News:

Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com

Main Menu

Upgrade .39 to .40 broke instalation & new instalation f

Started by dean_za, September 07, 2006, 08:16:42 AM

Previous topic - Next topic

archived

I have a running system which upgraded happily from about .37 I think , its been over a year. When the upgrade to .40 took place my media directors simply would not get past the black screen. Both my media directors are MSI Hetis 865GV-E here is a link

http://www.msicomputer.com/product/p_spec.asp?model=Hetis_865GV-E&class=npc


Below is the output of lspci -vv

0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
       Latency: 0
       Region 0: Memory at fe800000 (32-bit, prefetchable) [size=4M]
       Capabilities: [e4] #09 [1106]

0000:00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02) (prog-if 00 [VGA])
       Subsystem: Micro-Star International Co., Ltd.: Unknown device 7650
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Interrupt: pin A routed to IRQ 177
       Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
       Region 1: Memory at ffe80000 (32-bit, non-prefetchable) [size=512K]
       Region 2: I/O ports at ec00
       Capabilities: [d0] Power Management version 1
               Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])
       Subsystem: Micro-Star International Co., Ltd.: Unknown device 7650
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Interrupt: pin A routed to IRQ 177
       Region 4: I/O ports at ac00 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])
       Subsystem: Micro-Star International Co., Ltd.: Unknown device 7650
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Interrupt: pin B routed to IRQ 185
       Region 4: I/O ports at b000 [size=32]

0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
       Subsystem: Micro-Star International Co., Ltd.: Unknown device 7650
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Interrupt: pin C routed to IRQ 193
       Region 4: I/O ports at b400 [size=32]

0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])
       Subsystem: Micro-Star International Co., Ltd.: Unknown device 7650
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Interrupt: pin A routed to IRQ 177
       Region 4: I/O ports at b800 [size=32]

0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
       Subsystem: Micro-Star International Co., Ltd.: Unknown device 7650
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Interrupt: pin D routed to IRQ 201
       Region 0: Memory at ffe7b400 (32-bit, non-prefetchable) [size=1K]
       Capabilities: [50] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [58] #0a [20a0]

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
       Latency: 0
       Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
       I/O behind bridge: 00009000-00009fff
       Memory behind bridge: ffc00000-ffcfffff
       Prefetchable memory behind bridge: 10000000-100fffff
       BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
       Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0

0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
       Subsystem: Micro-Star International Co., Ltd.: Unknown device 7650
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Interrupt: pin A routed to IRQ 193
       Region 0: I/O ports at cc00
       Region 1: I/O ports at c800
       Region 2: I/O ports at c400
       Region 3: I/O ports at c000
       Region 4: I/O ports at bc00
       Region 5: Memory at 10100000 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
       Subsystem: Micro-Star International Co., Ltd.: Unknown device 7650
       Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Interrupt: pin B routed to IRQ 5
       Region 4: I/O ports at 0c00 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
       Subsystem: Micro-Star International Co., Ltd.: Unknown device 7650
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Interrupt: pin B routed to IRQ 217
       Region 0: I/O ports at d400 [size=256]
       Region 1: I/O ports at d000 [size=64]
       Region 2: Memory at ffe7be00 (32-bit, non-prefetchable) [size=512]
       Region 3: Memory at ffe7bd00 (32-bit, non-prefetchable) [size=256]
       Capabilities: [50] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
       Subsystem: Micro-Star International Co., Ltd.: Unknown device 065d
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 32 (8000ns max), Cache Line Size: 0x08 (32 bytes)
       Interrupt: pin A routed to IRQ 209
       Region 0: Memory at ffcdf000 (32-bit, non-prefetchable) [size=2K]
       Region 1: I/O ports at 9800 [size=128]
       Capabilities: [50] Power Management version 2
               Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
       Subsystem: Micro-Star International Co., Ltd.: Unknown device 065c
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 0x20 (128 bytes)
       Interrupt: pin A routed to IRQ 169
       Region 0: I/O ports at 9c00 [size=256]
       Region 1: Memory at ffcfff00 (32-bit, non-prefetchable) [size=256]
       Expansion ROM at 10000000 [disabled] [size=128K]
       Capabilities: [dc] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-//It%20is%20quite%20sad%20that%20a%20previoiusly%20plug%20and%20play%20unit%20now%20does%20not%20work%20,%20as%20I%20have%20posted%20before%20I%20believe%20something%20in%20the%20avwizard.sh%20script%20is%20not%20working%20as%20surely%20it%20should%20be%20possible%20to%20detect%20a%20failure%20to%20load%20some%20module%20and%20fall%20back%20to%20the%20vesa%20one%20so%20that%20things%20can%20continue.%20As%20I%20also%20stated%20previously%20if%20someone%20from%20pluto%20would%20like%20to%20have%20a%20look%20I%20m%20happy%20to%20assist%20as%20I%20have%20a%20non%20funtioning%20system.RegardsDean

archived

I spent about two week with upgraded pluto installation but without luck. I reinstalled it :)