Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - cjrmail2k

Pages: [1] 2 3
1
Users / Re: HP T5545
« on: July 06, 2011, 02:19:06 pm »
THanks guys for all the advice. I have not had another bash at getting LMCE working in my house for a while as have been really busy at work but I will check in again when I get going. Possibly when 8.10 becomes more mainstream or, heaven forbid, 10.10 :P

2
Users / HP T5545
« on: June 29, 2011, 04:00:45 pm »
Hi,

The company I am working for are going to be getting rid of a few HP T5545 thin clients, was wondering if anyone has had any luck getting these to work? they don't have HDMI but do have DVI so should connect to quite a few monitors/TV's


3
Installation issues / Re: VDR Setup Issue
« on: July 16, 2009, 08:04:28 pm »
Hi Andrew,

Here is the output as requested, I had the machine powered off (and unplugged while at work).

Code: [Select]
[sudo] password for linuxmce:
Stopping LMCE-Linux Video Disk Recorder   -= LMCE VERSION 0710-7 =- : vdr.
linuxmce@dcerouter:~$ sudo scan -o vdr -p -u /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-CrystalPalace > channels.conf
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-CrystalPalace
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 505833333 0 3 9 1 0 0 0
>>> tune to: 505833:I999B8C34D999M16T2G32Y0:T:27500:
WARNING: >>> tuning failed!!!
>>> tune to: 505833:I999B8C34D999M16T2G32Y0:T:27500: (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
linuxmce@dcerouter:~$ sudo dmesg |grep DVB
[    8.288000] input: Afatech DVB-T 2 as /class/input/input2
[    8.288000] input: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2
[   52.544000] dvb-usb: found a 'KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)' in cold state, will try to load a firmware
[   52.720000] dvb-usb: found a 'KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)' in warm state.
[   52.720000] DVB: registering new adapter (KWorld PlusTV Dual DVB-T Stick (DVB-T 399U))
[   53.300000] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[   53.316000] DVB: registering new adapter (KWorld PlusTV Dual DVB-T Stick (DVB-T 399U))
[   54.032000] af9013: found a 'Afatech AF9013 DVB-T' in warm state.
[   54.048000] DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T)...
[   54.048000] input: IR-receiver inside an USB DVB receiver as /class/input/input5
[   54.048000] dvb-usb: KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) successfully initialized and connected.
linuxmce@dcerouter:~$     

4
Installation issues / Re: VDR Setup Issue
« on: July 15, 2009, 11:48:19 pm »
Hi Andrew,

I tried again but unfortunately the same error. At first, I installed the firmware package that you attached (thru the GUI). That installed OK. Then I installed the v4l2-source package, at this point it said the following:

Quote
error: conflicts with the installed package v4l2-modules-2.6.22-14-generic

so I uninstalled the package:

Code: [Select]
sudo apt-get remove v4l2-modules-2.6.22-14-generic
this was a success and I then ran the install again, it took about 5-7 minutes and eventually appeared to install correctly, here is the output of the install:

Quote
(Reading database ... 111228 files and directories currently installed.)
Unpacking dkms (from .../dkms_2.0.17.4-0ubuntu2_all.deb) ...
Setting up dkms (2.0.17.4-0ubuntu2) ...

Selecting previously deselected package v4l2-modules-source.
(Reading database ... 111265 files and directories currently installed.)
Unpacking v4l2-modules-source (from .../v4l2-modules-source_0+hg20090324-1_all.deb) ...
Setting up v4l2-modules-source (0+hg20090324-1) ...

Creating symlink /var/lib/dkms/v4l2-modules/hg20090324/source ->
                 /usr/src/v4l2-modules-hg20090324

DKMS: add Completed.

Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area....
make KERNELRELEASE=2.6.22-14-generic...
cleaning build area....

DKMS: build Completed.
Running module version sanity check.
Warning! Cannot do version sanity checking because multiple snd-bt87x.ko
modules were found in kernel 2.6.22-14-generic.
Warning! Cannot do version sanity checking because multiple snd-tea575x-tuner.ko
modules were found in kernel 2.6.22-14-generic.

radio-gemtek.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/radio/radio-gemtek.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

-------------------
I removed a chunk of this as the post was too long but I can mail it if required
-------------------
gspca_sq905.ko:
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

s5h1411.ko:
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

gspca_mr97310a.ko:
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

tda9840.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tda9840.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

quickcam_messenger.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/usbvideo/quickcam_messenger.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

mt2266.ko:
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

c-qcam.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/c-qcam.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

vicam.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/usbvideo/vicam.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

dvb-usb-dibusb-mb.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mb.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

saa717x.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/ubuntu/media/ivtv/i2c-drivers/saa717x.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

tuner.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tuner.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

videocodec.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/videocodec.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

wm8775.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/wm8775.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

dvb-usb-vp702x.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-vp702x.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

tua6100.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/dvb/frontends/tua6100.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

pms.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/pms.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

radio-si470x.ko:
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

tea6420.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/video/tea6420.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

l64781.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/dvb/frontends/l64781.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

dvb-usb-dib0700.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dib0700.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

cx22700.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/dvb/frontends/cx22700.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

s2255drv.ko:
 - Original module
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

ir-common.ko:
 - Original module
   - Found /lib/modules/2.6.22-14-generic/kernel/drivers/media/common/ir-common.ko
   - Storing in /var/lib/dkms/v4l2-modules/original_module/2.6.22-14-generic/i686/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/2.6.22-14-generic/updates/dkms/

depmod......

DKMS: install Completed.

then I rebooted the core, note I already had the Kworld in the core when installing, then before reboot I plugged up the antenna cable. This is what followed.

Code: [Select]
linuxmce@dcerouter:~$ sudo /etc/init.d/vdr stop
[sudo] password for linuxmce:
Stopping LMCE-Linux Video Disk Recorder   -= LMCE VERSION 0710-7 =- : vdr.
linuxmce@dcerouter:~$ sudo scan -o vdr -p -u /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-CrystalPalace > channels.conf
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-CrystalPalace
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 505833333 0 3 9 1 0 0 0
>>> tune to: 505833:I999B8C34D999M16T2G32Y0:T:27500:
WARNING: >>> tuning failed!!!
>>> tune to: 505833:I999B8C34D999M16T2G32Y0:T:27500: (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
linuxmce@dcerouter:~$ lsmod | grep dvb
dvb_usb_af9015         27424  0
dvb_usb                23180  1 dvb_usb_af9015
dvb_core               90140  1 dvb_usb
i2c_core               26112  5 mxl5005s,af9013,dvb_usb_af9015,dvb_usb,nvidia
usbcore               138632  8 dvb_usb_af9015,dvb_usb,ftdi_sio,usbserial,usbhid,ohci_hcd,ehci_hcd
linuxmce@dcerouter:~$

Any further Ideas? Does it look as though I did everything right? I didnt run any uninstalls for firmware but not sure if I needed to?

Cheers
Sput

5
Installation issues / Re: VDR Setup Issue
« on: July 15, 2009, 06:16:11 pm »
Sorry Andrew, bad bout of what I can only assume was food poisoning this weekend! I will try and install the latest debs that you sent tonight.

6
Installation issues / Re: VDR Setup Issue
« on: July 01, 2009, 03:44:29 pm »
Ok mate, thank you anyway for sticking with me on this one, we are moving house at the end of the month and I will hopefully be able to get my hands on the beta by then. Cheers!

7
Installation issues / Re: VDR Setup Issue
« on: June 29, 2009, 02:58:10 pm »
Hi Andrew,

Sorry to keep bothering you mate but I was wondering if you managed to reproduce the issue at home? Also the guys at linuxmce seem to be working quite hard on 8.10, I was wondering how long they estimate until its usable?

Cheers
Sput

8
Installation issues / Re: VDR Setup Issue
« on: June 13, 2009, 09:52:06 pm »
no mate its the 32 bit, should I try the 64?

9
Installation issues / Re: VDR Setup Issue
« on: June 13, 2009, 05:50:54 pm »
any futher hints mate?

10
Installation issues / Re: VDR Setup Issue
« on: May 26, 2009, 10:20:18 pm »
Ok, I download the tarball from your link, open it with ark and extract the V4L2xxxxxxx.deb file into the default location (/home/linuxmce). Also ensure that 'open location' is ticked. Once it is extracted, I click on it, this launches the Package installer. I select reinstall package, enter the linuxmce password and it loads successfully. I then reboot and then
Code: [Select]
sudo /etc/init.d/vdr stop and then run the scan command as in your post. Is there something else that I am missing?

11
Installation issues / Re: VDR Setup Issue
« on: May 26, 2009, 12:00:21 am »
Howdy Andrew,

Well oddly enough I plugged the K-World into my vista machine and it scanned and picked up all of the channels so at least I know that its working. Do you have any other suggestions. Maybe I should try and build from the CD's instead of the DVD's? Really stuck mate and really keen to get this box running...

Cheers
Sput

12
Installation issues / Re: VDR Setup Issue
« on: May 21, 2009, 11:18:56 pm »
Hey mate, I have reinstalled the package, same problem.

I have attached my syslog file again...do you reckon the tuner could be faulty? Maybe I should plug it into my windows box just to double-check....anyway the wife is calling so I look forward to your response and will check back tomorrow!

13
Installation issues / Re: VDR Setup Issue
« on: May 20, 2009, 07:50:26 pm »
here we go mate. there were 2 from todays startup had to compress one

14
Installation issues / Re: VDR Setup Issue
« on: May 19, 2009, 08:38:24 pm »
Hey mate, here it is...not looking like yours...

Code: [Select]
linuxmce@dcerouter:~$ lsmod | grep dvb
dvb_usb_af9015         27552  8
dvb_usb                23564  1 dvb_usb_af9015
dvb_core               90524  1 dvb_usb
i2c_core               26112  5 mxl5005s,af9013,dvb_usb_af9015,dvb_usb,nvidia
usbcore               138632  8 dvb_usb_af9015,dvb_usb,ftdi_sio,usbserial,usbhid,ehci_hcd,ohci_hcd

15
Installation issues / Re: VDR Setup Issue
« on: May 18, 2009, 08:19:20 pm »
Stag doo was good, feeling rather rough now though!!!

here is the output mate

Code: [Select]
acx                                 dvb-usb-vp702x-01.fw
aic94xx-seq.fw                      dvb-usb-vp7045-01.fw
atmel_at76c502_3com.bin             dvb-usb-wt220u-01.fw
atmel_at76c502_3com-wpa.bin         ipw2100-1.3.fw
atmel_at76c502.bin                  ipw2100-1.3-i.fw
atmel_at76c502d.bin                 ipw2100-1.3-p.fw
atmel_at76c502d-wpa.bin             ipw2200-bss.fw
atmel_at76c502e.bin                 ipw2200-ibss.fw
atmel_at76c502e-wpa.bin             ipw2200-sniffer.fw
atmel_at76c502-wpa.bin              ipw3945.ucode
atmel_at76c503-i3861.bin            isl3877
atmel_at76c503-i3863.bin            isl3886
atmel_at76c503-rfmd-0.90.2-140.bin  isl3887usb_bare
atmel_at76c503-rfmd-acc.bin         isl3890
atmel_at76c503-rfmd.bin             isl3890usb
atmel_at76c504_2958-wpa.bin         iwlwifi-3945-1.ucode
atmel_at76c504a_2958-wpa.bin        iwlwifi-3945.ucode
atmel_at76c504.bin                  iwlwifi-4965-1.ucode
atmel_at76c504c-wpa.bin             iwlwifi-4965.ucode
atmel_at76c505a-rfmd2958.bin        license-end-user.txt
atmel_at76c505-rfmd2958.bin         license-oemihvisv.txt
atmel_at76c505-rfmd.bin             ql2100_fw.bin
atmel_at76c506.bin                  ql2200_fw.bin
atmel_at76c506-wpa.bin              ql2300_fw.bin
dvb-fe-cx24116.fw                   ql2322_fw.bin
dvb-fe-or51132-qam.fw               ql2400_fw.bin
dvb-fe-or51132-vsb.fw               rt2561.bin
dvb-fe-or51211.fw                   rt2561s.bin
dvb-ttpci-01.fw                     rt2661.bin
dvb-usb-af9015.fw                   rt73.bin
dvb-usb-avertv-a800-02.fw           v4l-cx2341x-dec.fw
dvb-usb-dib0700-01.fw               v4l-cx2341x-enc.fw
dvb-usb-dib0700-1.20.fw             v4l-cx2341x-init.mpg
dvb-usb-dibusb-5.0.0.11.fw          v4l-cx25840.fw
dvb-usb-dibusb-6.0.0.8.fw           v4l-pvrusb2-24xxx-01.fw
dvb-usb-dtt200u-01.fw               v4l-pvrusb2-29xxx-01.fw
dvb-usb-umt-010-02.fw               zd1211
linuxmce@dcerouter:~$

I tried again and did not need to run the sudo su - , this is the output...still no joy...

Code: [Select]
linuxmce@dcerouter:~$ sudo /etc/init.d/vdr stop
[sudo] password for linuxmce:
Stopping LMCE-Linux Video Disk Recorder   -= LMCE VERSION 0710-7 =- : vdr.
linuxmce@dcerouter:~$ sudo scan -o vdr -p -u /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-CrystalPalace > channels.conf
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-CrystalPalace
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 505833333 0 3 9 1 0 0 0
>>> tune to: 505833:I999B8C34D999M16T2G32Y0:T:27500:
WARNING: >>> tuning failed!!!
>>> tune to: 505833:I999B8C34D999M16T2G32Y0:T:27500: (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
linuxmce@dcerouter:~$

Pages: [1] 2 3