make sense of any antiquated code in Pluto/LinuxMCE like support for Caddx NX-8E seems to be.

So basically I've got whole house audio working with TV and now I've finally gotten my GC-100 working (one of the new ones) to find that the instructions from the wiki entry "Caddx NX-8E" don't produce any response when a sensor is tripped :/ 

It is my understanding that this alarm panel used to be supported and is no longer but if ANYONE knows anything about it PLEASE RESPOND!! School is starting up and I'm getting a little crazy..
Thanks to ANYONE who has a system working with GE Interlogix, Caddx NX-8E, or anything else one would find to be relevant who responds!
Tred.

I've tried multiple Orbiters and multiple mp3 files but no matter what I try as soon as I click on the Artist under the Audio menu the orbiter crashes and reconnects to the router 
I'm completely baffled so if anyone has any ideas please share!
Thanks

When I was installing LinuxMCE and was booted into Kubuntu (before I ran the install script) I could connect with both eth0 and eth1 (they're identical and both on the motherboard)
Now that I have linuxMCE installed I can get the core to either connect to the internet with eth0 but then it doesn;t give out IP addresses or if I switch the interfaces in web admin it will give out IPs and not connect to the external network. I've tryed reinstalling and have the same problem if anyone can help it would be greatly appreciated

I've decided to upgrade more core as my old one had a fairly slow processor and only two PCI slots I've put together a system with an MSI 790FX-GD70 mainboard and a GeForce 8400 GS 512MB GPU (https://secure.newegg.com/WishList/MySavedWishDetail.aspx?ID=11077474); It also has one of the new AMD Phenom II 6 core CPU's. Unfortunately when I try to install 0810 from the latest snapshot it boots and the part where I would normally go through the generic Kubuntu install (NOT the part where the AV wizard is supposed to come up) is just a black screen however strangely enough it is receiving signal (the monitor isn't going to sleep)) So I tried to install just kubuntu 8.10 and was able to go through the internet installation just fine until I rebooted and saw instead of it going into the AV wizard it hangs and drops me into a console (tty1)

At this point I'm totally stumped and would appreciate any help I can get.

     Currently I'm getting 100 channels from my cable company (because I refused to upgrade to digital, their just sending that many analog channels over my internet line free.) I realize this is strange but it means that I definitely need to get an analog card working. I just though I'd get that out of the way because when I asked on irc I was just told that analog wasn't worth it =)

     So now I have a Hauppauge WinTV-PVR-500 which LinuxMCE recognizes and I have setup with the Setup assistant. The problem is that IVTV never installed and while MythTV Setup found the card and downloaded channels from SchedulesDirect it always gives an "all inputs are being used, but their is no video" error or crashes.

     I would really like to figure this out so thanks to whomever can help!

I was thinking about using Pithos (http://www.ubunter.com/apps/blog/show/3097631-pithos-a-pandora-player-for-gnome) as a pandora player we could then just right a DCE wrapper for the program much like hulu's and since the application is completely controllable through the terminal we could make an dedicated orbiter page (as opposed to just a control for the keyboard and mouse)

I have a media director that I have stored centrally and then use HDMI over cat5 to send to my tv and a Webdt to control. The only problem with this is that when I watch hulu theres no way to move the cursor away from the video as i don't have a mouse in the room. I would love to see a hide mouse button on this page of the orbiter or even a button to move the mouse to the very bottom left where it's not visible.