Messages

Oh, and its 1004 and current as of today.

Been i while since i used my MediaTomb, and it no longer shows on my network.
Tried to to restart it,

Code Select Expand

sudo /etc/init.d/mediatomb restart
gives:

* Restarting upnp media server mediatomb                                                                                                                  [ OK ]

But log shows an error:

2012-11-12 11:15:24    INFO: Loading configuration from: /etc/mediatomb/config.xml
2012-11-12 11:15:24    INFO: Checking configuration...
2012-11-12 11:15:24    INFO: Setting filesystem import charset to UTF-8
2012-11-12 11:15:24    INFO: Setting metadata import charset to UTF-8
2012-11-12 11:15:24    INFO: Setting playlist charset to UTF-8
2012-11-12 11:15:24    INFO: Configuration check succeeded.
2012-11-12 11:15:24   ERROR: Mysql: mysql_real_query() failed: mysql_error (144): "Table './pluto_mediatomb/mt_cds_object' is marked as crashed and last (automatic?) repair failed"; query: SELECT MAX(`id`) FROM `m$

Webadm page for MediaTomb localhost port 49153(as stated in my config) gives a 505: internal server error.

Any pointers much appreciated

I havent changed anything, but my isp has done someting, not sure what. And now it works again.......

A few weeks ago, i started noticing the internet being unstable on my tv(Sony Bravia). Few days later all my WLan clients started disconnecting and reconnecting to my WLan, had internet while it was connected.
Now all my wired clients have lost internet, wlan still the same(almost useless with the constant disc.).
Its a 1004 hybrid, internet is fine on the core. The net is on its own net card, to a router(Jensen NL 1005 v2 http://www.jensenscandinavia.com/products.asp?Search=3&Language=English) then divided into another router and a wlan AP(D-Link DAP-1353 http://www.dlink.co.in/products/?pid=142).

lspci ethernet:

03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

dmesg | tail

[16715.148625] IPv4 packet denied: IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=192.168.80.1 DST=192.168.80.1 LEN=112 TOS=0x00 PREC=0xC0 TTL=64 ID=43092 PROTO=ICMP TYPE=3 CODE=1 [SRC=192.168.80.1 DST=192.168.80.131 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=11596 SEQ=1 ]
[16724.008415] IPv4 packet denied: IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=192.168.80.1 DST=192.168.80.1 LEN=112 TOS=0x00 PREC=0xC0 TTL=64 ID=43095 PROTO=ICMP TYPE=3 CODE=1 [SRC=192.168.80.1 DST=192.168.80.133 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=12109 SEQ=1 ]
[16738.604153] IPv4 packet denied: IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=192.168.80.1 DST=192.168.80.1 LEN=112 TOS=0x00 PREC=0xC0 TTL=64 ID=43098 PROTO=ICMP TYPE=3 CODE=1 [SRC=192.168.80.1 DST=192.168.80.131 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=61262 SEQ=1 ]
[16749.115425] IPv4 packet denied: IN=eth1 OUT= MAC= SRC=188.113.114.146 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54
[16762.052147] IPv4 packet denied: IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=192.168.80.1 DST=192.168.80.1 LEN=112 TOS=0x00 PREC=0xC0 TTL=64 ID=43356 PROTO=ICMP TYPE=3 CODE=1 [SRC=192.168.80.1 DST=192.168.80.131 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=40530 SEQ=1 ]
[16765.497788] type=1505 audit(1345398760.528:88):  operation="profile_replace" pid=21379 name="/usr/sbin/mysqld"
[16772.081363] IPv4 packet denied: IN=eth1 OUT= MAC=00:02:44:82:4b:54:00:01:5c:23:74:81:08:00 SRC=195.249.27.75 DST=188.113.114.146 LEN=52 TOS=0x00 PREC=0x00 TTL=59 ID=30630 DF PROTO=TCP SPT=80 DPT=59758 WINDOW=9384 RES=0x00 ACK FIN URGP=0
[16777.191699] type=1505 audit(1345398772.220:89):  operation="profile_replace" pid=21963 name="/usr/sbin/mysqld"
[16784.059198] IPv4 packet denied: IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:01:5c:23:74:81:08:00 SRC=188.113.112.1 DST=255.255.255.255 LEN=372 TOS=0x00 PREC=0x00 TTL=64 ID=23233 PROTO=UDP SPT=67 DPT=68 LEN=352
[16788.841984] type=1505 audit(1345398783.872:90):  operation="profile_replace" pid=22509 name="/usr/sbin/mysqld"

Somthing is wrong, and im not sure as to where to start..... Tried skipping the first router and the wlan(disconnected them and powered them off), still no dice.....

So any help much welcomed

Strange, created a folder with sudo, then tried to log in with sftp. And then i could create a folder....
Not sure if its the "sudo" folder or not, but now i can write stuff on ~public

confusing but fixed Thx for the reply!

--------
edit
ooops my bad! that was ~/public, not /home/public/

So still no dice, will try from a Windoze comp when i get my hands on one.

got 1004, and cant add my files to public folder. Or am i just going at it the wrong way......

Cant log in via ftp to add, can only log in and write to my own home folders.
smb is the same, cant authenticate. username and password doesent lett me logg inn.
and when i go to desktop on the core, i have no permission to write to public folder. So is there a correct permission setting for public folders(subfolders)? Or is there some other settings im missing?

Fiddled a little, then installed 10.04. And now it works

Thx for all good answers, landed on access point outside the box:

http://www.dlink.co.uk/cs/Satellite?c=Product_C&childpagename=DLinkEurope-GB%2FDLProductCarouselMultiple&cid=1197319181546&p=1197318962342&packedargs=locale%3D1195806691854&pagename=DLinkEurope-GB%2FDLWrapper

Better range, and my old Wlan card had no N-draft support. And i can set up multiple SSID(PSP, DSI and portable computers don't support the same settings), with MAC address filtering.
Now i just need to get my on-board lan card to work for my internal net

Thx again!

Installed 810, on gigabyte GA-870A-UD3 motherboard

http://www.gigabyte.eu/products/product-page.aspx?pid=3753#sp

External net on pci-card works well, onboard internal does not.

Tried to switch internal/external, then external did not work. So im guessing the onboard chip does not agree with linuxmce/kubuntu.

Onboard LAN chip:

Realtek 8111D/E chip (10/100/1000 Mbit)

So how can i change driver, and can i only change driver without changing any settings in LMCE? Or do i only change something in LMCE?
So where do i go from here?

thx in advance!

looking at this one now:

http://www.tp-link.com/en/products/details/?categoryid=242&model=TL-WA701ND#spec

nice price, and power over ethernet. But cant see anything about DHCP.....

ok, thx.

There are access point that doesent give DHCP thru? How in the deep dark forest do i know who?

Im trying to set up a Core, and got the external/internet to work on the box, but it wont rout it further.
Got the onboard to deal with internal net, and added a PCI-Wlan card.
But non of the internal nets seem to work, and cant realy find any settings for the wlan part.

So my question is, can i set mu core up to be a wlan router? or do i need a separate Wlan router?

thx

Well whattaya know! now it seems to work, not sure what was wrong. But the dvd got installed properly on my second try yesterday. Netinstall failed on same point all tries this weekend.

Well well, it works, but i dunno why.... Marked as Solvedish

hmm, got the 24255 going now. refused to boot up properly the first time, but now "Sarah" seems finished, and im waiting for som background task to finish, so i can press "Start using the system"

<fingers crossed>

Try the following snapshot
still no links for me.com uxmce.iptp.org/snapshots/LinuxMCE-8.10-24346-i386.iso

I installed it succesfully.

Tried DVD snapshots 8.10.24255 and 8.10.24189, but they did not do it for me But will try 24346 this evening, or tomorrow. Thx for the tip