Messages

I've just updated everything and after deleting MD from Core and setting it up again, the video is working. Previously both VGA1 and VGA2 displayed distorted picture on the TV, now thru VGA1 i get undistorted picture on the TV and trhu VGA2 distorted. Thanks.

sorry for delay, I was out of town. Nope, its only motherboard connected to the tv set in bios to use external display.

Here is the output

Code Select Expand


01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Radeon Xpress 1250 [1002:7942]
        Kernel driver in use: radeon
        Kernel modules: radeon
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5756ME Gigabit Ethernet PCI Express [14e4:1674]


One other MD with the same type of motherboard is using its own(Dell latitude XT) LCD screen and this one works great.

One of my MDs is a Dell Latitude XT connected to TV via VGA port. Picture is distorted and flickering. I've lerned that its caused by kernel https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/573290 so I tried instaling 2.6.34 kernel for ubuntu 10.04. It have fixed the problem but now lirc won't install

Code Select Expand


Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  lirc lirc-modules-source
Suggested packages:
  lirc-x kernel-source
The following NEW packages will be installed:
  lirc lirc-modules-source lirc-pluto pluto-lirc-wrapper
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
Need to get 0B/1,853kB of archives.
After this operation, 12.0MB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
  lirc lirc-modules-source lirc-pluto pluto-lirc-wrapper
Authentication warning overridden.
Preconfiguring packages ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously deselected package lirc.
(Reading database ... 141733 files and directories currently installed.)
Unpacking lirc (from .../lirc_0.8.6-0ubuntu4.2+lmce1_i386.deb) ...
Selecting previously deselected package lirc-modules-source.
Unpacking lirc-modules-source (from .../lirc-modules-source_0.8.6-0ubuntu4.2+lmce1_all.deb) ...
Selecting previously deselected package lirc-pluto.
Unpacking lirc-pluto (from .../lirc-pluto_0.1.1_all.deb) ...
Processing triggers for ureadahead ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up lirc (0.8.6-0ubuntu4.2+lmce1) ...
ls: cannot access /lib/modules/2.6.32-42-generic-pae/kernel/ubuntu/lirc/: No such file or directory
egrep: /proc/modules: No such file or directory
egrep: /proc/modules: No such file or directory

Setting up lirc-modules-source (0.8.6-0ubuntu4.2+lmce1) ...
Removing old lirc-0.8.6 DKMS files...
/usr/sbin/dkms: line 107: /dev/fd/62: No such file or directory
Loading new lirc-0.8.6 DKMS files...

Error! DKMS tree already contains: lirc-0.8.6
You cannot add the same module/version combo more than once.
dpkg: error processing lirc-modules-source (--configure):
subprocess installed post-installation script returned error exit status 3
dpkg: dependency problems prevent configuration of lirc-pluto:
lirc-pluto depends on lirc-modules-2.6.20-15-generic | lirc-modules-2.6.22-14-generic | lirc-modules-source; however:
  Package lirc-modules-2.6.20-15-generic is not installed.
  Package lirc-modules-2.6.22-14-generic is not installed.
  Package lirc-modules-source is not configured yet.
dpkg: error processing lirc-pluto (--configure):
dependency problems - leaving unconfigured
No apport report written because the error message indicates its a followup error from a previous failure.
Errors were encountered while processing:
lirc-modules-source
lirc-pluto
E: Sub-process /usr/bin/dpkg returned an error code (1)


I just have installed nightly insted of the market one and it is working.

Yes I've done everything.

Qorbiter on phone some times(5-10%) "works" but all popup menus are empty and buttons for selecting user and room are showing lorem ipsum.

I've got Samsung Galaxy S running JellyBean.

I can't make user name stick. I've just reinstalled 1004 from beta, recomended snapshot, latest snapshot and now I've done internet installation and on each user name is clear after reloading the router.

Not really a fature request, but I stumbled upon their demo and I think it might be usefull on a mobile orbiter.

http://youtu.be/PkehW3fkpLQ
http://www.indooratlas.com/technology.html

I just reinstalled 1004 from the same snapshot.... and internet is working.
ATI MD have distorted picture, looks similar to radio interferences but there is no such thing on 0810 so it's not hardware.
MythTV detects cards, find channels and play live tv.
Video and audio playback works.
Diskless MDs boot.

later this week I will check telephone and other MDs.

I've already reinstalled 0810 but will install 1004 on second disc tomorrow and post 70-persistent-net.rules.

Hardware works fine with 0810 installation and i double checked every piece of hardware while trying to setup 1004.

with checked "Enable OpenGL vertical sync for timing" live tv works but every time i reload router this option is getting unchecked again and problem reoccure.

Creating annd running network_reset.sh didn't help. There were no DHCPOFFERS for eth0 and dhcp server for eth1 is giving wrong IPs.

with LMCE-1004-20120519090525976.iso I had no dhcp server working for internal network and core was unable to get data from dhcp from my modem. With connection set up manually there was still no internet. Nic is MCP78s from Nvidia. Without network i wasn't able to check diskless MDs or MythTV so only other bug I've seen was error with displaying polish characters in GUI looked like wrong character encoding.