« previous next »
Pages: [1]

Author Topic: performance takes a hit when starting md  (Read 5942 times)

maverick0815

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 858
    • View Profile
performance takes a hit when starting md
« on: February 15, 2016, 09:19:24 pm »
I found out, when I start my MD, I need to do a reload router after its booted up, otherwise the whole system slows down to a crawl. Videoplayback on either core or MD experiences frame drops, or jumps. UI becomes totally unresponsive.
Have you guys seen that too?
Logged

Marie.O

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3676
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: performance takes a hit when starting md
« Reply #1 on: February 15, 2016, 10:42:12 pm »
I very rarely restart the MD. One of the reasons can be that a couple of devices are now back up and running and need to do "stuff". I would look at DCERouter.log and see if anything pops out.
Logged

maverick0815

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 858
    • View Profile
Re: performance takes a hit when starting md
« Reply #2 on: February 16, 2016, 08:20:24 pm »
Well, so far I can show only this:

Quote
The target device 32 (routed to 32) has not registered. <0xb60b1b40>
05   02/16/16 20:10:48.257      The target device 35 (routed to 35) has not registered. <0xb60b1b40>
05   02/16/16 20:10:48.257      The target device 45 (routed to 45) has not registered. <0xb60b1b40>
08   02/16/16 20:10:48.274      Received Message from 55 (Disk Drive / Beamer) to Media Plug-in(10), type 1 id  831 Command:Refresh List of Online Devices, retry none, parameters: <0xb2afeb40>
05   02/16/16 20:10:48.303      Socket::ReceiveData 0xb5753a48 failed, bytes left 0 start: 738139 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 79 Incoming_Conn Socket 79 ::ffff:127.0.0.1 <0x9b84cb40>
05   02/16/16 20:10:48.303      Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 79 ::ffff:127.0.0.1 <0x9b84cb40>
05   02/16/16 20:10:48.303      TCPIP: Closing connection to -1003 (Router Dev #0) 0xb5753a48 m_Socket: -1 <0x9b84cb40>
05   02/16/16 20:10:48.303      Router::RemoveAndDeleteSocket 0xb5753a48 -1003 <0x9b84cb40>
08   02/16/16 20:10:48.763      Received Message from 15 (App Server / TV-Set) to 15 (App Server / TV-Set), type 1 id 812 Command:Application Exited, retry none, parameters: <0xb0afab40>
08   02/16/16 20:10:48.763        Parameter 227(PID): 23333 <0xb0afab40>
08   02/16/16 20:10:48.763        Parameter 228(Exit Code): 0 <0xb0afab40>
08   02/16/16 20:10:53.804      Received Message from 50 (HAL / Beamer) to General Info Plug-in(4), type 1 id  808 Command:Get Unused Serial Ports, retry none, parameters: <0x76febb40>
08   02/16/16 20:10:53.804        Parameter 2(PK_Device): 50 <0x76febb40>
08   02/16/16 20:10:53.804        Parameter 5(Value To Assign):  <0x76febb40>
08   02/16/16 20:10:53.925      Received Message from 20 (OnScreen Orbiter / TV-Set) to 20 (OnScreen Orbiter / TV-Set), type 1 id 192 Command:On, retry none, parameters: <0xab06bb40>
08   02/16/16 20:10:53.925        Parameter 21(Force): 1 <0xab06bb40>
08   02/16/16 20:10:53.925        Parameter 97(PK_Pipe): 0 <0xab06bb40>
08   02/16/16 20:10:53.925        Parameter 98(PK_Device_Pipes):  <0xab06bb40>
08   02/16/16 20:10:53.927      Received Message from 20 (OnScreen Orbiter / TV-Set) to 10 (Media Plug-in / TV-Set), type 1 id 43 Command:MH Play Media, retry none, parameters: <0x777ecb40>
08   02/16/16 20:10:53.927        Parameter 2(PK_Device): 29 <0x777ecb40>
08   02/16/16 20:10:53.927        Parameter 29(PK_MediaType): 1 <0x777ecb40>
08   02/16/16 20:10:53.927      Received Message from 20 (OnScreen Orbiter / TV-Set) to 19 (The core/hybrid / TV-Set), type 1 id 192 Command:On, retry none, parameters: <0xa405db40>
08   02/16/16 20:10:53.927        Parameter 21(Force): 1 <0xa405db40>
08   02/16/16 20:10:53.927        Parameter 97(PK_Pipe): 0 <0xa405db40>
08   02/16/16 20:10:53.927        Parameter 98(PK_Device_Pipes):  <0xa405db40>
08   02/16/16 20:10:53.927        Parameter 125(Already processed): 1 <0xa405db40>
05   02/16/16 20:10:53.927      The target device 19 (routed to 19) has not registered. <0xb60b1b40>
01   02/16/16 20:10:53.928      TTTT Final Sort! <0x86021b40>
01   02/16/16 20:10:53.928      TTTT Final Sort End! <0x86021b40>
01   02/16/16 20:10:53.928      TTTT StartMedia - Main function start <0x86021b40>
01   02/16/16 20:10:53.929      TTTT StartMedia OutputZone begin. <0x86021b40>
01   02/16/16 20:10:53.929      debug_stream_end MediaStream::MediaStream c1 1001/0xa364520 source 29 <0x86021b40>
01   02/16/16 20:10:53.929      TTTT StartMedia OutputZone end. <0x86021b40>
01   02/16/16 20:10:53.929      TTTT StartMedia OutputZone - MediaStream - Begin <0x86021b40>
05   02/16/16 20:10:53.929      MediaStream::GetCurrentMediaFile - no file <0x86021b40>
01   02/16/16 20:10:53.929      TTTT StartMedia - OutputZone - MediaStream - end. <0x86021b40>
01   02/16/16 20:10:53.929      TTTT StartMedia pMediaStream Start <0x86021b40>
01   02/16/16 20:10:53.929      TTTT StartMedia - pMediaStream - LoadStreamAttributes begin <0x86021b40>
05   02/16/16 20:10:53.930      MediaStream::GetCurrentMediaFile - no file <0x86021b40>
01   02/16/16 20:10:53.930      TTTT StartMedia - pMediaStream - LoadStreamAttributes end <0x86021b40>
07   02/16/16 20:10:53.930      Event #19 has no handlers <0xa1858b40>
07   02/16/16 20:10:53.930      Received Message from 10 (Media Plug-in / TV-Set) to -1001 (unknown / ), type 2 id 19 Event:Watching Media, retry none, parameters: <0xa1858b40>
07   02/16/16 20:10:53.930        Parameter 27(PK_Room): 3 <0xa1858b40>
05   02/16/16 20:10:53.931      MediaStream::GetCurrentMediaFile - no file <0x86021b40>
05   02/16/16 20:10:53.931      Media_Plugin::CheckForAlternatePipes no destination for EA 1 TV-Set <0x86021b40>
05   02/16/16 20:10:53.931      Media_Plugin::HandleOnOffs Also turning on MD and OSD <0x86021b40>
05   02/16/16 20:10:53.931      MediaStream::GetCurrentMediaFile - no file <0x86021b40>
08   02/16/16 20:10:53.932      Received Message from 10 (Media Plug-in / TV-Set) to 19 (The core/hybrid / TV-Set), type 1 id 192 Command:On, retry none, parameters: <0xa1858b40>
08   02/16/16 20:10:53.932        Parameter 97(PK_Pipe): 0 <0xa1858b40>
08   02/16/16 20:10:53.932        Parameter 98(PK_Device_Pipes):  <0xa1858b40>
05   02/16/16 20:10:53.932      The target device 19 (routed to 19) has not registered. <0xb60b1b40>
08   02/16/16 20:10:53.933      Received Message from 10 (Media Plug-in / TV-Set) to 20 (OnScreen Orbiter / TV-Set), type 1 id 192 Command:On, retry none, parameters: <0xa1858b40>
08   02/16/16 20:10:53.933        Parameter 97(PK_Pipe): 0 <0xa1858b40>
08   02/16/16 20:10:53.933        Parameter 98(PK_Device_Pipes):  <0xa1858b40>
08   02/16/16 20:10:53.934      Received Message from 10 (Media Plug-in / TV-Set) to 29 (MythTV Player / TV-Set), type 1 id 192 Command:On, retry none, parameters: <0xa1858b40>
08   02/16/16 20:10:53.934        Parameter 97(PK_Pipe): 0 <0xa1858b40>
08   02/16/16 20:10:53.934        Parameter 98(PK_Device_Pipes):  <0xa1858b40>
08   02/16/16 20:10:53.936      Received Message from 10 (Media Plug-in / TV-Set) to 20 (OnScreen Orbiter / TV-Set), type 1 id 242 Command:Set Now Playing, retry none, parameters: <0xa1858b40>
08   02/16/16 20:10:53.936        Parameter 3(PK_DesignObj): 48,4898,47,128,224,242 <0xa1858b40>
08   02/16/16 20:10:53.936        Parameter 5(Value To Assign): Not available <0xa1858b40>
08   02/16/16 20:10:53.936        Parameter 9(Text): Not available <0xa1858b40>
08   02/16/16 20:10:53.936        Parameter 29(PK_MediaType): 1 <0xa1858b40>
08   02/16/16 20:10:53.936        Parameter 41(StreamID): 1001 <0xa1858b40>
08   02/16/16 20:10:53.936        Parameter 48(Value): 0 <0xa1858b40>
08   02/16/16 20:10:53.936        Parameter 50(Name): mythfrontend <0xa1858b40>
08   02/16/16 20:10:53.936        Parameter 103(List PK Device): 29,29,15,,1,1,0 <0xa1858b40>
08   02/16/16 20:10:53.936        Parameter 120(Retransmit): 0 <0xa1858b40>
08   02/16/16 20:10:53.931      Received Message from 28 (MythTV Plug-In / TV-Set) to 29 (MythTV Player / TV-Set), type 1 id 37 Command:Play Media, retry none, parameters: <0x95840b40>
08   02/16/16 20:10:53.941        Parameter 29(PK_MediaType): 1 <0x95840b40>
08   02/16/16 20:10:53.941        Parameter 41(StreamID): 1001 <0x95840b40>
08   02/16/16 20:10:53.941        Parameter 42(MediaPosition):  <0x95840b40>
08   02/16/16 20:10:53.941        Parameter 59(MediaURL):  <0x95840b40>
08   02/16/16 20:10:53.964      Received Message from 20 (OnScreen Orbiter / TV-Set) to 24 (Photo Screen Saver / TV-Set), type 1 id 193 Command:Off, retry none, parameters: <0x777ecb40>
08   02/16/16 20:10:53.964        Parameter 97(PK_Pipe): 0 <0x777ecb40>
05   02/16/16 20:10:53.982      Media_Plugin::StartMedia() function call completed with honors! <0x86021b40>
01   02/16/16 20:10:53.982      TTTT StartMedia - pMediaStream - end. <0x86021b40>
01   02/16/16 20:10:53.982      TTTT StartMedia main constructor end. <0x86021b40>
08   02/16/16 20:10:53.983      Received Message from 10 (Media Plug-in / TV-Set) to 20 (OnScreen Orbiter / TV-Set), type 1 id 741 Command:Goto Screen, retry none, parameters: <0xa1858b40>
08   02/16/16 20:10:53.983        Parameter 10(ID):  <0xa1858b40>
08   02/16/16 20:10:53.983        Parameter 159(PK_Screen): 128 <0xa1858b40>
08   02/16/16 20:10:53.983        Parameter 251(Interruption): 0 <0xa1858b40>
08   02/16/16 20:10:53.983        Parameter 252(Turn On): 1 <0xa1858b40>
08   02/16/16 20:10:53.983        Parameter 253(Queue): 0 <0xa1858b40>
08   02/16/16 20:10:53.989      Received Message from 29 (MythTV Player / TV-Set) to 15 (App Server / TV-Set), type 1 id 67 Command:Spawn Application, retry none, parameters: <0x7c80eb40>
08   02/16/16 20:10:53.990        Parameter 13(Filename): /usr/bin/mythfrontend <0x7c80eb40>
08   02/16/16 20:10:53.990        Parameter 50(Name): mythfrontend <0x7c80eb40>
08   02/16/16 20:10:53.990        Parameter 51(Arguments): -w   -geometry   1920x1080 <0x7c80eb40>
08   02/16/16 20:10:53.990        Parameter 94(SendOnFailure): 29 29 1 812 228 1 <0x7c80eb40>
08   02/16/16 20:10:53.990        Parameter 95(SendOnSuccess): 29 29 1 812 228 0 <0x7c80eb40>
08   02/16/16 20:10:53.990        Parameter 115(Show logo): 0 <0x7c80eb40>
08   02/16/16 20:10:53.990        Parameter 120(Retransmit): 0 <0x7c80eb40>
08   02/16/16 20:10:53.990        Parameter 126(Exclusive): 1 <0x7c80eb40>
08   02/16/16 20:10:53.990        Parameter 241(Detach): 0 <0x7c80eb40>
08   02/16/16 20:10:53.997      Received Message from 20 (OnScreen Orbiter / TV-Set) to 10 (Media Plug-in / TV-Set), type 1 id 74 Command:Bind to Media Remote, retry none, parameters: <0x777ecb40>
08   02/16/16 20:10:53.997        Parameter 2(PK_Device):  <0x777ecb40>
08   02/16/16 20:10:53.997        Parameter 3(PK_DesignObj):  <0x777ecb40>
08   02/16/16 20:10:53.997        Parameter 8(On/Off): 1 <0x777ecb40>
08   02/16/16 20:10:53.997        Parameter 25(PK_Text):  <0x777ecb40>
08   02/16/16 20:10:53.997        Parameter 39(Options):  <0x777ecb40>
08   02/16/16 20:10:53.997        Parameter 45(PK_EntertainArea): 1 <0x777ecb40>
08   02/16/16 20:10:53.997        Parameter 63(PK_Text_Synopsis):  <0x777ecb40>
08   02/16/16 20:10:53.997        Parameter 159(PK_Screen): 128 <0x777ecb40>
05   02/16/16 20:10:53.998      BoundRemote::UpdateOrbiter(): Updating object:  on device 20 with size of 0 <0x86021b40>
08   02/16/16 20:10:54.016      Received Message from 16 (HAL / TV-Set) to General Info Plug-in(4), type 1 id  808 Command:Get Unused Serial Ports, retry none, parameters: <0x707deb40>
08   02/16/16 20:10:54.016        Parameter 2(PK_Device): 16 <0x707deb40>
08   02/16/16 20:10:54.017        Parameter 5(Value To Assign):  <0x707deb40>
08   02/16/16 20:10:54.019      Received Message from 10 (Media Plug-in / TV-Set) to 20 (OnScreen Orbiter / TV-Set), type 1 id 242 Command:Set Now Playing, retry none, parameters: <0xa1858b40>
08   02/16/16 20:10:54.020        Parameter 3(PK_DesignObj): 48,4898,47,128,224,242 <0xa1858b40>
08   02/16/16 20:10:54.020        Parameter 5(Value To Assign): Not available <0xa1858b40>
08   02/16/16 20:10:54.020        Parameter 9(Text): Not available <0xa1858b40>
08   02/16/16 20:10:54.020        Parameter 29(PK_MediaType): 1 <0xa1858b40>
08   02/16/16 20:10:54.020        Parameter 41(StreamID): 1001 <0xa1858b40>
08   02/16/16 20:10:54.020        Parameter 48(Value): 0 <0xa1858b40>
08   02/16/16 20:10:54.020        Parameter 50(Name): mythfrontend <0xa1858b40>
08   02/16/16 20:10:54.020        Parameter 103(List PK Device): 29,29,15,,1,1,0 <0xa1858b40>
08   02/16/16 20:10:54.020        Parameter 120(Retransmit): 0 <0xa1858b40>
08   02/16/16 20:10:54.028      Received Message from 29 (MythTV Player / TV-Set) to 28 (MythTV Plug-In / TV-Set), type 1 id 764 Command:Set Active Menu, retry none, parameters: <0x7c80eb40>
08   02/16/16 20:10:54.028        Parameter 9(Text): live <0x7c80eb40>
08   02/16/16 20:10:54.044      Received Message from 15 (App Server / TV-Set) to 15 (App Server / TV-Set), type 1 id 812 Command:Application Exited, retry none, parameters: <0xb0afab40>
08   02/16/16 20:10:54.044        Parameter 227(PID): 25002 <0xb0afab40>
08   02/16/16 20:10:54.044        Parameter 228(Exit Code): 0 <0xb0afab40>
08   02/16/16 20:10:54.045      Received Message from 29 (MythTV Player / TV-Set) to 29 (MythTV Player / TV-Set), type 1 id 812 Command:Application Exited, retry none, parameters: <0xb0afab40>
08   02/16/16 20:10:54.045        Parameter 228(Exit Code): 0 <0xb0afab40>
08   02/16/16 20:10:54.045        Parameter 242(Comment): App_Server::SendMessageList <0xb0afab40>
08   02/16/16 20:10:54.046      Received Message from 29 (MythTV Player / TV-Set) to Media Plug-in(10), type 1 id  44 Command:MH Stop Media, retry none, parameters: <0x7c80eb40>
08   02/16/16 20:10:54.046        Parameter 2(PK_Device): 29 <0x7c80eb40>
08   02/16/16 20:10:54.046        Parameter 29(PK_MediaType): 0 <0x7c80eb40>
08   02/16/16 20:10:54.046        Parameter 44(PK_DeviceTemplate): 0 <0x7c80eb40>
08   02/16/16 20:10:54.046        Parameter 45(PK_EntertainArea):  <0x7c80eb40>
08   02/16/16 20:10:54.046        Parameter 254(Bypass Event): 0 <0x7c80eb40>
08   02/16/16 20:10:54.492      Received Message from 20 (OnScreen Orbiter / TV-Set) to 24 (Photo Screen Saver / TV-Set), type 1 id 193 Command:Off, retry none, parameters: <0x777ecb40>
08   02/16/16 20:10:54.492        Parameter 97(PK_Pipe): 0 <0x777ecb40>
05   02/16/16 20:10:55.019      Connect() failed, Error Code 111 (Connection refused)) <0x9403db40>
05   02/16/16 20:10:56.020      Connect() failed, Error Code 111 (Connection refused)) <0x9403db40>
05   02/16/16 20:10:57.021      Connect() failed, Error Code 111 (Connection refused)) <0x9403db40>
05   02/16/16 20:10:57.021      ClientSocket::Connect() not successful <0x9403db40>
05   02/16/16 20:10:57.021      void ClientSocket::Disconnect() on this socket: 0xb3301940 (m_Socket: 79) <0x9403db40>
01   02/16/16 20:10:57.021      MythBackEnd_Socket::Close <0x9403db40>
01   02/16/16 20:10:57.021      MythBackEnd_Socket::Connect failed m_bConnected=false <0x9403db40>
01   02/16/16 20:10:57.021      MythBackEnd_Socket::ProcessSocket error reconnect 0 <0x9403db40>
05   02/16/16 20:10:58.023      Connect() failed, Error Code 111 (Connection refused)) <0x9403db40>
05   02/16/16 20:10:59.023      Connect() failed, Error Code 111 (Connection refused)) <0x9403db40>
05   02/16/16 20:11:00.024      Connect() failed, Error Code 111 (Connection refused)) <0x9403db40>
05   02/16/16 20:11:00.024      ClientSocket::Connect() not successful <0x9403db40>
05   02/16/16 20:11:00.024      void ClientSocket::Disconnect() on this socket: 0xb3301d30 (m_Socket: 79) <0x9403db40>
01   02/16/16 20:11:00.024      MythBackEnd_Socket::Close <0x9403db40>
01   02/16/16 20:11:00.024      MythBackEnd_Socket::Connect failed m_bConnected=false <0x9403db40>
05   02/16/16 20:11:01.025      Connect() failed, Error Code 111 (Connection refused)) <0x9403db40>
05   02/16/16 20:11:02.026      Connect() failed, Error Code 111 (Connection refused)) <0x9403db40>
05   02/16/16 20:11:03.027      Connect() failed, Error Code 111 (Connection refused)) <0x9403db40>
05   02/16/16 20:11:03.027      ClientSocket::Connect() not successful <0x9403db40>
05   02/16/16 20:11:03.027      void ClientSocket::Disconnect() on this socket: 0xb3301bd0 (m_Socket: 79) <0x9403db40>
01   02/16/16 20:11:03.027      MythBackEnd_Socket::Close <0x9403db40>
01   02/16/16 20:11:03.027      MythBackEnd_Socket::Connect failed m_bConnected=false <0x9403db40>
01   02/16/16 20:11:03.027      MythBackEnd_Socket::SendMythString failed to reconnect <0x9403db40>
01   02/16/16 20:11:03.027      MythTV_PlugIn::ConfirmMasterBackendOk -- lost communication with it.  Forcing it to die <0x9403db40>
08   02/16/16 20:11:03.028      Received Message from 28 (MythTV Plug-In / TV-Set) to 15 (App Server / TV-Set), type 1 id 67 Command:Spawn Application, retry none, parameters: <0x95840b40>
08   02/16/16 20:11:03.028        Parameter 13(Filename): /usr/pluto/bin/ForciblyKillProcess.sh <0x95840b40>
08   02/16/16 20:11:03.028        Parameter 50(Name): killmyth <0x95840b40>
08   02/16/16 20:11:03.028        Parameter 51(Arguments): mythbackend <0x95840b40>
08   02/16/16 20:11:03.028        Parameter 94(SendOnFailure):  <0x95840b40>
08   02/16/16 20:11:03.028        Parameter 95(SendOnSuccess):  <0x95840b40>
08   02/16/16 20:11:03.028        Parameter 115(Show logo): 0 <0x95840b40>
08   02/16/16 20:11:03.028        Parameter 120(Retransmit): 0 <0x95840b40>
08   02/16/16 20:11:03.028        Parameter 126(Exclusive): 0 <0x95840b40>
08   02/16/16 20:11:03.028        Parameter 241(Detach): 1 <0x95840b40>
08   02/16/16 20:11:03.029      Received Message from 28 (MythTV Plug-In / TV-Set) to 20 (OnScreen Orbiter / TV-Set), type 1 id 741 Command:Goto Screen, retry none, parameters: <0x95840b40>
08   02/16/16 20:11:03.029        Parameter 159(PK_Screen): 185 <0x95840b40>
08   02/16/16 20:11:03.029        Parameter 163(Description): MythTV seems to have died.  I'm trying to reset it now.  If you do not see tv, try stopping the tv and restarting it.  If you still have problems, you may need to reboot. <0x95840b40>
08   02/16/16 20:11:03.029        Parameter 181(PromptToResetRouter): 0 <0x95840b40>
08   02/16/16 20:11:03.029        Parameter 182(Timeout): 20000 <0x95840b40>
08   02/16/16 20:11:03.029        Parameter 183(CannotGoBack): 1 <0x95840b40>
08   02/16/16 20:11:03.030        Parameter 251(Interruption): 0 <0x95840b40>
08   02/16/16 20:11:03.030        Parameter 252(Turn On): 0 <0x95840b40>
08   02/16/16 20:11:03.030        Parameter 253(Queue): 0 <0x95840b40>
08   02/16/16 20:11:03.037      Received Message from 10 (Media Plug-in / TV-Set) to 20 (OnScreen Orbiter / TV-Set), type 1 id 242 Command:Set Now Playing, retry none, parameters: <0xa1858b40>
08   02/16/16 20:11:03.037        Parameter 3(PK_DesignObj): 48,4898,47,128,224,242 <0xa1858b40>
08   02/16/16 20:11:03.037        Parameter 5(Value To Assign): Not available <0xa1858b40>
08   02/16/16 20:11:03.037        Parameter 9(Text): Not available <0xa1858b40>
08   02/16/16 20:11:03.037        Parameter 29(PK_MediaType): 1 <0xa1858b40>
08   02/16/16 20:11:03.037        Parameter 41(StreamID): 1001 <0xa1858b40>
08   02/16/16 20:11:03.037        Parameter 48(Value): 0 <0xa1858b40>
08   02/16/16 20:11:03.037        Parameter 50(Name): mythfrontend <0xa1858b40>
08   02/16/16 20:11:03.037        Parameter 103(List PK Device): 29,29,15,,1,1,0 <0xa1858b40>
08   02/16/16 20:11:03.037        Parameter 120(Retransmit): 0 <0xa1858b40>
08   02/16/16 20:11:03.037      Received Message from 10 (Media Plug-in / TV-Set) to 20 (OnScreen Orbiter / TV-Set), type 1 id 741 Command:Goto Screen, retry none, parameters: <0xa1858b40>
08   02/16/16 20:11:03.037        Parameter 10(ID):  <0xa1858b40>
08   02/16/16 20:11:03.037        Parameter 159(PK_Screen): 128 <0xa1858b40>
08   02/16/16 20:11:03.037        Parameter 251(Interruption): 0 <0xa1858b40>
08   02/16/16 20:11:03.037        Parameter 252(Turn On): 1 <0xa1858b40>
08   02/16/16 20:11:03.037        Parameter 253(Queue): 0 <0xa1858b40>
08   02/16/16 20:11:03.039      Received Message from 28 (MythTV Plug-In / TV-Set) to 29 (MythTV Player / TV-Set), type 1 id 38 Command:Stop Media, retry none, parameters: <0x9503fb40>
08   02/16/16 20:11:03.039        Parameter 41(StreamID): 0 <0x9503fb40>
08   02/16/16 20:11:03.039        Parameter 42(MediaPosition):  <0x9503fb40>
08   02/16/16 20:11:03.045      Received Message from 20 (OnScreen Orbiter / TV-Set) to 10 (Media Plug-in / TV-Set), type 1 id 74 Command:Bind to Media Remote, retry none, parameters: <0x777ecb40>
08   02/16/16 20:11:03.045        Parameter 2(PK_Device):  <0x777ecb40>
08   02/16/16 20:11:03.045        Parameter 3(PK_DesignObj):  <0x777ecb40>
08   02/16/16 20:11:03.045        Parameter 8(On/Off): 0 <0x777ecb40>
08   02/16/16 20:11:03.045        Parameter 25(PK_Text):  <0x777ecb40>
08   02/16/16 20:11:03.045        Parameter 39(Options):  <0x777ecb40>
08   02/16/16 20:11:03.045        Parameter 45(PK_EntertainArea): 1 <0x777ecb40>
08   02/16/16 20:11:03.045        Parameter 63(PK_Text_Synopsis):  <0x777ecb40>
08   02/16/16 20:11:03.045        Parameter 159(PK_Screen):  <0x777ecb40>
08   02/16/16 20:11:03.052      Received Message from 15 (App Server / TV-Set) to 15 (App Server / TV-Set), type 1 id 812 Command:Application Exited, retry none, parameters: <0xb0afab40>
08   02/16/16 20:11:03.052        Parameter 227(PID): 25019 <0xb0afab40>
08   02/16/16 20:11:03.052        Parameter 228(Exit Code): 0 <0xb0afab40>
08   02/16/16 20:11:03.853      Received Message from 29 (MythTV Player / TV-Set) to 15 (App Server / TV-Set), type 1 id 69 Command:Kill Application, retry none, parameters: <0x68fcfb40>
08   02/16/16 20:11:03.853        Parameter 50(Name): mythfrontend <0x68fcfb40>
08   02/16/16 20:11:03.853        Parameter 120(Retransmit): 0 <0x68fcfb40>
05   02/16/16 20:11:04.034      Connect() failed, Error Code 111 (Connection refused)) <0x9483eb40>
01   02/16/16 20:11:04.856      debug_stream_end Media_Plugin::StreamEnded ID 1001/0xa364520 delete 1 auto resume 0 resume:  <0x86021b40>
05   02/16/16 20:11:04.856      MediaStream::GetCurrentMediaFile - no file <0x86021b40>
01   02/16/16 20:11:04.856      debug_stream_end MediaStream::~MediaStream c1 1001/0xa364520 <0x86021b40>
07   02/16/16 20:11:04.857      Event #20 has no handlers <0xa1858b40>
07   02/16/16 20:11:04.857      Received Message from 10 (Media Plug-in / TV-Set) to -1001 (unknown / ), type 2 id 20 Event:Stopped Watching Media, retry none, parameters: <0xa1858b40>
07   02/16/16 20:11:04.857        Parameter 27(PK_Room): 3 <0xa1858b40>
08   02/16/16 20:11:04.859      Received Message from 10 (Media Plug-in / TV-Set) to 20 (OnScreen Orbiter / TV-Set), type 1 id 242 Command:Set Now Playing, retry none, parameters: <0xa1858b40>
08   02/16/16 20:11:04.859        Parameter 3(PK_DesignObj):  <0xa1858b40>
08   02/16/16 20:11:04.859        Parameter 5(Value To Assign):  <0xa1858b40>
08   02/16/16 20:11:04.859        Parameter 9(Text):  <0xa1858b40>
08   02/16/16 20:11:04.859        Parameter 29(PK_MediaType): 0 <0xa1858b40>
08   02/16/16 20:11:04.859        Parameter 41(StreamID): 0 <0xa1858b40>
08   02/16/16 20:11:04.859        Parameter 48(Value): 0 <0xa1858b40>
08   02/16/16 20:11:04.859        Parameter 50(Name):  <0xa1858b40>
08   02/16/16 20:11:04.859        Parameter 103(List PK Device):  <0xa1858b40>
08   02/16/16 20:11:04.859        Parameter 120(Retransmit): 0 <0xa1858b40>
08   02/16/16 20:11:04.860      Received Message from 10 (Media Plug-in / TV-Set) to 20 (OnScreen Orbiter / TV-Set), type 1 id 741 Command:Goto Screen, retry none, parameters: <0xa1858b40>
08   02/16/16 20:11:04.860        Parameter 159(PK_Screen): 1 <0xa1858b40>
08   02/16/16 20:11:04.860        Parameter 195(Location): <%=L%> <0xa1858b40>
08   02/16/16 20:11:04.860        Parameter 251(Interruption): 0 <0xa1858b40>
08   02/16/16 20:11:04.860        Parameter 252(Turn On): 0 <0xa1858b40>
08   02/16/16 20:11:04.860        Parameter 253(Queue): 0 <0xa1858b40>
08   02/16/16 20:11:04.861      Received Message from 20 (OnScreen Orbiter / TV-Set) to 10 (Media Plug-in / TV-Set), type 1 id 74 Command:Bind to Media Remote, retry none, parameters: <0x777ecb40>
08   02/16/16 20:11:04.861        Parameter 2(PK_Device):  <0x777ecb40>
08   02/16/16 20:11:04.861        Parameter 3(PK_DesignObj):  <0x777ecb40>
08   02/16/16 20:11:04.861        Parameter 8(On/Off): 1 <0x777ecb40>
08   02/16/16 20:11:04.861        Parameter 25(PK_Text):  <0x777ecb40>
08   02/16/16 20:11:04.861        Parameter 39(Options):  <0x777ecb40>
08   02/16/16 20:11:04.861        Parameter 45(PK_EntertainArea): 1 <0x777ecb40>
08   02/16/16 20:11:04.861        Parameter 63(PK_Text_Synopsis):  <0x777ecb40>
08   02/16/16 20:11:04.861        Parameter 159(PK_Screen): 128 <0x777ecb40>
05   02/16/16 20:11:04.863      Attempt to bind to a remote in an entertainment area with no media stream <0x86021b40>
08   02/16/16 20:11:04.863      Received Message from 10 (Media Plug-in / TV-Set) to 29 (MythTV Player / TV-Set), type 1 id 193 Command:Off, retry none, parameters: <0xa1858b40>
08   02/16/16 20:11:04.863        Parameter 97(PK_Pipe): -1 <0xa1858b40>
08   02/16/16 20:11:04.864      Received Message from 10 (Media Plug-in / TV-Set) to 19 (The core/hybrid / TV-Set), type 1 id 192 Command:On, retry none, parameters: <0xa1858b40>
08   02/16/16 20:11:04.864        Parameter 97(PK_Pipe): 0 <0xa1858b40>
08   02/16/16 20:11:04.864        Parameter 98(PK_Device_Pipes):  <0xa1858b40>
05   02/16/16 20:11:04.864      The target device 19 (routed to 19) has not registered. <0xb60b1b40>
08   02/16/16 20:11:04.865      Received Message from 10 (Media Plug-in / TV-Set) to 20 (OnScreen Orbiter / TV-Set), type 1 id 242 Command:Set Now Playing, retry none, parameters: <0xa1858b40>
08   02/16/16 20:11:04.865        Parameter 3(PK_DesignObj):  <0xa1858b40>
08   02/16/16 20:11:04.865        Parameter 5(Value To Assign):  <0xa1858b40>
08   02/16/16 20:11:04.865        Parameter 9(Text):  <0xa1858b40>
08   02/16/16 20:11:04.865        Parameter 29(PK_MediaType): 0 <0xa1858b40>
08   02/16/16 20:11:04.865        Parameter 41(StreamID): 0 <0xa1858b40>
08   02/16/16 20:11:04.865        Parameter 48(Value): 0 <0xa1858b40>
08   02/16/16 20:11:04.865        Parameter 50(Name):  <0xa1858b40>
08   02/16/16 20:11:04.865        Parameter 103(List PK Device):  <0xa1858b40>
08   02/16/16 20:11:04.865        Parameter 120(Retransmit): 1 <0xa1858b40>
08   02/16/16 20:11:04.915      Received Message from 20 (OnScreen Orbiter / TV-Set) to 10 (Media Plug-in / TV-Set), type 1 id 74 Command:Bind to Media Remote, retry none, parameters: <0x777ecb40>
08   02/16/16 20:11:04.915        Parameter 2(PK_Device):  <0x777ecb40>
08   02/16/16 20:11:04.915        Parameter 3(PK_DesignObj):  <0x777ecb40>
08   02/16/16 20:11:04.915        Parameter 8(On/Off): 0 <0x777ecb40>
08   02/16/16 20:11:04.915        Parameter 25(PK_Text):  <0x777ecb40>
08   02/16/16 20:11:04.915        Parameter 39(Options):  <0x777ecb40>
08   02/16/16 20:11:04.915        Parameter 45(PK_EntertainArea): 1 <0x777ecb40>
08   02/16/16 20:11:04.915        Parameter 63(PK_Text_Synopsis):  <0x777ecb40>
08   02/16/16 20:11:04.915        Parameter 159(PK_Screen):  <0x777ecb40>
05   02/16/16 20:11:05.036      Connect() failed, Error Code 111 (Connection refused)) <0x9483eb40>
08   02/16/16 20:11:05.132      Received Message from 20 (OnScreen Orbiter / TV-Set) to 24 (Photo Screen Saver / TV-Set), type 1 id 192 Command:On, retry none, parameters: <0x777ecb40>
08   02/16/16 20:11:05.132        Parameter 97(PK_Pipe): 0 <0x777ecb40>
08   02/16/16 20:11:05.132        Parameter 98(PK_Device_Pipes):  <0x777ecb40>
05   02/16/16 20:11:06.037      Connect() failed, Error Code 111 (Connection refused)) <0x9483eb40>
05   02/16/16 20:11:06.037      ClientSocket::Connect() not successful <0x9483eb40>
05   02/16/16 20:11:06.037      void ClientSocket::Disconnect() on this socket: 0xa3611e8 (m_Socket: 79) <0x9483eb40>
01   02/16/16 20:11:06.037      MythBackEnd_Socket::Close <0x9483eb40>
01   02/16/16 20:11:06.037      MythBackEnd_Socket::Connect failed m_bConnected=false <0x9483eb40>
05   02/16/16 20:11:07.039      Connect() failed, Error Code 111 (Connection refused)) <0x9483eb40>
05   02/16/16 20:11:08.040      Connect() failed, Error Code 111 (Connection refused)) <0x9483eb40>
01   02/16/16 20:11:08.040      TTTT UpdateAttributeCache begin <0x9e051b40>
01   02/16/16 20:11:08.195      TTTT UpdateAttributeCache end <0x9e051b40>
05   02/16/16 20:11:09.041      Connect() failed, Error Code 111 (Connection refused)) <0x9483eb40>
05   02/16/16 20:11:09.041      ClientSocket::Connect() not successful <0x9483eb40>
05   02/16/16 20:11:09.041      void ClientSocket::Disconnect() on this socket: 0xa148758 (m_Socket: 79) <0x9483eb40>
01   02/16/16 20:11:09.041      MythBackEnd_Socket::Close <0x9483eb40>
01   02/16/16 20:11:09.041      MythBackEnd_Socket::Connect failed m_bConnected=false <0x9483eb40>
01   02/16/16 20:11:09.042      MythBackEnd_Socket::SendMythString failed to reconnect <0x9483eb40>
01   02/16/16 20:11:09.042      MythTV_PlugIn::UpdateUpcomingRecordings no recordings <0x9483eb40>
08   02/16/16 20:11:09.072      Received Message from 48 (OnScreen Orbiter / Beamer) to 52 (Photo Screen Saver / Beamer), type 1 id 192 Command:On, retry none, parameters: <0x6c7d6b40>
08   02/16/16 20:11:09.072        Parameter 97(PK_Pipe): 0 <0x6c7d6b40>
08   02/16/16 20:11:09.072        Parameter 98(PK_Device_Pipes):  <0x6c7d6b40>
05   02/16/16 20:11:10.092      MythTV_PlugIn::CheckForNewRecordings couldn't locate file 1.82 TB (sdc3) ST2000DL004_HD2 [39] <0x9403db40>
05   02/16/16 20:11:10.092      MythTV_PlugIn::CheckForNewRecordings couldn't locate file 1.82 TB (sdb1) SAMSUNG_HD204UI [38] <0x9403db40>
05   02/16/16 20:11:10.092      MythTV_PlugIn::CheckForNewRecordings couldn't locate file 1.82 TB (sdc3) ST2000DL004_HD2 [39] <0x9403db40>
05   02/16/16 20:11:10.092      MythTV_PlugIn::CheckForNewRecordings couldn't locate file 1.82 TB (sdb1) SAMSUNG_HD204UI [38] <0x9403db40>
05   02/16/16 20:11:10.093      MythTV_PlugIn::CheckForNewRecordings couldn't locate file 1.82 TB (sdb1) SAMSUNG_HD204UI [36] <0x9403db40>
05   02/16/16 20:11:10.093      MythTV_PlugIn::CheckForNewRecordings couldn't locate file 1.82 TB (sdc3) ST2000DL004_HD2 [39] <0x9403db40>
05   02/16/16 20:11:10.093      MythTV_PlugIn::CheckForNewRecordings couldn't locate file 1.82 TB (sdb1) SAMSUNG_HD204UI [38] <0x9403db40>
05   02/16/16 20:11:10.094      MythTV_PlugIn::CheckForNewRecordings couldn't locate file Windows Share-Public [31] <0x9403db40>
08   02/16/16 20:11:25.002      Received Message from 28 (MythTV Plug-In / TV-Set) to 15 (App Server / TV-Set), type 1 id 67 Command:Spawn Application, retry none, parameters: <0x95840b40>
08   02/16/16 20:11:25.002        Parameter 13(Filename): /usr/pluto/bin/MythTvSyncDB.sh <0x95840b40>
08   02/16/16 20:11:25.002        Parameter 50(Name): mythtv_sync_db_master <0x95840b40>
08   02/16/16 20:11:25.002        Parameter 51(Arguments): master 192.168.80.1 <0x95840b40>
08   02/16/16 20:11:25.002        Parameter 94(SendOnFailure):  <0x95840b40>
08   02/16/16 20:11:25.002        Parameter 95(SendOnSuccess):  <0x95840b40>
08   02/16/16 20:11:25.002        Parameter 115(Show logo): 0 <0x95840b40>
08   02/16/16 20:11:25.002        Parameter 120(Retransmit): 0 <0x95840b40>
08   02/16/16 20:11:25.002        Parameter 126(Exclusive): 0 <0x95840b40>
08   02/16/16 20:11:25.002        Parameter 241(Detach): 0 <0x95840b40>

This is what happens, when the MD gets started. I can't say if I posted too much crap and not enough info, so if you need something else that would be helpful, let me know
Logged

maverick0815

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 858
    • View Profile
Re: performance takes a hit when starting md
« Reply #3 on: February 18, 2016, 05:27:44 pm »
hmm...right now mythtv doesn't seem to work at all, or lets say only sporadically. I'm out of my depth. Anyone has an idea, what I could do, where I should check?
right now nothing is working. I got internet access, but that's it. I cannot access dcerouter, no webadmin, no ssh. all I did was starting mythtv.
« Last Edit: February 18, 2016, 05:31:21 pm by maverick0815 »
Logged

maverick0815

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 858
    • View Profile
Re: performance takes a hit when starting md
« Reply #4 on: February 18, 2016, 05:49:07 pm »
So I am thinking now. Should I switch over to VDR? What do you guys think. If so, do I have to reinstall everything, or can I just make a switch on the existing system?
Logged

phenigma

  • LinuxMCE God
  • ****
  • Posts: 1758
    • View Profile
Re: performance takes a hit when starting md
« Reply #5 on: February 18, 2016, 08:07:12 pm »
Quote from: maverick0815 on February 18, 2016, 05:27:44 pm
I cannot access dcerouter, no webadmin, no ssh. all I did was starting mythtv.

That sounds like the system is very, very broken on your install now.

J.
Logged

maverick0815

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 858
    • View Profile
Re: performance takes a hit when starting md
« Reply #6 on: February 18, 2016, 08:18:29 pm »
This is more or less always happening, when I try to start mythtv. When I start it, it will run and display live tv for maybe up to one minute, then it crashes. I get all sorts of messages from mythtv..the good old "all tuners are buys" - even though I put the proper order setting. Mythcontext is complaining, that the backend has died...and so on and so forth. I try two or three times more...and a total system hangup occurs..or at least everything starts taking long enough to produce timeouts.
I think currently mythtv is not usable. Maybe I should give vdr a try again. The last time I tried that was with 7.10, so I guess there has been quite some progress. Perhaps I could even use qorbiter to control my tv with that?
Logged

phenigma

  • LinuxMCE God
  • ****
  • Posts: 1758
    • View Profile
Re: performance takes a hit when starting md
« Reply #7 on: February 19, 2016, 01:20:50 am »
The long and short is still this: None of the DEVs are using mythtv.  If you want mythtv to work properly someone (you, or others) will have to submit the required patches.  I tried to help and was effectively told off by a user.  Since that point I am loathe to touch mythtv for anyone.

We welcome patches on gitlab.

J.
Logged

maverick0815

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 858
    • View Profile
Re: performance takes a hit when starting md
« Reply #8 on: February 19, 2016, 09:10:10 am »
I'm sorry to hear, that you had to encounter an i***d user. your help has always been very welcome with me.
Anyways, its not the first time I hear, that none of the developers are using mythtv. However, that does beg the question, why having it included at all. Is there going to be a move to drop it entirely? I will try out vdr right now...I'm guessing some of the developers use that to watch TV...if so, then there must be a good reason for it.
Logged

Marie.O

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3676
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: performance takes a hit when starting md
« Reply #9 on: February 19, 2016, 11:12:54 am »
MythTV was very tightly integrated into LinuxMCE. However, with changes of MythTV outside of our reach, and the move of a lot of users in the US away from broadcasted TV to Netflix and stuff, people/devs moved away from MythTV. In Europe, VDR was always a good contender, but never was, nor is, as tightly integrated into LinuxMCE.

*I* am using VDR on a daily base, and if it doesn't work, SWMBO is _very_ upset, so I try to keep it going :) - One thing about VDR that can cause issues for people with limited resources is, that it never was designed in a client/server fashion, it is not very nice in disconnecting from tuners. I run a 4x DVB-S2 system, have a core and a single used MD and things are good, but even I do sometimes have an issue of not being able to switch to a channel due to ongoing recordings. Yes, I do record too much :*)
Logged

maverick0815

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 858
    • View Profile
Re: performance takes a hit when starting md
« Reply #10 on: February 19, 2016, 12:01:17 pm »
Good to know.
I did a clean install and want to give vdr a try. Now I checked in the wiki how to set it up. It mentions there, that in webadmin->advanced>configuration->VDR-Setup, i could do that- set up VDR. However  it says there I should use commandline to configure it...is that correct?
I also saw on the screen, repeatedly: failed to get Pluto VDR.
Logged

Marie.O

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3676
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: performance takes a hit when starting md
« Reply #11 on: February 19, 2016, 02:04:31 pm »
Please start a new thread for a new topic.
Logged
Pages: [1]
« previous next »
 

Sitemap