News:

Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com

Main Menu

Supporting the ACT Solutions ZCU201 USB Z-wave Interface

Started by totallymaxed, January 04, 2008, 12:59:34 AM

Previous topic - Next topic

totallymaxed

The new ACT Solutions ZCU201 USB Z-wave Interface uses the SPCP825A USB to UART Controller chip

http://w3.sunplus.com/ShowFeature.asp?body=SPCP825A-001B

The SPCP825A currently has no USB driver support for Linux and therefore the ZCU201 is not detected when attached to a USB port. ACT Solutions have kindly provided me with the source to an Open driver for the SPCP825A to enable a working driver to be developed. As tar as I know this source is working but not fully debugged.

If anyone in the Developer forum would be interested in looking at this driver source to see if a working driver could be put together please get in touch and I will make it available to you.

Let me know if your interested in working on this?

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses [url="http://forum.linuxmce.org/index.php?topic=14026.0"]http://forum.linuxmce.org/index.php?topic=14026.0[/url]

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: [url="http://wp.me/P4KgIc-5P"]http://wp.me/P4KgIc-5P[/url]

Facebook: [url="https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465"]https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465[/url]

[url="http://www.dianemo.co.uk"]http://www.dianemo.co.uk[/url]

ddamron

Would if I could, but can't so I won't.  :-\
(I don't know C++ well enough)

Dan
The only intuitive interface is the nipple.  After that it's all learned.
My other computer is your windows box.
I'm out of my mind.  Back in 5 minutes.
Q:  What's Red and smells like blue paint?

A:  Red Paint.

eloy

Quote from: ddamron on January 04, 2008, 02:59:36 AM
Would if I could, but can't so I won't.  :-\
(I don't know C++ well enough)

I bet the sample driver is written in C, not C++. You know C? ;-)

tschak909


totallymaxed

Quote from: tschak909 on January 04, 2008, 05:58:54 AM
totallymaxed, gimme. :-)

-Thom


Hi Thom,

Private message me some where to ftp it to or your email address (its not big) and I'll send it later this morning. :-)

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses [url="http://forum.linuxmce.org/index.php?topic=14026.0"]http://forum.linuxmce.org/index.php?topic=14026.0[/url]

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: [url="http://wp.me/P4KgIc-5P"]http://wp.me/P4KgIc-5P[/url]

Facebook: [url="https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465"]https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465[/url]

[url="http://www.dianemo.co.uk"]http://www.dianemo.co.uk[/url]

ddamron

Actually, Send it to me anyway, you already have my ftp info... :)

Thanks!

Dan
The only intuitive interface is the nipple.  After that it's all learned.
My other computer is your windows box.
I'm out of my mind.  Back in 5 minutes.
Q:  What's Red and smells like blue paint?

A:  Red Paint.

totallymaxed

Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses [url="http://forum.linuxmce.org/index.php?topic=14026.0"]http://forum.linuxmce.org/index.php?topic=14026.0[/url]

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: [url="http://wp.me/P4KgIc-5P"]http://wp.me/P4KgIc-5P[/url]

Facebook: [url="https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465"]https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465[/url]

[url="http://www.dianemo.co.uk"]http://www.dianemo.co.uk[/url]

totallymaxed

Quote from: eloy on January 04, 2008, 05:53:36 AM
Quote from: ddamron on January 04, 2008, 02:59:36 AM
Would if I could, but can't so I won't.  :-\
(I don't know C++ well enough)

I bet the sample driver is written in C, not C++. You know C? ;-)

Yeah its C your right... no one really does much driver development in C++ :-)
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses [url="http://forum.linuxmce.org/index.php?topic=14026.0"]http://forum.linuxmce.org/index.php?topic=14026.0[/url]

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: [url="http://wp.me/P4KgIc-5P"]http://wp.me/P4KgIc-5P[/url]

Facebook: [url="https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465"]https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465[/url]

[url="http://www.dianemo.co.uk"]http://www.dianemo.co.uk[/url]

totallymaxed

The new ACT Solutions ZCU201 has the following ID's that identify it to the Core;

Vendor ID is 04FC and Product ID is 0201.
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses [url="http://forum.linuxmce.org/index.php?topic=14026.0"]http://forum.linuxmce.org/index.php?topic=14026.0[/url]

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: [url="http://wp.me/P4KgIc-5P"]http://wp.me/P4KgIc-5P[/url]

Facebook: [url="https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465"]https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465[/url]

[url="http://www.dianemo.co.uk"]http://www.dianemo.co.uk[/url]

coley

ok, gonna dip my toe in here, I should be able to help with some dev/dbg.
- firstly where can I buy the ZCU201, I've been reading about it from ACT for ages but don't know who supplies it. I've googled and found a few places that supply it - any recommendations? I'm in Ireland.
- next, totallymaxed, can I get the src please?

thx,
-Coley.
~ 12.04 Alpha: [url="http://linuxmce.iptp.org/snapshots"]http://linuxmce.iptp.org/snapshots[/url]
~ 10.04 Final: [url="http://linuxmce.iptp.org/release/LinuxMCE-1004-final.iso"]http://linuxmce.iptp.org/release/LinuxMCE-1004-final.iso[/url]
~ My setup: [url="http://wiki.linuxmce.org/index.php/User:Coley"]http://wiki.linuxmce.org/index.php/User:Coley[/url]

totallymaxed

Quote from: coley on January 04, 2008, 06:01:51 PM
ok, gonna dip my toe in here, I should be able to help with some dev/dbg.
- firstly where can I buy the ZCU201, I've been reading about it from ACT for ages but don't know who supplies it. I've googled and found a few places that supply it - any recommendations? I'm in Ireland.
- next, totallymaxed, can I get the src please?

thx,
-Coley.

Hi Coley,

I'm not sure who might be stocking it here in Europe currently. Someone else here might want to comment on this. My company will be stocking in the near future for our own installations and when we do we could supply you with a unit.

Send me a private message with your email address or an ftp server and i will send the source to you.

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses [url="http://forum.linuxmce.org/index.php?topic=14026.0"]http://forum.linuxmce.org/index.php?topic=14026.0[/url]

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: [url="http://wp.me/P4KgIc-5P"]http://wp.me/P4KgIc-5P[/url]

Facebook: [url="https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465"]https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465[/url]

[url="http://www.dianemo.co.uk"]http://www.dianemo.co.uk[/url]

hari

rock your home - [url="http://www.agocontrol.com"]http://www.agocontrol.com[/url] home automation

totallymaxed

Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses [url="http://forum.linuxmce.org/index.php?topic=14026.0"]http://forum.linuxmce.org/index.php?topic=14026.0[/url]

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: [url="http://wp.me/P4KgIc-5P"]http://wp.me/P4KgIc-5P[/url]

Facebook: [url="https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465"]https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465[/url]

[url="http://www.dianemo.co.uk"]http://www.dianemo.co.uk[/url]

ddamron

Hari and Totallymaxed,

You're both welcom to use my FTP if required.

Totallymaxed has the url/user/pass...

Dan
The only intuitive interface is the nipple.  After that it's all learned.
My other computer is your windows box.
I'm out of my mind.  Back in 5 minutes.
Q:  What's Red and smells like blue paint?

A:  Red Paint.

totallymaxed

Quote from: ddamron on January 05, 2008, 01:00:42 PM
Hari and Totallymaxed,

You're both welcom to use my FTP if required.

Totallymaxed has the url/user/pass...

Dan

Hey thanks Dan.

Hari upped the file size limit on his upload page... and all was ok.

Andrew

Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses [url="http://forum.linuxmce.org/index.php?topic=14026.0"]http://forum.linuxmce.org/index.php?topic=14026.0[/url]

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: [url="http://wp.me/P4KgIc-5P"]http://wp.me/P4KgIc-5P[/url]

Facebook: [url="https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465"]https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465[/url]

[url="http://www.dianemo.co.uk"]http://www.dianemo.co.uk[/url]