Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - slampt

Pages: [1] 2 3 ... 7
Users / Re: Intel NUC
« on: March 27, 2013, 01:13:53 pm »
Ok with a little assistance from the Unrecognized Nic wiki entry and the latest src for the e1000e from I have managed to create a new MD, the NUC boots, and I am presented with Failed to setup X.

I will now try to compile the modules for the intel graphics card HD 4000 :P


Users / Re: Intel NUC
« on: March 25, 2013, 03:25:43 pm »
Hey Guys,

Just  borrowed one of these to give it a shot, firstly I tried to PXE boot it as an MD, it unfortunately kernel panics;

Kernel Panic - not syncing: Attempt to kill init!
Pid: 1, comm: init Not tainted 2.6.32-44-generic #98-Ubuntu

Any ideas?

Users / Re: lmce 1004 and MythTV
« on: March 23, 2013, 04:14:44 pm »
Sorry Posde,

Here it is;

dcerouter_1032070:/var/log/mythtv# ls -la /mnt/device/65/public/data/pvr/
total 12
drwxrwsrwx 3 root public 4096 2013-03-23 18:27 .
drwxr-xr-x 8 root public 4096 2012-05-16 00:40 ..
drwxrwsr-x 2 root public 4096 2013-03-23 17:56 livetv
-rwxrwxrwx 1 root public    0 2013-03-23 23:06 livetv.folderlock

dcerouter_1032070:/var/log/mythtv# ls -la /mnt/device/65/public/data/pvr/livetv
total 478884
drwxrwsr-x 2 root   public      4096 2013-03-23 17:56 .
drwxrwsrwx 3 root   public      4096 2013-03-23 23:13 ..

Users / Re: lmce 1004 and MythTV
« on: March 23, 2013, 10:48:51 am »
Hey Guys,

Sorry to dig up an old thread, I thought it would be better to reply to this one than start a new one.
I finally got around to installing my HDHomerun DVB-T. I had to scan for the channels manually but after that, I seem to be getting the same permissions error.

2013-03-23 17:36:55.483 TFW, Error: Opening file '/mnt/device/65/public/data/pvr/livetv/1007_20130323173654.mpg'.
         eno: Permission denied (13)
2013-03-23 17:36:55.527 TVRec(1) Error: RingBuffer '/mnt/device/65/public/data/pvr/livetv/1007_20130323173654.mpg' not open...
2013-03-23 17:36:55.618 TVRec(1) Error: CreateLiveTVRingBuffer() failed
2013-03-23 17:36:55.685 TVRec(1) Error: Failed to create RingBuffer 1
2013-03-23 17:36:55.768 TVRec(1): Changing from WatchingLiveTV to None
2013-03-23 17:36:55.646 ProcessPAT: Program not found in PAT.
         Rescan your transports.

Permissions are;

drwxrwsr--  3 root public 4096 2013-03-23 17:41 pvr

Any help would be appreciated..


Users / Re: Intel NUC
« on: March 17, 2013, 09:20:33 am »
Thanks,  I might give one a go and see how it fairs.
Should use a lot less power than my current clunker (core2duo)
The only think I was concerned about was the graphics, intel HD 4000.


Users / Intel NUC
« on: March 17, 2013, 02:56:21 am »
Hey all,

Just wondering if anyone has tried using an intel nuc for an MD?
I was going to look at using one as a core, however it would require a USB Ethernet adapter.
Keen to hear others thoughts on this?


Users / Re: In-wall touch screen
« on: January 18, 2013, 10:42:31 am »

POE from my switch stepped down to 5v.
When they launched the Touchpad here it was around the same time they decided to pack it in so I picked up mine for $99


Users / Re: In-wall touch screen
« on: January 18, 2013, 10:18:56 am »
Ok ok! :P

Dirty hacks so far but nothing a little plaster/paint wont fix :P

Users / Re: In-wall touch screen
« on: January 17, 2013, 09:19:37 am »
Hey Jamo,

Just thought I would chime in here, I have a HP Touchpad mounted in my wall. I use a Modified USB cable to a POE Step down convertor that then plugs into my Switch.
It works rather well running android. I have just upgraded to CM10 as qOrbiter is meant to be a little bit more stable on it. So far I think the Linuxmce Orbiter posted here:,13064.0.html is a little more reliable.

I will post pics later if interested.


Users / Re: LinuxMCE community, lets talk.
« on: November 11, 2012, 04:22:10 am »
How about a way to import a backup pre-wizard?

Users / Pioneer Receivers RS232 On issue work around.
« on: October 30, 2012, 06:36:05 pm »
Hey All,
This is just an FYI for anyone else who has a Pioneer receiver and wants to control it via RS232.
I have a VSX-23 and found that no matter what I did I couldn't get it to turn on using an Orbiter. Turns out you must first send a <CR> wait 100ms Then issue the on Command.
So I had to change the Power on Code in A/V Properties to



Users / Re: Android QOrbiter
« on: July 26, 2012, 07:04:53 am »
Just an update in the hopes someone may be able to help me.
I have been trying to figure out why qOrbiter would work when it is freshly installed (config changed to suit my setup). But fail every time after...

These are my logs;

Success start :

When pressing Exit Orbiter :

Failed start :

I will keep plodding away and report here if I am successful :P


Users / Re: Android QOrbiter
« on: July 25, 2012, 04:15:26 pm »
Just wondering if anyone has got this working on a HP Touchpad w/ android (CM9)?
I have just got my touchpad back, and have been trying to get it to work but to no avail :/
Trying to get debug logs out of it now..


Users / Ubiquiti Aircam
« on: June 13, 2012, 02:15:17 pm »
Hey All,
Not sure if anyone would be interested in this, but a friend an I have been writing a GSD for the Aircam.

So far this is what we have (it is functional, sort of).

For the most part we just replicated the settings for the Axis Camera but the Get Video frame is different (as above).
We did have to install libwww-mechanize-ruby and add a new parameter for the IP Address because we couldn't figure out how to extract that easily. Device 229 on my system.
Any feedback / advise to make it better would be appreciated.
FWIW the air cams use cookies. If Y'all don't mind I will make a wiki entry.


Users / Re: USB UIRT IR Issues!
« on: December 30, 2011, 05:25:21 am »
I still can't seem to figure this out, any advise/ideas would be greatly appreciated!
Rebuilt the image for the MD and still getting the same problem :(


Pages: [1] 2 3 ... 7