Messages

Ok with a little assistance from the Unrecognized Nic wiki entry and the latest src for the e1000e from http://sourceforge.net/projects/e1000/files/?source=navbar I have managed to create a new MD, the NUC boots, and I am presented with Failed to setup X.

I will now try to compile the modules for the intel graphics card HD 4000

Slampt

Hey Guys,

Just  borrowed one of these to give it a shot, firstly I tried to PXE boot it as an MD, it unfortunately kernel panics;

Kernel Panic - not syncing: Attempt to kill init!
Pid: 1, comm: init Not tainted 2.6.32-44-generic #98-Ubuntu

Any ideas?

Sorry Posde,

Here it is;


dcerouter_1032070:/var/log/mythtv# ls -la /mnt/device/65/public/data/pvr/
total 12
drwxrwsrwx 3 root public 4096 2013-03-23 18:27 .
drwxr-xr-x 8 root public 4096 2012-05-16 00:40 ..
drwxrwsr-x 2 root public 4096 2013-03-23 17:56 livetv
-rwxrwxrwx 1 root public    0 2013-03-23 23:06 livetv.folderlock



dcerouter_1032070:/var/log/mythtv# ls -la /mnt/device/65/public/data/pvr/livetv
total 478884
drwxrwsr-x 2 root   public      4096 2013-03-23 17:56 .
drwxrwsrwx 3 root   public      4096 2013-03-23 23:13 ..

Hey Guys,

Sorry to dig up an old thread, I thought it would be better to reply to this one than start a new one.
I finally got around to installing my HDHomerun DVB-T. I had to scan for the channels manually but after that, I seem to be getting the same permissions error.


2013-03-23 17:36:55.483 TFW, Error: Opening file '/mnt/device/65/public/data/pvr/livetv/1007_20130323173654.mpg'.
         eno: Permission denied (13)
2013-03-23 17:36:55.527 TVRec(1) Error: RingBuffer '/mnt/device/65/public/data/pvr/livetv/1007_20130323173654.mpg' not open...
2013-03-23 17:36:55.618 TVRec(1) Error: CreateLiveTVRingBuffer() failed
2013-03-23 17:36:55.685 TVRec(1) Error: Failed to create RingBuffer 1
2013-03-23 17:36:55.768 TVRec(1): Changing from WatchingLiveTV to None
2013-03-23 17:36:55.646 ProcessPAT: Program not found in PAT.
         Rescan your transports.

Permissions are;

drwxrwsr--  3 root public 4096 2013-03-23 17:41 pvr


Any help would be appreciated..

Cheers
Slampt

Thanks,  I might give one a go and see how it fairs.
Should use a lot less power than my current clunker (core2duo)
The only think I was concerned about was the graphics, intel HD 4000.

Cheers
Slampt

Hey all,

Just wondering if anyone has tried using an intel nuc for an MD?
I was going to look at using one as a core, however it would require a USB Ethernet adapter.
Keen to hear others thoughts on this?

Cheers
slampt

Yup,

POE from my switch stepped down to 5v.
When they launched the Touchpad here it was around the same time they decided to pack it in so I picked up mine for $99

Cheers
Slampt

Ok ok!

Dirty hacks so far but nothing a little plaster/paint wont fix

http://www.slampt.net/wp-content/uploads/2013/01/IMG_6909.jpg

Hey Jamo,

Just thought I would chime in here, I have a HP Touchpad mounted in my wall. I use a Modified USB cable to a POE Step down convertor that then plugs into my Switch.
It works rather well running android. I have just upgraded to CM10 as qOrbiter is meant to be a little bit more stable on it. So far I think the Linuxmce Orbiter posted here: http://forum.linuxmce.org/index.php/topic,13064.0.html is a little more reliable.

I will post pics later if interested.

Slampt

How about a way to import a backup pre-wizard?

Hey All,
This is just an FYI for anyone else who has a Pioneer receiver and wants to control it via RS232.
I have a VSX-23 and found that no matter what I did I couldn't get it to turn on using an Orbiter. Turns out you must first send a <CR> wait 100ms Then issue the on Command.
So I had to change the Power on Code in A/V Properties to

<$"\r\s100m\rPO\r"$>
sleep(5)

Cheers
Slampt

Just an update in the hopes someone may be able to help me.
I have been trying to figure out why qOrbiter would work when it is freshly installed (config changed to suit my setup). But fail every time after...

These are my logs;

Success start : http://pastebin.com/raw.php?i=ss2t5bhQ

When pressing Exit Orbiter : http://pastebin.com/raw.php?i=JDp1idZd

Failed start : http://pastebin.com/raw.php?i=4TAvQUBs

I will keep plodding away and report here if I am successful

Cheers
Slampt

Just wondering if anyone has got this working on a HP Touchpad w/ android (CM9)?
I have just got my touchpad back, and have been trying to get it to work but to no avail :/
Trying to get debug logs out of it now..

Slampt

Hey All,
Not sure if anyone would be interested in this, but a friend an I have been writing a GSD for the Aircam.

So far this is what we have (it is functional, sort of).

http://pastebin.com/UsYtfgMs

For the most part we just replicated the settings for the Axis Camera but the Get Video frame is different (as above).
We did have to install libwww-mechanize-ruby and add a new parameter for the IP Address because we couldn't figure out how to extract that easily. Device 229 on my system.
Any feedback / advise to make it better would be appreciated.
FWIW the air cams use cookies. If Y'all don't mind I will make a wiki entry.

Cheers
Slampt

I still can't seem to figure this out, any advise/ideas would be greatly appreciated!
Rebuilt the image for the MD and still getting the same problem

Cheers
Slampt