News:

Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - cjrmail2k

#1
Users / Re: HP T5545
July 06, 2011, 02:19:06 PM
THanks guys for all the advice. I have not had another bash at getting LMCE working in my house for a while as have been really busy at work but I will check in again when I get going. Possibly when 8.10 becomes more mainstream or, heaven forbid, 10.10 :P
#2
Users / HP T5545
June 29, 2011, 04:00:45 PM
Hi,

The company I am working for are going to be getting rid of a few HP T5545 thin clients, was wondering if anyone has had any luck getting these to work? they don't have HDMI but do have DVI so should connect to quite a few monitors/TV's

#3
Installation issues / Re: VDR Setup Issue
July 16, 2009, 08:04:28 PM
Hi Andrew,

Here is the output as requested, I had the machine powered off (and unplugged while at work).

[sudo] password for linuxmce:
Stopping LMCE-Linux Video Disk Recorder   -= LMCE VERSION 0710-7 =- : vdr.
linuxmce@dcerouter:~$ sudo scan -o vdr -p -u /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-CrystalPalace > channels.conf
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-CrystalPalace
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 505833333 0 3 9 1 0 0 0
>>> tune to: 505833:I999B8C34D999M16T2G32Y0:T:27500:
WARNING: >>> tuning failed!!!
>>> tune to: 505833:I999B8C34D999M16T2G32Y0:T:27500: (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
linuxmce@dcerouter:~$ sudo dmesg |grep DVB
[    8.288000] input: Afatech DVB-T 2 as /class/input/input2
[    8.288000] input: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2
[   52.544000] dvb-usb: found a 'KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)' in cold state, will try to load a firmware
[   52.720000] dvb-usb: found a 'KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)' in warm state.
[   52.720000] DVB: registering new adapter (KWorld PlusTV Dual DVB-T Stick (DVB-T 399U))
[   53.300000] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[   53.316000] DVB: registering new adapter (KWorld PlusTV Dual DVB-T Stick (DVB-T 399U))
[   54.032000] af9013: found a 'Afatech AF9013 DVB-T' in warm state.
[   54.048000] DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T)...
[   54.048000] input: IR-receiver inside an USB DVB receiver as /class/input/input5
[   54.048000] dvb-usb: KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) successfully initialized and connected.
linuxmce@dcerouter:~$     
#4
Installation issues / Re: VDR Setup Issue
July 15, 2009, 11:48:19 PM
Hi Andrew,

I tried again but unfortunately the same error. At first, I installed the firmware package that you attached (thru the GUI). That installed OK. Then I installed the v4l2-source package, at this point it said the following:

Quoteerror: conflicts with the installed package v4l2-modules-2.6.22-14-generic

so I uninstalled the package:

sudo apt-get remove v4l2-modules-2.6.22-14-generic

this was a success and I then ran the install again, it took about 5-7 minutes and eventually appeared to install correctly, here is the output of the install:

Quote
(Reading database ... 111228 files and directories currently installed.)
Unpacking dkms (from .../dkms_2.0.17.4-0ubuntu2_all.deb) ...
Setting up dkms (2.0.17.4-0ubuntu2) ...

Selecting previously deselected package v4l2-modules-source.
(Reading database ... 111265 files and directories currently installed.)
Unpacking v4l2-modules-source (from .../v4l2-modules-source_0+hg20090324-1_all.deb) ...
Setting up v4l2-modules-source (0+hg20090324-1) ...

Creating symlink /var/lib/dkms/v4l2-modules/hg20090324/source ->
                 /usr/src/v4l2-modules-hg20090324

DKMS: add Completed.

Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area....
make KERNELRELEASE=2.6.22-14-generic...
cleaning build area....

DKMS: build Completed.
Running module version sanity check.
Warning! Cannot do version sanity checking because multiple snd-bt87x.ko
modules were found in kernel 2.6.22-14-generic.
Warning! Cannot do version sanity checking because multiple snd-tea575x-tuner.ko
modules were found in kernel 2.6.22-14-generic.

radio-gemtek.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/radio/radio-gemtek.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

-------------------
I removed a chunk of this as the post was too long but I can mail it if required
-------------------
gspca_sq905.ko:
- Original module
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

s5h1411.ko:
- Original module
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

gspca_mr97310a.ko:
- Original module
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

tda9840.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tda9840.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

quickcam_messenger.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/usbvideo/quickcam_messenger.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

mt2266.ko:
- Original module
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

c-qcam.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/c-qcam.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

vicam.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/usbvideo/vicam.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

dvb-usb-dibusb-mb.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mb.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

saa717x.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/ubuntu/media/ivtv/i2c-drivers/saa717x.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

tuner.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tuner.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

videocodec.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/videocodec.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

wm8775.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/wm8775.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

dvb-usb-vp702x.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-vp702x.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

tua6100.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/dvb/frontends/tua6100.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

pms.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/pms.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

radio-si470x.ko:
- Original module
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

tea6420.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tea6420.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

l64781.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/dvb/frontends/l64781.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

dvb-usb-dib0700.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dib0700.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

cx22700.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/dvb/frontends/cx22700.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

s2255drv.ko:
- Original module
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

ir-common.ko:
- Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/common/ir-common.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
- Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

depmod......

DKMS: install Completed.

then I rebooted the core, note I already had the Kworld in the core when installing, then before reboot I plugged up the antenna cable. This is what followed.

linuxmce@dcerouter:~$ sudo /etc/init.d/vdr stop
[sudo] password for linuxmce:
Stopping LMCE-Linux Video Disk Recorder   -= LMCE VERSION 0710-7 =- : vdr.
linuxmce@dcerouter:~$ sudo scan -o vdr -p -u /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-CrystalPalace > channels.conf
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-CrystalPalace
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 505833333 0 3 9 1 0 0 0
>>> tune to: 505833:I999B8C34D999M16T2G32Y0:T:27500:
WARNING: >>> tuning failed!!!
>>> tune to: 505833:I999B8C34D999M16T2G32Y0:T:27500: (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
linuxmce@dcerouter:~$ lsmod | grep dvb
dvb_usb_af9015         27424  0
dvb_usb                23180  1 dvb_usb_af9015
dvb_core               90140  1 dvb_usb
i2c_core               26112  5 mxl5005s,af9013,dvb_usb_af9015,dvb_usb,nvidia
usbcore               138632  8 dvb_usb_af9015,dvb_usb,ftdi_sio,usbserial,usbhid,ohci_hcd,ehci_hcd
linuxmce@dcerouter:~$


Any further Ideas? Does it look as though I did everything right? I didnt run any uninstalls for firmware but not sure if I needed to?

Cheers
Sput
#5
Installation issues / Re: VDR Setup Issue
July 15, 2009, 06:16:11 PM
Sorry Andrew, bad bout of what I can only assume was food poisoning this weekend! I will try and install the latest debs that you sent tonight.
#6
Installation issues / Re: VDR Setup Issue
July 01, 2009, 03:44:29 PM
Ok mate, thank you anyway for sticking with me on this one, we are moving house at the end of the month and I will hopefully be able to get my hands on the beta by then. Cheers!
#7
Installation issues / Re: VDR Setup Issue
June 29, 2009, 02:58:10 PM
Hi Andrew,

Sorry to keep bothering you mate but I was wondering if you managed to reproduce the issue at home? Also the guys at linuxmce seem to be working quite hard on 8.10, I was wondering how long they estimate until its usable?

Cheers
Sput
#8
Installation issues / Re: VDR Setup Issue
June 13, 2009, 09:52:06 PM
no mate its the 32 bit, should I try the 64?
#9
Installation issues / Re: VDR Setup Issue
June 13, 2009, 05:50:54 PM
any futher hints mate?
#10
Installation issues / Re: VDR Setup Issue
May 26, 2009, 10:20:18 PM
Ok, I download the tarball from your link, open it with ark and extract the V4L2xxxxxxx.deb file into the default location (/home/linuxmce). Also ensure that 'open location' is ticked. Once it is extracted, I click on it, this launches the Package installer. I select reinstall package, enter the linuxmce password and it loads successfully. I then reboot and then sudo /etc/init.d/vdr stop and then run the scan command as in your post. Is there something else that I am missing?
#11
Installation issues / Re: VDR Setup Issue
May 26, 2009, 12:00:21 AM
Howdy Andrew,

Well oddly enough I plugged the K-World into my vista machine and it scanned and picked up all of the channels so at least I know that its working. Do you have any other suggestions. Maybe I should try and build from the CD's instead of the DVD's? Really stuck mate and really keen to get this box running...

Cheers
Sput
#12
Installation issues / Re: VDR Setup Issue
May 21, 2009, 11:18:56 PM
Hey mate, I have reinstalled the package, same problem.

I have attached my syslog file again...do you reckon the tuner could be faulty? Maybe I should plug it into my windows box just to double-check....anyway the wife is calling so I look forward to your response and will check back tomorrow!
#13
Installation issues / Re: VDR Setup Issue
May 20, 2009, 07:50:26 PM
here we go mate. there were 2 from todays startup had to compress one
#14
Installation issues / Re: VDR Setup Issue
May 19, 2009, 08:38:24 PM
Hey mate, here it is...not looking like yours...

linuxmce@dcerouter:~$ lsmod | grep dvb
dvb_usb_af9015         27552  8
dvb_usb                23564  1 dvb_usb_af9015
dvb_core               90524  1 dvb_usb
i2c_core               26112  5 mxl5005s,af9013,dvb_usb_af9015,dvb_usb,nvidia
usbcore               138632  8 dvb_usb_af9015,dvb_usb,ftdi_sio,usbserial,usbhid,ehci_hcd,ohci_hcd
#15
Installation issues / Re: VDR Setup Issue
May 18, 2009, 08:19:20 PM
Stag doo was good, feeling rather rough now though!!!

here is the output mate


acx                                 dvb-usb-vp702x-01.fw
aic94xx-seq.fw                      dvb-usb-vp7045-01.fw
atmel_at76c502_3com.bin             dvb-usb-wt220u-01.fw
atmel_at76c502_3com-wpa.bin         ipw2100-1.3.fw
atmel_at76c502.bin                  ipw2100-1.3-i.fw
atmel_at76c502d.bin                 ipw2100-1.3-p.fw
atmel_at76c502d-wpa.bin             ipw2200-bss.fw
atmel_at76c502e.bin                 ipw2200-ibss.fw
atmel_at76c502e-wpa.bin             ipw2200-sniffer.fw
atmel_at76c502-wpa.bin              ipw3945.ucode
atmel_at76c503-i3861.bin            isl3877
atmel_at76c503-i3863.bin            isl3886
atmel_at76c503-rfmd-0.90.2-140.bin  isl3887usb_bare
atmel_at76c503-rfmd-acc.bin         isl3890
atmel_at76c503-rfmd.bin             isl3890usb
atmel_at76c504_2958-wpa.bin         iwlwifi-3945-1.ucode
atmel_at76c504a_2958-wpa.bin        iwlwifi-3945.ucode
atmel_at76c504.bin                  iwlwifi-4965-1.ucode
atmel_at76c504c-wpa.bin             iwlwifi-4965.ucode
atmel_at76c505a-rfmd2958.bin        license-end-user.txt
atmel_at76c505-rfmd2958.bin         license-oemihvisv.txt
atmel_at76c505-rfmd.bin             ql2100_fw.bin
atmel_at76c506.bin                  ql2200_fw.bin
atmel_at76c506-wpa.bin              ql2300_fw.bin
dvb-fe-cx24116.fw                   ql2322_fw.bin
dvb-fe-or51132-qam.fw               ql2400_fw.bin
dvb-fe-or51132-vsb.fw               rt2561.bin
dvb-fe-or51211.fw                   rt2561s.bin
dvb-ttpci-01.fw                     rt2661.bin
dvb-usb-af9015.fw                   rt73.bin
dvb-usb-avertv-a800-02.fw           v4l-cx2341x-dec.fw
dvb-usb-dib0700-01.fw               v4l-cx2341x-enc.fw
dvb-usb-dib0700-1.20.fw             v4l-cx2341x-init.mpg
dvb-usb-dibusb-5.0.0.11.fw          v4l-cx25840.fw
dvb-usb-dibusb-6.0.0.8.fw           v4l-pvrusb2-24xxx-01.fw
dvb-usb-dtt200u-01.fw               v4l-pvrusb2-29xxx-01.fw
dvb-usb-umt-010-02.fw               zd1211
linuxmce@dcerouter:~$


I tried again and did not need to run the sudo su - , this is the output...still no joy...

linuxmce@dcerouter:~$ sudo /etc/init.d/vdr stop
[sudo] password for linuxmce:
Stopping LMCE-Linux Video Disk Recorder   -= LMCE VERSION 0710-7 =- : vdr.
linuxmce@dcerouter:~$ sudo scan -o vdr -p -u /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-CrystalPalace > channels.conf
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-CrystalPalace
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 505833333 0 3 9 1 0 0 0
>>> tune to: 505833:I999B8C34D999M16T2G32Y0:T:27500:
WARNING: >>> tuning failed!!!
>>> tune to: 505833:I999B8C34D999M16T2G32Y0:T:27500: (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
linuxmce@dcerouter:~$