Topics

Hi All,

Can someone help me out sending all related .reg files of HADesigner , i'm trying to get this work under WINE, so we can run it under linux.

Thnx in advance,

Dave

Hi All,

Yesterday i was playing around with Wine on linux (http://winehq.com) and tried to install the windows orbiter, with many luck i managed to install it and use it on linux ( check attached screenshot )

If you want to try it you have to use the wine version from the site http://winehq.com , not the versions from the repo's .


Have fun,

Dave

Hi,

After some reading on the net and following syslog, i decided to replace my internal network card, my old one was an attansic ( atl1 ) and the new one is an tg3
My problem is now that my dhcp-server won't start anymore, the only logging i could find is this :

Nov 10 08:56:41 dcerouter dhcpd: Internet Systems Consortium DHCP Server V3.0.5 Nov 10 08:56:41 dcerouter dhcpd: Copyright 2004-2006 Internet Systems Consortium. Nov 10 08:56:41 dcerouter dhcpd: All rights reserved. Nov 10 08:56:41 dcerouter dhcpd: For info, please visit http://www.isc.org/sw/dhcp/ Nov 10 08:56:41 dcerouter dhcpd: Wrote 0 deleted host decls to leases file. Nov 10 08:56:41 dcerouter dhcpd: Wrote 0 new dynamic host decls to leases file. Nov 10 08:56:41 dcerouter dhcpd: Wrote 0 leases to leases file. Nov 10 08:56:41 dcerouter dhcpd: socket: Address family not supported by protocol - make sure Nov 10 08:56:41 dcerouter dhcpd: CONFIG_PACKET (Packet socket) and CONFIG_FILTER Nov 10 08:56:41 dcerouter dhcpd: (Socket Filtering) are enabled in your kernel Nov 10 08:56:41 dcerouter dhcpd: configuration!

Can someone help please,


Thanx a lot,

Dave

Hi,

After a couple of days running linuxMCE 0710 RC2 i get this message /etc/init.d/mysql: ERROR: The partition with /var/lib/mysql is too full!

The problem is, that i can't start mysql anymore, anyone any ideas?

Dave

Ps. I already checked with df -h if there was low diskspace on my 160 gb hdd and i don't have any space left but this happened in a few hours, and i can't see in which directory or file the size is in.

Hi All,

I have my media ( video, music , pictures ) stored on a 1 TB raid 5 config, linuxMCE automatically found this device to be stores in /mnt/device/** but i do not get the message in one of my orbiters to use the linuxmce structure just like when u add an second hdd.

So what i did was put some lines in /etc/exports run a exportfs -a and mounted my media from /mnt/device/**/Video to /home/public/data/videos, this really works because the lack of autodetection of the raid array on /mnt/device/**

BUT my problem now is that my media is being messed up, for example, i have a video file --> movie.iso under /home/public/videos/M/movie.iso ( Structure under videos / audio  is Alfabetical ( 0 to 9 and A to Z ) then i go to the pluto-admin website to resynchronize my media to the database, i reload my router ( is this neccessary? ) i go to videos in my orbiter and don't see any movie.iso, but an title of one of the songs in my audio directory ( 400 GB of audio ) ( /home/public/data/audio )( also Alphabetical ordered 0 to 9 and A to Z )

Hi,

I Have a Raid cabinet configured with raid 5, this is automatically found by the the deamon that is running in the background, on this raid cabinet i have my media --> Video, Adio Pictures, etc, my,

to share my media with my media directors and other pc's in my network, i mounted /homlieve )e/public/videos /mnt/devices/34/Video and the same for video and pictures, this works and i made an Video.folderlock files for the Directories on the raid devices otherwise i get double entry's in my database, this already happened, which tables can i empty, truncate i believe to start with an emty clean media database ( pluto_media i believe ) .

My other question is, how i can make my mountpoints permanent on my core to mount my videos,audio,picture, on my raid devices?


Thnx in advance,

Dave

Hi,

Can someone explain how to configure a headless core via the cd install with an pvr-500 tuner in it and to let linuxmce recognize it and configure the card or does the card has to be in an media director, in my old situation i had my core as an hybrid and there i had the possiblity to configure mythtv with the pvr-500, but not anymore, someone?

Dave

Hi there,

I'm trying to get my raid config to work. I have an Sillicon Image 3132 2 esata pmp ( port multiplier ) card that is connected to an 5 disk array, with 2 x 80 gb disks for the os ( Raid 1 ) and 3 x 500 gb disks for my data ( raid 5 ) this is what i trying to accomplish, for starters i believe that port multiplier is not supported by the recent kernel in lmce, it is supported in 8.04, i managed to install the latest hardy kernel on gutsy, don ask me why but this was only a test case, through this latest hardy kernel i was able to get DMRAID working but i had the dvd version installed ( i386 ) so i couldn't do anything about the os. Mu question is, can someone help out with setting this up or guide me, i read a lot, but it isn't clear for me to use DMRAID or SOFTWARE RAID and how to set it up.

linuxmce OS on 2 x 80 gb disks in RAID 1

DATA on 3x 500 gb disks in RAID 5

Can anybody help me out please.

Thanx a lot


Dave

Hi there,

I'm running linuxMCE 0710 64 bit dl edition, i get these messages in my '/var/log/syslog'  Anyone?


hardware :

Asus p5k
qt6600 quad core
4 gb mem

rtc: lost some interrupts at 1024Hz.
[  917.780480] printk: 248 messages suppressed.

Hi,

I have an new motherboard an Asus p5K with an dual core quad proccessor 2.4 and running the AMD64 version, i found out that the UpdateMedia is running between 70 and 80 % cpu all the time and draining the power of my machine, does someone reconize this problem, i can't even startup mythtv or someting else.

Dave

Hi,

I bought an asus p5k with an dual core quad cpu on 2400 but i have never had the problem that i can't install linuxmce, but when i put in the dvd he boots just fine, but when i choose the sata disk that has to be used for linuxmce, he goes wrong at copying dvd to harddisk i get erros like call trace, a hope errors with terms like RIP RSP 00 51 ff b5 76 bb, and the install stops right there, i tried no acpi acpi=off and numberes of other strings, itried other linux variants like fedora, plain ubuntu, server desktop alternate version nothing works, but i can install windows so the hardware is good.z

Can someone help out please

Dave

Hi all,

I'm trying to install the amd64 bit version on a Hyperthreading machine from HP a Dc7600 with a pvr-500 in it because i have a lot off problems with my hardware with the i386 version of a diffrent hp machine a d530 sff with a pvr-500 in it. The problem is now that the installation went fine but when i went through the whole installation and setup and when i was fineshed i halted the machine the stranged thing was that the machine didn't halted but rebooted <--> that is one, ---> two is that when i put in my pvr-500 in a free pci slot, i turned on my machine and he booted into kubuntu splash screen for 1/3 the way a freezed. MMhh i thought lets try the other pci slot mmmh same problem, took the card out booted up and everything fine, before everybody is going to tell me that my card is broken, no that is not the problem a have two of these pvr-500, and with mythbuntu everything is running fine, ps i turned off I/O for APIC MODe also off in the bios, tried to upgrade the bios and downgraded into diffrent version but no luck and no diffrence. This same machine is running the amd64 and the i386 from mythbuntu very fine, what could the problem be and what is this with the poweroff/ halt reboot thing, this i already had on the i386 version cd and dvd and on diffrent hardware.


Dave

Hi Everyone,

Can someone help me with my 2x pvr-500 the problem is that i can watch tv OR recording a program so its using only one tuner, instead of that i have for tuners, all installed by the book.
I don't what to do anymore running out of options, and from my second md i can't watch tv maybe got to do with this problem also, please can someone help me.

Dave

http://www.mythtv.org/wiki/index.php/Release_Notes_-_0.21


Says it all --> Maybe in 0804 Hardy Hardon --> linuxMCE

Dave

Hi there,

I'm using linuxMCE from version 1.0 till now 0710 Beta4 in a testcase with an HP d530 sff with 2 x pvr-500 with an 80GB sata 3gb/s disk in it, the same setup i used with mythbuntu and all other mythtv distro's, mythbuntu worked fine for me but the music thingy in mythtv i didn't really like because i have an collection of nearly 600 gb of music. So i my quest for looking for an alternative mediacenter went on. I stumpled againt another GREAT open source mediacenter with also the possibilty to control home automation devices --> ): LinuxMCE, this i began to install and what was it a big suprised i ran into mythtv again inside linuMCE, so my thought was with the knowledge and pain sometimes to install and get that one going on to get my hands dirty again on mythtv, tested some few things with the disless feature, wich i can really recommend " drbl / clonezilla " the one i use for many months now as my diskless feature for mythbuntu, the guys over there are maybe considering to implement that one into mythbuntu hardy hardon ( drbl / clonezilla ) so i went on and on, i'd also like to see some european xmltv providers that are not in the xmltv package, for instance i live in the Netherlands we have many cable providers here but the only good xmltv provider is " tv_grab_nl_py http://code.google.com/p/tvgrabnlpy/

Ok enough history lessons, the main thing is that i CANNOT watch tv properly with linuxMCE / mythtv with 1x , 2x pvr-500 cards from hauppage, but with an other pvr distro like mythbuntu where mythtv is the main application it really works great, can someone please help me out because i'm close to the edge to go back to mythbuntu, but i don't want that because i want to focus on linuxMCE and all of its features. PLEASE HELP PLEASE HELP, ok please help out a poor man from Holland !

( linuxMCE 0710 Beta4, HP d530 SFF 2.8, 4 memory gb, 1000 mbps nic ,  80gb sata 3 gb/s, 2x pvr-500 mce from Hauppage, and off course the gyro remote " The CHief "

Thnx in advance,

Dave Haakenhout

Holland

Hello,

Is the mceusb2 compatible now use it as ir transmitter in 07010 beta3.
Because i have to off those and i really like to use them.
thnx in advance

Hi Everyone,

Is it possible to play within linuxmce an ppt or pps file from Impress, beacause i know that you can start Openoffice Impress ( open source powerpoint ) in kiosk mode ( full screen ), does someone has some experience with this or maybe want to help me.

Thnx in advance,

Dave

Hi,

Just a small question, does someone has problems with analog or maybe even with digital tuner cards the problem that when you're switching from one channel to antoher that the mythtv-backend  crashes or even dies? So what i did to test something and maybe someone has an better idea then me, i just killed ( just for testing purposes ) the mythtv-backend proccess, and just in my terminal connected to my laptop ( to see whats happening ) spawned mythbackend ( so not mythtv-backend --> its only a wrapper and ads some logging to /var/log/mythtv/mythbackend.log and a pid number to kill it in my case ) and just what i thought and i really don't why but it rapidly speeds up mythtv and for sure switching channels with my hauppage pvr-500, and the most important thing off all -----> i switched back and forth with my channels for nearly then minutes and it didn't crashed a single time.

Hope that someone also found this and can tell us more about it ( maybe some scripting )

Happy to share stuff

Dave

Hi,

Is there a way or maybe in the near future that we can change the font size of the gui, this because i'm using it on my crt television and it is not really readable when i for example are scrolling throught my music collection of 350 gb.

I hiope to hear from someone,

Dave

Hi,

Ihave question, does someone know if you can you this on linuxmce Click On / Click Off ( Klik Aan / Klik Uit --> Dutch ) http://www.klikaanklikuit.nl/producten.asp?cid=4


I hope someone is using this already, i don't know if it's x10 s10 RF or something else, i hope to hear from someone.

With kind regards,

Dave