Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - bemficag

Pages: [1] 2 3
1
Installation issues / Re: mythtv problem
« on: January 30, 2011, 11:29:59 pm »
some help?

2
Installation issues / Re: mythtv problem
« on: January 29, 2011, 06:04:32 am »
one more thing! i still need a help about how to format my HDs to use on raid.
thanks

3
Installation issues / Re: mythtv problem
« on: January 29, 2011, 06:01:40 am »
Dear I3mce
I did what you had suggested and no lucky. I deselect it in a/v devices (but the the "vip211k" device still there), in the Inputs I have:
* S-video port / wintv pvr-150 / core
* Antenna port / wintv pvr-150 / core
* Composite port / vip211k / usb uirt embedded transmit
* composite port / wintv pvr-150 / core

any of theses are selected.

Providers:
Appear the option: * Antenna port / wintv pvr-150 / core. And if I select this option, then in another window it ask me to register at http://schedulesdirect.org and create one lineups for my tv provider (do i need to be registered?)
so, such i have an account there I entered with my username and password, and it says:
"There was an error retrieving provider information. Confirm your locaiton is set correctly. Check the network connection. You will be given the opportunity to try again when you reload the router. You can also specify this using the LInuxmce Admin Web Page."

So, I went to Computing Mythtv setup:
2. capture
       [mpeg:/dev/video0]
                 card type: ivtv mpeg-2 encorder car
                 video device: /dev/video0
                 default input: tuner1
3. video sources
       LMCE-Default
                 video source name: lmce-default
                 listing grabber: north america (schedulesdirect.org)(interna)
                 channel frequency table: us-bcast
4. input connections
 (in this step I have 5 option:
                                            tuner1->none
                                            s-video1->none
                                            composite1->none
                                            s-video2->none
                                            composite2->none

****

so, i dont know if i did something wrong or my system need some help.

please, any advice?

P.S. I'm using the composite port from my pvr-150 to receive the signal from dishnetwork box.

4
Installation issues / mythtv problem
« on: January 25, 2011, 05:37:33 am »
Hi guys,

Core/hybrid:
 
• MB: TF7050-M2
Socket AM2, Micro ATX
Supports AMD Athlon 64 X2/64/FX/Sempron Processors
Support AMD HyperTransport up to 2G
Supports AMD Cool'nQuiet Technology
Fully support HDMI function under Windows Vista
OS Support:Win2000 / WinXP / WinXP 64 / Vista / Vista 64
 
• Chipset:
nVIDIA GeForce7050PV + nForce630a(MCP68PV)


• PVR: WinTV -PVR 150

• Dishnetwork provider (VIP722K DVR)

Here's the situation:

At the first time when I was on the Wizard step (A/V devices), I installed the Satellite Boxes, Dishnetwork, VIP211K template, then on the question:
                  "Below are the a/v inputs this device has. Select one to specify if you connected a surveillance camera to it, or one of the a/v devices you just added."

I choose: Composite Port / wintv-pvr-150/ core. Then I selected  the VIP211K/USB UIRT EMBEDDED TRANSMIT/USB UIRT 0038/THE CORE/HYBRID/CORE. then, I choose LIVING ROOM/FAMILY ROOM for use only the room it's located in.

On the step: Below are the devices on this media director which are capable of receiving broadcast media, and for which you should specify the provider. Choose a device to specify the provider. When you are done with all devices select 'Done' to continue.

In this situation I clicked in Done.

After that, it is possible to watch tv, but only the current channel, I can not change channels or record nothing.
P.S. I only can watch tv if I click on Media, LiveTV VIP211K (dashboard), but if I click in "TV", appear the following message:
"Error: MythTV is using all inputs, but there are no active recordings?

Second situation:
If I do again the Wizard, and this time I select the LiveTVVIP211k as device to receive the broadband, then the follow windows appear to type the username and the password for the schedules direct (my account on the schedules direct has been expired). Then the next windows says:
   "There was an error retrieving provider information. Confirm your location is set correctly. Check the network connection. You will be given the opportunity to try again when you reload the router. You can also specify this using the LinuxMCE Admin Web Page."

In this second situation appear again the msg: "Error: MythTV is using all inputs, but there are no active recordings?

So, someone knows whats the point of this issue?

Also, I have a question about Raid. I have 4 HD of 1T each, and when I set the raid only 8XX GB is available, so I'd like to know if I can use the full space (1T)?

Thanks

P.S. I'm trying to add my remote control (gyration) on the webadmin, but has 4 option:
     **DEPRECATED** Gyration GY3101
     GO Cordless GC1005M
     MCR Remote
     MCR Remote Dongle.

Which one is the correct?

Gera


5
Users / Re: Raid help
« on: December 23, 2009, 04:16:27 am »
Thanks tempx... I'll try to do what you said.

Happy holidays

Bemfica

6
Users / Re: Raid help
« on: December 20, 2009, 06:40:41 pm »
Hi everybody,

So, I still needing your help, please!

Thanks

7
Users / Raid help
« on: December 19, 2009, 06:27:29 am »
Hey Guys,

I have two question about Raid. First of all, I just bought fours Seagate Barracuda (ST310005N1A1AS-RK) 1TB each, to be used on Raid 5. So, I've tried to format them but I cannot get the 100% of the size. I mean I only can get something like 970 GB.
So, someone knows how to solve this problem?

Second, I had used the Linuxmce 0710 for a long time wih raid 5, and I had tons of movies, musics, and pictures. So, I don't know why, but I decided to upgrade the version to 0810. Then, I did the upgrade, and after the installation I set up the old Raid 5 on Pluto structure but I couldnt get my files back. I dont know if the files still there or they gone.

Somebody can help me about it??

Best regards

Bemfica

8
Users / Re: One question about storage!
« on: August 02, 2009, 12:04:24 am »
OK, after a hard research I found a cheaper solution (I think), and I'd like your opinion about it!
I have a core with 1 ide ata (system) and 4 sata (raid 5) slots that are already  full. So, what I thought was:
1) move my all data to usb device (1 tb usb hard drive);
2) substitute my 4 320gb hdd for 5 1tb hdd;
3) installation of PCI SATA Controller Card (http://www.newegg.com/Product/Product.aspx?Item=N82E16816150014), because I have only 4 on-board sata slot;
4) put back my data.

Any advice??

Thanks!

9
Users / Re: One question about storage!
« on: July 30, 2009, 02:09:01 am »
How safe freenas is? This is has redundancy?? can use different  size of hdd??

10
Users / Re: One question about storage!
« on: July 29, 2009, 05:43:45 am »
somebody else has another option???

11
Users / Re: One question about storage!
« on: July 28, 2009, 05:45:00 am »
thanks matt,

I'll check it out.

all best

12
Users / One question about storage!
« on: July 28, 2009, 03:45:05 am »
Hi everyone,
I need some help, in my core I've been using raid 4 (4 hdd of 320gb each) for store  my data. And those are almost full. So, to increase space can I substitute new hdds with more gigas in this raid?? Or somebody has another option of storage that has redundancy?

thanks all

13
Installation issues / Re: apt-get update problem`
« on: July 19, 2009, 05:30:59 am »
Hi Colinjones

Thank you very much, you saved!

14
Installation issues / Re: apt-get update problem`
« on: July 19, 2009, 02:07:25 am »
Here is more information about my case:

I'm using the ASU_P2-M2A690G (http://wiki.linuxmce.org/index.php/ASUS_P2-M2A690G) as a MD, and I'm trying to update it from my core using ssh. So, when i type apt-get update its show me that couldn't find the source.

thanks

15
Installation issues / Re: apt-get update problem`
« on: July 19, 2009, 01:57:12 am »
Hi Andrew
Can you please show me how to do the update (step by step) I not a expert in linux.

Thanks

Pages: [1] 2 3