VDR and WinTV-HVR 1110

[rages]

   
After long efforts, I managed to run my Hauppauge WinTV-HVR 1110, someone can give me some idea why VDRmce with the DVB-T goes to shots, while with WinXP working properly?
The PC is the same. 

Rages

[totallymaxed]

   
After long efforts, I managed to run my Hauppauge WinTV-HVR 1110, someone can give me some idea why VDRmce with the DVB-T goes to shots, while with WinXP working properly?
The PC is the same. 

Rages

Hi,

I'm not sure what you question is... but the WinTV HVR1110  is working fine but needs some modules added under LinuxMCE-0710. See here for details; http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110

All the best

Andrew

[rages]

Excuse me, maybe I have explained (I'm using google translate).
I managed to install the card, I created the channel.conf, I see all channels DVB-t but they are not fluid

[rages]

but in the vdr linuxmce there is a software decoder plugin for the budget-card?

I read this "http://www.linuxtv.org/wiki/index.php/VDR_Software_Decoder_Plugin"

[totallymaxed]

but in the vdr linuxmce there is a software decoder plugin for the budget-card?

I read this "http://www.linuxtv.org/wiki/index.php/VDR_Software_Decoder_Plugin"

Yes. All the cards we use are 'budget' cards - we do not use 'full-function' cards at all in fact.

So if your video playback is not very smooth then it is the display drivers that are most likely the problem. Please post more info on your hardware config and how you have configured it... then we should be able to help you figure out the problem.

All the best

Andrew

[rages]

dcerouter_1:~# dmesg |grep saa
[   33.253508] saa7130/34: v4l2 driver version 0.2.14 loaded
[   33.254096] saa7133[0]: found at 0000:01:08.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe9ff000
[   33.254101] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,insmod option]
[   33.254107] saa7133[0]: board init: gpio is 6400000
[   33.569649] ir-kbd-i2c: HVR 1110 detected at i2c-2/2-0071/ir0 [saa7133[0]]
[   33.608989] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   33.608996] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[   33.609002] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[   33.609007] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   33.609013] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[   33.609018] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   33.609023] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   33.609028] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   33.616902] saa7133[0]: i2c scan: found device @ 0x10  [?? ?]
[   33.632976] saa7133[0]: i2c scan: found device @ 0x96  [?? ?]
[   33.641445] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[   33.652968] saa7133[0]: i2c scan: found device @ 0xe0  [?? ?]
[   33.660914] saa7133[0]: i2c scan: found device @ 0xe2  [?? ?]
[   33.668945] saa7133[0]: i2c scan: found device @ 0xe4  [?? ?]
[   33.676944] saa7133[0]: i2c scan: found device @ 0xe6  [?? ?]
[   33.780871] tuner 2-004b: chip found @ 0x96 (saa7133[0])
[   36.665231] saa7133[0]: registered device video0 [v4l2]
[   36.665340] saa7133[0]: registered device vbi0
[   36.665447] saa7133[0]: registered device radio0
[   36.734668] saa7134_alsa: disagrees about version of symbol snd_ctl_add
[   36.734672] saa7134_alsa: Unknown symbol snd_ctl_add
[   36.734692] saa7134_alsa: disagrees about version of symbol snd_pcm_new
[   36.734694] saa7134_alsa: Unknown symbol snd_pcm_new
[   36.734740] saa7134_alsa: disagrees about version of symbol snd_card_register
[   36.734742] saa7134_alsa: Unknown symbol snd_card_register
[   36.734788] saa7134_alsa: disagrees about version of symbol snd_card_free
[   36.734790] saa7134_alsa: Unknown symbol snd_card_free
[   36.734830] saa7134_alsa: disagrees about version of symbol snd_pcm_stop
[   36.734832] saa7134_alsa: Unknown symbol snd_pcm_stop
[   36.734885] saa7134_alsa: disagrees about version of symbol snd_ctl_new1
[   36.734887] saa7134_alsa: Unknown symbol snd_ctl_new1
[   36.734994] saa7134_alsa: disagrees about version of symbol snd_card_new
[   36.734996] saa7134_alsa: Unknown symbol snd_card_new
[   36.735019] saa7134_alsa: disagrees about version of symbol snd_pcm_lib_ioctl
[   36.735021] saa7134_alsa: Unknown symbol snd_pcm_lib_ioctl
[   36.735063] saa7134_alsa: disagrees about version of symbol snd_pcm_set_ops
[   36.735065] saa7134_alsa: Unknown symbol snd_pcm_set_ops
[   36.735131] saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_integer
[   36.735133] saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_integer
[   36.735224] saa7134_alsa: disagrees about version of symbol snd_pcm_period_elapsed
[   36.735226] saa7134_alsa: Unknown symbol snd_pcm_period_elapsed
[   36.853827] DVB: registering new adapter (saa7133[0]).
dcerouter_1:~#

My hybrid/core ----------> AMD ATHLON 64 3500, 1Gb ram, NVIDIA 6600GT 128Mb, Hauppauge 1110, HD s-ata 250Gb

I use linuxmce with UI2 with alpha blending / transparency.

[totallymaxed]

dcerouter_1:~# dmesg |grep saa
[   33.253508] saa7130/34: v4l2 driver version 0.2.14 loaded
[   33.254096] saa7133[0]: found at 0000:01:08.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe9ff000
[   33.254101] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,insmod option]
[   33.254107] saa7133[0]: board init: gpio is 6400000
[   33.569649] ir-kbd-i2c: HVR 1110 detected at i2c-2/2-0071/ir0 [saa7133[0]]
[   33.608989] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   33.608996] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[   33.609002] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[   33.609007] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   33.609013] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[   33.609018] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   33.609023] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   33.609028] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   33.616902] saa7133[0]: i2c scan: found device @ 0x10  [?? ?]
[   33.632976] saa7133[0]: i2c scan: found device @ 0x96  [?? ?]
[   33.641445] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[   33.652968] saa7133[0]: i2c scan: found device @ 0xe0  [?? ?]
[   33.660914] saa7133[0]: i2c scan: found device @ 0xe2  [?? ?]
[   33.668945] saa7133[0]: i2c scan: found device @ 0xe4  [?? ?]
[   33.676944] saa7133[0]: i2c scan: found device @ 0xe6  [?? ?]
[   33.780871] tuner 2-004b: chip found @ 0x96 (saa7133[0])
[   36.665231] saa7133[0]: registered device video0 [v4l2]
[   36.665340] saa7133[0]: registered device vbi0
[   36.665447] saa7133[0]: registered device radio0
[   36.734668] saa7134_alsa: disagrees about version of symbol snd_ctl_add
[   36.734672] saa7134_alsa: Unknown symbol snd_ctl_add
[   36.734692] saa7134_alsa: disagrees about version of symbol snd_pcm_new
[   36.734694] saa7134_alsa: Unknown symbol snd_pcm_new
[   36.734740] saa7134_alsa: disagrees about version of symbol snd_card_register
[   36.734742] saa7134_alsa: Unknown symbol snd_card_register
[   36.734788] saa7134_alsa: disagrees about version of symbol snd_card_free
[   36.734790] saa7134_alsa: Unknown symbol snd_card_free
[   36.734830] saa7134_alsa: disagrees about version of symbol snd_pcm_stop
[   36.734832] saa7134_alsa: Unknown symbol snd_pcm_stop
[   36.734885] saa7134_alsa: disagrees about version of symbol snd_ctl_new1
[   36.734887] saa7134_alsa: Unknown symbol snd_ctl_new1
[   36.734994] saa7134_alsa: disagrees about version of symbol snd_card_new
[   36.734996] saa7134_alsa: Unknown symbol snd_card_new
[   36.735019] saa7134_alsa: disagrees about version of symbol snd_pcm_lib_ioctl
[   36.735021] saa7134_alsa: Unknown symbol snd_pcm_lib_ioctl
[   36.735063] saa7134_alsa: disagrees about version of symbol snd_pcm_set_ops
[   36.735065] saa7134_alsa: Unknown symbol snd_pcm_set_ops
[   36.735131] saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_integer
[   36.735133] saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_integer
[   36.735224] saa7134_alsa: disagrees about version of symbol snd_pcm_period_elapsed
[   36.735226] saa7134_alsa: Unknown symbol snd_pcm_period_elapsed
[   36.853827] DVB: registering new adapter (saa7133[0]).
dcerouter_1:~#

My hybrid/core ----------> AMD ATHLON 64 3500, 1Gb ram, NVIDIA 6600GT 128Mb, Hauppauge 1110, HD s-ata 250Gb

I use linuxmce with UI2 with alpha blending / transparency.

Ok... re run the AVwizard and select UI2 + Overlay... and I think you will see a big improvement ;-)

Andrew

[rages]

The problem has slightly improved but not resolved.
You have other suggestions?

[totallymaxed]

The problem has slightly improved but not resolved.
You have other suggestions?

Well the only other options would be to see if there is a performance bottleneck on the motherboard or graphics card. We have never tested the 6600 card so i  have no experience of that specific card for example.

Andrew