[RC2] Still don't have luck with GC100

[nite_man]

Hi,

I still cannot configure GC100 to work properly under 0710 RC2.  I followed by that wiki instruction - http://wiki.linuxmce.org/index.php/Gc100. Have a look those two screen-shot to see my configuration - http://www.mediafire.com/?tmyozm4mnug and http://www.mediafire.com/?u195iixmmwy.

In the GC100 log I see just those messages:

Code: [Select]

========== NEW LOG SECTION ==========
1       06/12/08 23:40:27       35 (spawning-device)    Starting... 1
1       06/12/08 23:40:27       35 (spawning-device)    Found /usr/pluto/bin/LaunchGC100.sh
05      06/12/08 23:40:32.894           Creating child 36 <0x2b710c5adad0>
05      06/12/08 23:40:32.894           Note: Device manager has attached a device of type 1912 that this has no custom event handler for.  It will not fire events. <0x2b710c5adad0>
05      06/12/08 23:40:32.894           Note: Device manager has attached a device of type 1912 that this has no custom handler for.  This is normal for IR. <0x2b710c5adad0>
05      06/12/08 23:40:32.894           Creating child 37 <0x2b710c5adad0>
05      06/12/08 23:40:32.894           Note: Device manager has attached a device of type 1912 that this has no custom event handler for.  It will not fire events. <0x2b710c5adad0>
05      06/12/08 23:40:32.894           Note: Device manager has attached a device of type 1912 that this has no custom handler for.  This is normal for IR. <0x2b710c5adad0>
05      06/12/08 23:40:32.894           Creating child 38 <0x2b710c5adad0>
05      06/12/08 23:40:32.894           Note: Device manager has attached a device of type 1912 that this has no custom event handler for.  It will not fire events. <0x2b710c5adad0>
05      06/12/08 23:40:32.894           Note: Device manager has attached a device of type 1912 that this has no custom handler for.  This is normal for IR. <0x2b710c5adad0>
05      06/12/08 23:40:32.894           Creating child 39 <0x2b710c5adad0>
05      06/12/08 23:40:32.894           Note: Device manager has attached a device of type 1932 that this has no custom event handler for.  It will not fire events. <0x2b710c5adad0>
05      06/12/08 23:40:32.894           Note: Device manager has attached a device of type 1932 that this has no custom handler for.  This is normal for IR. <0x2b710c5adad0>                        
When I send some command from the A/V property page following messages appear only in the DCERouter.log:

Code: [Select]

08      06/12/08 23:41:54.607           Received Message from 0 (unknown / ) to 35 (gc100 / Living Room/Family Room), type 1 id 191 Command:Send Code, retry none, parameters: <0x50820950>
08      06/12/08 23:41:54.607             Parameter 9(Text): 0000 006a 0022 0002 0158 00b0 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 05fe 0158 0057 0016 0e6f <0x50820950>
05      06/12/08 23:41:54.659           Socket::ReceiveData 0xc9a240 failed, bytes left 0 start: 440000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 60 Incoming_Conn Socket 60 127.0.0.1 <0x50820950>
05      06/12/08 23:41:54.659           Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 60 127.0.0.1 <0x50820950>
05      06/12/08 23:41:54.659           TCPIP: Closing connection to -1003 (Router Dev #0) 0xc9a240 m_Socket: -1 <0x50820950>
05      06/12/08 23:41:54.659           Router::RemoveAndDeleteSocket 0xc9a240 -1003 <0x50820950>But I don't see any messages in the LaunchGC100.sh.log.

Any suggestion ho to solve that? Does somebody manage to configure IR sensors of GC100 in RC2?

Thanks in advance.
                                                                               

[Zaerc]

I have set my gc100 (with the b0rked 2.4 firmware) up manually using a browser to use an IP in the 192.168.80.X range, now whenever I do a reinstall I just add it manually (IP+MAC) in the web admin.  The plus side is that the device remains unlocked.  I'm not using the IR at the moment though, but the rs232 port and an input sensor works for me.  I had to replace the "generic I/O sensor" with something more useful though (like the doorbell sensor).

[nite_man]

I installed my gc100 using patched gc100-config.pl. It found MAC correctly and set device unlock. The problem with IR functionality. It worked in beta 1 perfectly. But since beta 4 I cannot configure it properly. When the IR command is sent from LinuxMCE admin site the green indicator of IR port is blinking and IT emitter red diode is blinking too. So, the hardware is ok. Something wrong with software. It'd be good to get more information about configuration GC100 from people who implemented new functionality. Hope they tested it with IR too.