Messages

1

Users / New installation does not show many existing devices in network

« on: June 03, 2013, 01:15:59 am »

I re-installed a Dianemo system and the axis camera received an IP but a prompt for the camera to add/ignore it never appeared and its not listed in unknown devices.
I actually don't need this camera added (axis 212 ptz) as it doesn't seem to work with the ios orbiter which already has an app.
My main concern is that as there is no dns server on the core I am concerned the ip might rotate at some point.

How do you guys handle these cases?

Thanks!

2

Users / Re: Internet radio and audio in Dianemo

« on: June 02, 2013, 01:28:42 pm »

Hi Posed,
Yeah I have an rti multi channel amp and a virtualised soundcard. So the Dianemo can't be without the Logitech media server, so this means at least a squeeze slave software client must be installed for each zone?

Thanks!

3

Users / Internet radio and audio in Dianemo

« on: June 01, 2013, 09:35:00 pm »

Hey guys,
Gotta re-install from a hardware issue and I never got around to setting up internet radio or ripped audio on a dianemo I setup for someone.

The wiki explains how to setup LMS, but I am unclear on the need for any actual squeeze players?
Is there any way to broadcast net radio/ripped music to a virtualized sound card with an amp pumping music to several rooms without buying any hardware?

Thanks!

4

Users / Atom based touch screen md

« on: January 23, 2013, 02:34:02 pm »

Does anyone know the model of the one used with the Dianemo systems? Although I see the merit in other configurations
I am stuck utilizing just one instance like this.

Thanks guys.

5

Users / Re: Touchscreen md

« on: January 17, 2013, 04:28:45 pm »

Ok, it turns out based on the info from the two posts and link that they either will use existing ipads or buy a Nexus 7/10.

So that leaves the requirements for the md, but without video Posde's suggesting is appealing, Posde do you refer to the Squeezebox Receiver (C-RM66) as the device to drive with a pad orbitor?

Thanks a lot guys!

6

Users / Touchscreen md

« on: January 17, 2013, 03:31:15 am »

I had planned for sometime when a kitchen was done to use a tablet as an Orbiter with a frame, stuck to the wall.

Now I need to drive a tuner and play sound etc at this location, so I figure I should just use a touch panel based computer as an md. Whats the currently best option for one of these now?

Thanks!

7

Users / Re: Dianemo S: Issues setting up core on server with ATI ES1000

« on: September 17, 2012, 02:53:07 am »

Turns out 12.04.1 is what breaks it, installing from 12.04 makes it work.

8

Users / Re: ZWave Set Associations Error

« on: September 16, 2012, 05:21:58 pm »

Thanks hari,
One last question for davegravy, so I have a zstick and minimote. Excuse the noob lack of understanding but the associations in your case are then stored in the zstick and read in by your core? I assume the homeseer ware was only used temporarily and the core picked up the task of controlling them? Could I use the minimote in place of the homeseer app when I get around to this?

Thanks for the patience:)

9

Users / Re: ZWave Set Associations Error

« on: September 16, 2012, 04:32:35 am »

Hey davegravy,
I am soon to setup several of these, did you figure out your issue?

Thanks

10

Users / Dianemo S: Issues setting up core on server with ATI ES1000

« on: September 16, 2012, 12:23:02 am »

Looking through the wiki it seems this shouldn't be a problem. I am pretty sure I had it running with a 12.04 install but now each time I try with 12.04.1 once Dianemo installs it reboots with a flicker between a blank screen and the console login.

This core will never be used for viewing media, is there a way to set this up remotely or bypass the wizard and let it remain at a console login if it can't be fixed?

Thanks!

11

Users / Re: Orbiter with knock off web pads

« on: April 25, 2012, 02:29:55 pm »

Appreciate the insight. Looks like a Samsung Galaxy Tab 2 7.0 is affordable. I'll give one a whirl!


Thanks guys!

12

Users / Orbiter with knock off web pads

« on: April 24, 2012, 11:07:58 pm »

Probably a couple years ago I saw some ~$150ish web pad knock offs, anyone using something in that price range with success?
If not, what are the most economical pads people have found that work well.

I know I can use a Nok 900, but its disco'ed and expensive as hell. Seems from looking through the forum the ipad is pretty solid now, but thats expensive as hell just the same.

Thanks guys!

13

Users / Local help needed

« on: December 03, 2011, 12:44:13 pm »

Anyone local to southern Alberta region interested in helping setup a new home with mce and local to Calgary area?
I started a new and don't have the time to finish a project I started ages ago...
Contact me if so to discuss compensation.

14

Users / Re: Best choice for lighting controls in north america for use with 810

« on: September 05, 2011, 04:50:34 pm »

Thanks everyone!

15

Users / Re: Best choice for lighting controls in north america for use with 810

« on: September 04, 2011, 03:30:10 pm »

Seems both GE and Leviton make zwave products which are easily available to me.
Anyone have experience with their light switches and receptacles for example? I'd still be fine to order a Seluxit viaSENS controller and a Aeon Labs Minimote inclusion remote as Purps uses/

Thanks!