Messages

1

Installation issues / Re: Not able to switch back to LinuxMCE after been using KDE desktop!!

« on: May 25, 2010, 06:54:01 pm »

No. but you can send a message to the media director device (for the core/hybrid, this is 1):

/usr/pluto/bin/MessageSend localhost 0 X 1 912 119 "0"

replace X with the PK_Device # of the Media director.

-Thom

Now I feel dumb agian   Can I send message to the media director device, is this possible from the KDE desktop enviroment?

So if I have an Core/hybrid the message would look like this:

/usr/pluto/bin/MessageSend localhost 0 1 1 912 119 "0"

But how can I send this message, from the teriminal, if so witch command?

Thanks Thom for your answer. Sorry for my silver spoon needs

2

Installation issues / Re: Not able to switch back to LinuxMCE after been using KDE desktop!!

« on: May 24, 2010, 10:43:58 pm »

We need to add back an Activate Orbiter applet.

-Thom

Any key combination that will let me do that?

3

Installation issues / Re: Not able to switch back to LinuxMCE after been using KDE desktop!!

« on: May 24, 2010, 05:41:25 pm »

Tried the same thing, only in UI1. Then all is ok! No lock up...

Should I select GForce/TNT graphic card in the LinuxMCE Admin? Or should I leave it at default?

4

Users / Re: DVB Cards info needed for Templates

« on: May 24, 2010, 01:18:36 pm »

Info from; Hauppauge WinTV-Nova-T-500-HD Model 298, PCI (repacked; WinTV-Nova-TD-500) DVB-T Card. Ports:DVB-T Ant1 & Ant2/IR channel (ant 2 possibly  dummy, not cofirmed on this card however...)
Test platform: LinuxMCE 8.10 beta 2 SVN 22969. HW; Mobo: Gigabyte E7AUM-DS2H, Core2 Duo E8400.

Output from code; sudo lspci -vn:

Code: [Select]

00:00.0 0600: 10de:0a80 (rev b1)
        Flags: bus master, 66MHz, fast devsel, latency 0

00:00.1 0500: 10de:0a88 (rev b1)
        Flags: bus master, 66MHz, fast devsel, latency 0

00:03.0 0601: 10de:0aac (rev b2)
        Subsystem: 1458:5001    
        Flags: bus master, 66MHz, fast devsel, latency 0

00:03.1 0500: 10de:0aa4 (rev b1)
        Flags: 66MHz, fast devsel

00:03.2 0c05: 10de:0aa2 (rev b1)
        Subsystem: 1458:0aa2    
        Flags: 66MHz, fast devsel, IRQ 255
        I/O ports at c000 [size=64]      
        I/O ports at 1c00 [size=64]      
        I/O ports at 1c80 [size=64]      
        Capabilities: [44] Power Management version 2

00:03.3 0500: 10de:0a89 (rev b1)
        Flags: 66MHz, fast devsel

00:03.4 0500: 10de:0a98 (rev b1)
        Subsystem: 10de:cb79    
        Flags: 66MHz, fast devsel

00:03.5 0b40: 10de:0aa3 (rev b1)
        Subsystem: 10de:cb79    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at e5100000 (32-bit, non-prefetchable) [size=512K]
        Kernel driver in use: nvidia                            
        Kernel modules: nvidia                                  

00:04.0 0c03: 10de:0aa5 (rev b1) (prog-if 10)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at e518b000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: ohci_hcd                          
        Kernel modules: ohci-hcd                                

00:04.1 0c03: 10de:0aa6 (rev b1) (prog-if 20)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at e518c000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=00a0        
        Capabilities: [80] Power Management version 2          
        Kernel driver in use: ehci_hcd                          
        Kernel modules: ehci-hcd                                

00:06.0 0c03: 10de:0aa7 (rev b1) (prog-if 10)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
        Memory at e5189000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: ohci_hcd                          
        Kernel modules: ohci-hcd                                

00:06.1 0c03: 10de:0aa9 (rev b1) (prog-if 20)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
        Memory at e518a000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=00a0        
        Capabilities: [80] Power Management version 2          
        Kernel driver in use: ehci_hcd                          
        Kernel modules: ehci-hcd                                

00:08.0 0403: 10de:0ac0 (rev b1)
        Subsystem: 1458:a102    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at e5180000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: HDA Intel                        
        Kernel modules: snd-hda-intel                          

00:09.0 0604: 10de:0aab (rev b1) (prog-if 01)
        Flags: bus master, 66MHz, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 00008000-00008fff                        
        Memory behind bridge: e5000000-e50fffff                      
        Capabilities: [b8] Subsystem: 1458:026f                      

00:0a.0 0200: 10de:0ab0 (rev b1)
        Subsystem: 1458:e000    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 221
        Memory at e5186000 (32-bit, non-prefetchable) [size=4K]  
        I/O ports at c400 [size=8]                              
        Memory at e5187000 (32-bit, non-prefetchable) [size=256]
        Memory at e5188000 (32-bit, non-prefetchable) [size=16]  
        Capabilities: [44] Power Management version 2            
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/4 Enable+                                                                        
        Kernel driver in use: forcedeth                                        
        Kernel modules: forcedeth                                              

00:0b.0 0106: 10de:0ab8 (rev b1) (prog-if 01)
        Subsystem: 1458:b002                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 222
        I/O ports at 09f0 [size=8]                              
        I/O ports at 0bf0 [size=4]                              
        I/O ports at 0970 [size=8]                              
        I/O ports at 0b70 [size=4]                              
        I/O ports at d800 [size=16]                              
        Memory at e5184000 (32-bit, non-prefetchable) [size=8K]  
        Capabilities: [44] Power Management version 2            
        Capabilities: [8c] SATA HBA <?>                          
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+                                                                        
        Kernel driver in use: ahci                                              
        Kernel modules: ahci                                                    

00:10.0 0604: 10de:0aa0 (rev b1)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00009000-00009fff                        
        Memory behind bridge: e2000000-e3ffffff                    
        Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff
        Capabilities: [40] Subsystem: 10de:0000                            
        Capabilities: [48] Power Management version 2                      
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-                                                                        
        Kernel modules: shpchp                                                  

00:16.0 0604: 10de:0ac7 (rev b1)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000a000-0000bfff                        
        Memory behind bridge: e4000000-e4ffffff                    
        Capabilities: [40] Subsystem: 10de:0000                    
        Capabilities: [48] Power Management version 3              
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+                                                                        
        Capabilities: [80] Express Root Port (Slot+), MSI 00                    
        Kernel driver in use: pcieport-driver                                  
        Kernel modules: shpchp                                                  

01:05.0 0c03: 1106:3038 (rev 62)
        Subsystem: 1106:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 16
        I/O ports at 8000 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

01:05.2 0c03: 1106:3104 (rev 65) (prog-if 20)
        Subsystem: 1106:3104                
        Flags: bus master, medium devsel, latency 32, IRQ 18
        Memory at e5000000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2          
        Kernel driver in use: ehci_hcd                          
        Kernel modules: ehci-hcd                                

01:06.0 0c03: 1106:3038 (rev 61)
        Subsystem: 1106:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 17
        I/O ports at 8400 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

01:06.1 0c03: 1106:3038 (rev 61)
        Subsystem: 1106:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 18
        I/O ports at 8800 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

01:06.2 0c03: 1106:3104 (rev 63) (prog-if 20)
        Subsystem: 1106:3104
        Flags: bus master, medium devsel, latency 32, IRQ 19
        Memory at e5001000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

02:00.0 0300: 10de:086a (rev b1)
        Subsystem: 1458:d000
        Flags: bus master, fast devsel, latency 0, IRQ 20
        Memory at e2000000 (32-bit, non-prefetchable) [size=16M]
        Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Memory at d0000000 (64-bit, prefetchable) [size=32M]
        I/O ports at 9000 [size=128]
        [virtual] Expansion ROM at d2000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0Enable-
        Kernel driver in use: nvidia
        Kernel modules: nvidiafb, nvidia

03:00.0 0101: 197b:2368 (prog-if 85 [Master SecO PriO])
        Subsystem: 1458:b000
        Flags: bus master, fast devsel, latency 0, IRQ 16
        I/O ports at a000 [size=8]
        I/O ports at a400 [size=4]
        I/O ports at a800 [size=8]
        I/O ports at ac00 [size=4]
        I/O ports at b000 [size=16]
        Capabilities: [68] Power Management version 2
        Capabilities: [50] Express Legacy Endpoint, MSI 01
        Kernel driver in use: pata_jmicron
        Kernel modules: pata_jmicron

Due to a USB controller on this card(had to shortened down, due to character limitation on forum post):
Output from code:sudo lsusb -v (-vn did not work for me!)

Code: [Select]

Bus 005 Device 002: ID 2040:8400 Hauppauge
Device Descriptor:                        
  bLength                18                
  bDescriptorType         1                
  bcdUSB               2.00                
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0                            
  bDeviceProtocol         0                            
  bMaxPacketSize0        64                            
  idVendor           0x2040 Hauppauge                  
  idProduct          0x8400                            
  bcdDevice            1.00                            
  iManufacturer           1 Hauppauge                  
  iProduct                2 WinTV Nova-DT              
  iSerial                 3 4033671507                  
  bNumConfigurations      1                            
  Configuration Descriptor:                            
    bLength                 9                          
    bDescriptorType         2                          
    wTotalLength           46                          
    bNumInterfaces          1                          
    bConfigurationValue     1                          
    iConfiguration          0                          
    bmAttributes         0xa0                          
      (Bus Powered)                                    
      Remote Wakeup                                    
    MaxPower              500mA                        
    Interface Descriptor:                              
      bLength                 9                        
      bDescriptorType         4                        
      bInterfaceNumber        0                        
      bAlternateSetting       0                        
      bNumEndpoints           4                        
      bInterfaceClass       255 Vendor Specific Class  
      bInterfaceSubClass      0                        
      bInterfaceProtocol      0                        
      iInterface              0                        
      Endpoint Descriptor:                              
        bLength                 7                      
        bDescriptorType         5                      
        bEndpointAddress     0x01  EP 1 OUT            
        bmAttributes            2                      
          Transfer Type            Bulk                
          Synch Type               None                
          Usage Type               Data                
        wMaxPacketSize     0x0200  1x 512 bytes        
        bInterval               1                      
      Endpoint Descriptor:                              
        bLength                 7                      
        bDescriptorType         5                      
        bEndpointAddress     0x81  EP 1 IN              
        bmAttributes            2                      
          Transfer Type            Bulk                
          Synch Type               None                
          Usage Type               Data                
        wMaxPacketSize     0x0200  1x 512 bytes        
        bInterval               1                      
      Endpoint Descriptor:                              
        bLength                 7                      
        bDescriptorType         5                      
        bEndpointAddress     0x82  EP 2 IN              
        bmAttributes            2                      
          Transfer Type            Bulk                
          Synch Type               None                
          Usage Type               Data                
        wMaxPacketSize     0x0200  1x 512 bytes        
        bInterval               1                      
      Endpoint Descriptor:                              
        bLength                 7                      
        bDescriptorType         5                      
        bEndpointAddress     0x83  EP 3 IN              
        bmAttributes            2                      
          Transfer Type            Bulk                
          Synch Type               None                
          Usage Type               Data                
        wMaxPacketSize     0x0200  1x 512 bytes        
        bInterval               1                                                                

Output from code; sudo v4l2-ctl -n:

Code: [Select]

Failed to open /dev/video0: No such file or directory

No PnP!
This is a new card with original firmware. I have not tried to get TV receptions on this card, using VDR yet .

Mandigo: Let me know if you need the full post for the USB code!

5

Installation issues / Not able to switch back to LinuxMCE after been using KDE desktop!!

« on: May 24, 2010, 08:10:27 am »

Current install is LinuxMCE 8.10 beta 2 SVN 22969, UI2-3. HW; Mobo: Gigabyte E7AUM-DS2H, Core2 Duo E8400 (see sign for more HW info).

When using the desktop enviroment, I have been using the task window named "OrbiterGL" and this will take me back to LinuxMCE. But after working a while in the desktop, the orbiterGL becomes unresponsive. Now I only see the flickr picture shifting after selecting "PlutoGalleryViewer". Seems like the LinuxMCE menu system is whent to sleep....

Now I have to do a forced restart, to get it working again

6

Users / Re: DVB Cards info needed for Templates

« on: May 24, 2010, 07:41:27 am »

Here is my first bought capture card; Pinnacle PCTV-Sat DVB-S Card. Ports: DVB-S in-out loop/S-video in/SPDIF Coax.
Test platform LinuxMCE 8.10 beta 2 SVN 22969. HW; Mobo: Gigabyte E7AUM-DS2H, Core2 Duo E8400.

Output from code; sudo lspci -vn:

Code: [Select]

00:00.0 0600: 10de:0a80 (rev b1)
        Flags: bus master, 66MHz, fast devsel, latency 0

00:00.1 0500: 10de:0a88 (rev b1)
        Flags: bus master, 66MHz, fast devsel, latency 0

00:03.0 0601: 10de:0aac (rev b2)
        Subsystem: 1458:5001    
        Flags: bus master, 66MHz, fast devsel, latency 0

00:03.1 0500: 10de:0aa4 (rev b1)
        Flags: 66MHz, fast devsel

00:03.2 0c05: 10de:0aa2 (rev b1)
        Subsystem: 1458:0aa2    
        Flags: 66MHz, fast devsel, IRQ 255
        I/O ports at c000 [size=64]      
        I/O ports at 1c00 [size=64]      
        I/O ports at 1c80 [size=64]      
        Capabilities: [44] Power Management version 2

00:03.3 0500: 10de:0a89 (rev b1)
        Flags: 66MHz, fast devsel

00:03.4 0500: 10de:0a98 (rev b1)
        Subsystem: 10de:cb79    
        Flags: 66MHz, fast devsel

00:03.5 0b40: 10de:0aa3 (rev b1)
        Subsystem: 10de:cb79    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at d5200000 (32-bit, non-prefetchable) [size=512K]
        Kernel driver in use: nvidia                            
        Kernel modules: nvidia                                  

00:04.0 0c03: 10de:0aa5 (rev b1) (prog-if 10)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at d528a000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: ohci_hcd                          
        Kernel modules: ohci-hcd                                

00:04.1 0c03: 10de:0aa6 (rev b1) (prog-if 20)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at d528b000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=00a0        
        Capabilities: [80] Power Management version 2          
        Kernel driver in use: ehci_hcd                          
        Kernel modules: ehci-hcd                                

00:06.0 0c03: 10de:0aa7 (rev b1) (prog-if 10)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
        Memory at d528c000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: ohci_hcd                          
        Kernel modules: ohci-hcd                                

00:06.1 0c03: 10de:0aa9 (rev b1) (prog-if 20)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
        Memory at d5289000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=00a0        
        Capabilities: [80] Power Management version 2          
        Kernel driver in use: ehci_hcd                          
        Kernel modules: ehci-hcd                                

00:08.0 0403: 10de:0ac0 (rev b1)
        Subsystem: 1458:a102    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at d5280000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: HDA Intel                        
        Kernel modules: snd-hda-intel                          

00:09.0 0604: 10de:0aab (rev b1) (prog-if 01)
        Flags: bus master, 66MHz, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 00008000-00008fff                        
        Memory behind bridge: d5100000-d51fffff                      
        Prefetchable memory behind bridge: d5000000-d50fffff        
        Capabilities: [b8] Subsystem: 1458:026f                      

00:0a.0 0200: 10de:0ab0 (rev b1)
        Subsystem: 1458:e000    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 221
        Memory at d5286000 (32-bit, non-prefetchable) [size=4K]  
        I/O ports at c400 [size=8]                              
        Memory at d5287000 (32-bit, non-prefetchable) [size=256]
        Memory at d5288000 (32-bit, non-prefetchable) [size=16]  
        Capabilities: [44] Power Management version 2            
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/4 Enable+                                                                        
        Kernel driver in use: forcedeth                                        
        Kernel modules: forcedeth                                              

00:0b.0 0106: 10de:0ab8 (rev b1) (prog-if 01)
        Subsystem: 1458:b002                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 222
        I/O ports at 09f0 [size=8]                              
        I/O ports at 0bf0 [size=4]                              
        I/O ports at 0970 [size=8]                              
        I/O ports at 0b70 [size=4]                              
        I/O ports at d800 [size=16]                              
        Memory at d5284000 (32-bit, non-prefetchable) [size=8K]  
        Capabilities: [44] Power Management version 2            
        Capabilities: [8c] SATA HBA <?>                          
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+                                                                        
        Kernel driver in use: ahci                                              
        Kernel modules: ahci                                                    

00:10.0 0604: 10de:0aa0 (rev b1)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00009000-00009fff                        
        Memory behind bridge: d2000000-d3ffffff                    
        Prefetchable memory behind bridge: 00000000b0000000-00000000cfffffff
        Capabilities: [40] Subsystem: 10de:0000                            
        Capabilities: [48] Power Management version 2                      
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-                                                                        
        Kernel modules: shpchp                                                  

00:16.0 0604: 10de:0ac7 (rev b1)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000a000-0000bfff                        
        Memory behind bridge: d4000000-d4ffffff                    
        Capabilities: [40] Subsystem: 10de:0000                    
        Capabilities: [48] Power Management version 3              
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+                                                                        
        Capabilities: [80] Express Root Port (Slot+), MSI 00                    
        Kernel driver in use: pcieport-driver                                  
        Kernel modules: shpchp                                                  

01:05.0 0400: 109e:036e (rev 11)
        Subsystem: 11bd:001c    
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at d5000000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data <?>          
        Capabilities: [4c] Power Management version 2      
        Kernel modules: bttv                                

01:05.1 0480: 109e:0878 (rev 11)
        Subsystem: 11bd:001c    
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at d5001000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data <?>          
        Capabilities: [4c] Power Management version 2      
        Kernel modules: bt878                              

01:06.0 0c03: 1106:3038 (rev 61)
        Subsystem: 1106:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 17
        I/O ports at 8000 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

01:06.1 0c03: 1106:3038 (rev 61)
        Subsystem: 1106:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 18
        I/O ports at 8400 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

01:06.2 0c03: 1106:3104 (rev 63) (prog-if 20)
        Subsystem: 1106:3104
        Flags: bus master, medium devsel, latency 32, IRQ 19
        Memory at d5100000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

02:00.0 0300: 10de:086a (rev b1)
        Subsystem: 1458:d000
        Flags: bus master, fast devsel, latency 0, IRQ 20
        Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
        Memory at b0000000 (64-bit, prefetchable) [size=256M]
        Memory at c0000000 (64-bit, prefetchable) [size=32M]
        I/O ports at 9000 [size=128]
        [virtual] Expansion ROM at c2000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0Enable-
        Kernel driver in use: nvidia
        Kernel modules: nvidiafb, nvidia

03:00.0 0101: 197b:2368 (prog-if 85 [Master SecO PriO])
        Subsystem: 1458:b000
        Flags: bus master, fast devsel, latency 0, IRQ 16
        I/O ports at a000 [size=8]
        I/O ports at a400 [size=4]
        I/O ports at a800 [size=8]
        I/O ports at ac00 [size=4]
        I/O ports at b000 [size=16]
        Capabilities: [68] Power Management version 2
        Capabilities: [50] Express Legacy Endpoint, MSI 01
        Kernel driver in use: pata_jmicron
        Kernel modules: pata_jmicron

Output from code; sudo v4l2-ctl -n:

Code: [Select]

Failed to open /dev/video0: No such file or directory
This card is not auto detected by LinuxMCE. No picture or sound. Not tried any firmware updates. Just put it inn and execudet your codes..

If you need a picture of this card or anything else information, let me know


Hope this is of any help. (I am still waiting to se my first live TV experience on LinuxMCE )

7

Users / Re: DVB Cards info needed for Templates

« on: May 24, 2010, 12:05:31 am »

New test: my older Hauppauge WinTV-NEXUS-S DVB Card ver 2.2, PCI. Ports: DVB-S/S-video out/IR channel.
Test platform LinuxMCE 8.10 beta 2 SVN 22969. HW; Mobo: Gigabyte E7AUM-DS2H, Core2 Duo E8400.

Output from code; sudo lspci -vn:

Code: [Select]

00:00.0 0600: 10de:0a80 (rev b1)
        Flags: bus master, 66MHz, fast devsel, latency 0

00:00.1 0500: 10de:0a88 (rev b1)
        Flags: bus master, 66MHz, fast devsel, latency 0

00:03.0 0601: 10de:0aac (rev b2)
        Subsystem: 1458:5001    
        Flags: bus master, 66MHz, fast devsel, latency 0

00:03.1 0500: 10de:0aa4 (rev b1)
        Flags: 66MHz, fast devsel

00:03.2 0c05: 10de:0aa2 (rev b1)
        Subsystem: 1458:0aa2    
        Flags: 66MHz, fast devsel, IRQ 255
        I/O ports at c000 [size=64]      
        I/O ports at 1c00 [size=64]      
        I/O ports at 1c80 [size=64]      
        Capabilities: [44] Power Management version 2

00:03.3 0500: 10de:0a89 (rev b1)
        Flags: 66MHz, fast devsel

00:03.4 0500: 10de:0a98 (rev b1)
        Subsystem: 10de:cb79    
        Flags: 66MHz, fast devsel

00:03.5 0b40: 10de:0aa3 (rev b1)
        Subsystem: 10de:cb79    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at e5100000 (32-bit, non-prefetchable) [size=512K]
        Kernel driver in use: nvidia                            
        Kernel modules: nvidia                                  

00:04.0 0c03: 10de:0aa5 (rev b1) (prog-if 10)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at e518b000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: ohci_hcd                          
        Kernel modules: ohci-hcd                                

00:04.1 0c03: 10de:0aa6 (rev b1) (prog-if 20)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at e518c000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=00a0        
        Capabilities: [80] Power Management version 2          
        Kernel driver in use: ehci_hcd                          
        Kernel modules: ehci-hcd                                

00:06.0 0c03: 10de:0aa7 (rev b1) (prog-if 10)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
        Memory at e5189000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: ohci_hcd                          
        Kernel modules: ohci-hcd                                

00:06.1 0c03: 10de:0aa9 (rev b1) (prog-if 20)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
        Memory at e518a000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=00a0        
        Capabilities: [80] Power Management version 2          
        Kernel driver in use: ehci_hcd                          
        Kernel modules: ehci-hcd                                

00:08.0 0403: 10de:0ac0 (rev b1)
        Subsystem: 1458:a102    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at e5180000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: HDA Intel                        
        Kernel modules: snd-hda-intel                          

00:09.0 0604: 10de:0aab (rev b1) (prog-if 01)
        Flags: bus master, 66MHz, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 00008000-00008fff                        
        Memory behind bridge: e5000000-e50fffff                      
        Capabilities: [b8] Subsystem: 1458:026f                      

00:0a.0 0200: 10de:0ab0 (rev b1)
        Subsystem: 1458:e000    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 221
        Memory at e5186000 (32-bit, non-prefetchable) [size=4K]  
        I/O ports at c400 [size=8]                              
        Memory at e5187000 (32-bit, non-prefetchable) [size=256]
        Memory at e5188000 (32-bit, non-prefetchable) [size=16]  
        Capabilities: [44] Power Management version 2            
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/4 Enable+                                                                        
        Kernel driver in use: forcedeth                                        
        Kernel modules: forcedeth                                              

00:0b.0 0106: 10de:0ab8 (rev b1) (prog-if 01)
        Subsystem: 1458:b002                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 222
        I/O ports at 09f0 [size=8]                              
        I/O ports at 0bf0 [size=4]                              
        I/O ports at 0970 [size=8]                              
        I/O ports at 0b70 [size=4]                              
        I/O ports at d800 [size=16]                              
        Memory at e5184000 (32-bit, non-prefetchable) [size=8K]  
        Capabilities: [44] Power Management version 2            
        Capabilities: [8c] SATA HBA <?>                          
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+                                                                        
        Kernel driver in use: ahci                                              
        Kernel modules: ahci                                                    

00:10.0 0604: 10de:0aa0 (rev b1)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00009000-00009fff                        
        Memory behind bridge: e2000000-e3ffffff                    
        Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff
        Capabilities: [40] Subsystem: 10de:0000                            
        Capabilities: [48] Power Management version 2                      
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-                                                                        
        Kernel modules: shpchp                                                  

00:16.0 0604: 10de:0ac7 (rev b1)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000a000-0000bfff                        
        Memory behind bridge: e4000000-e4ffffff                    
        Capabilities: [40] Subsystem: 10de:0000                    
        Capabilities: [48] Power Management version 3              
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+                                                                        
        Capabilities: [80] Express Root Port (Slot+), MSI 00                    
        Kernel driver in use: pcieport-driver                                  
        Kernel modules: shpchp                                                  

01:05.0 0480: 1131:7146 (rev 01)
        Subsystem: 13c2:0003    
        Flags: medium devsel, IRQ 16
        Memory at e5000000 (32-bit, non-prefetchable) [size=512]
        Kernel modules: dvb-ttpci                              

01:06.0 0c03: 1106:3038 (rev 61)
        Subsystem: 1106:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 17
        I/O ports at 8000 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

01:06.1 0c03: 1106:3038 (rev 61)
        Subsystem: 1106:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 18
        I/O ports at 8400 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

01:06.2 0c03: 1106:3104 (rev 63) (prog-if 20)
        Subsystem: 1106:3104
        Flags: bus master, medium devsel, latency 32, IRQ 19
        Memory at e5001000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

02:00.0 0300: 10de:086a (rev b1)
        Subsystem: 1458:d000
        Flags: bus master, fast devsel, latency 0, IRQ 20
        Memory at e2000000 (32-bit, non-prefetchable) [size=16M]
        Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Memory at d0000000 (64-bit, prefetchable) [size=32M]
        I/O ports at 9000 [size=128]
        [virtual] Expansion ROM at d2000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0Enable-
        Kernel driver in use: nvidia
        Kernel modules: nvidiafb, nvidia

03:00.0 0101: 197b:2368 (prog-if 85 [Master SecO PriO])
        Subsystem: 1458:b000
        Flags: bus master, fast devsel, latency 0, IRQ 16
        I/O ports at a000 [size=8]
        I/O ports at a400 [size=4]
        I/O ports at a800 [size=8]
        I/O ports at ac00 [size=4]
        I/O ports at b000 [size=16]
        Capabilities: [68] Power Management version 2
        Capabilities: [50] Express Legacy Endpoint, MSI 01
        Kernel driver in use: pata_jmicron
        Kernel modules: pata_jmicron

Output from code; sudo v4l2-ctl -n:

Code: [Select]

Failed to open /dev/video0: No such file or directory

This error I can not help you with Mandigo, for the moment

No PnP, but if I select "WinTV-NEXUS-S" in the LinuxMCE Admin page under Media Directors "PVR Capture Card" for my Hybride setup. The Set up Wizard will detected the card after a reboot. (Update: I noticed that this will hapen if the card is removed from the computer also... )

TV picture not testet yet.

Think the card is using this firmware: dvb-ttpci-01.fw-2622. How can I chk this for sure?

8

Users / Re: DVB Cards info needed for Templates

« on: May 23, 2010, 10:25:29 pm »

Testet my new Hauppauge WinTV-HVR-4000-HD Model 364, PCI, AnalogTV-Radio/DVB-T-S-S2/Line In/IR remote control sensor input. Test platform LinuxMCE 8.10 beta 2 SVN 22969. HW; Mobo: Gigabyte E7AUM-DS2H, Core2 Duo E8400.

sudo lspci -vn give me:

Code: [Select]

00:00.0 0600: 10de:0a80 (rev b1)
        Flags: bus master, 66MHz, fast devsel, latency 0

00:00.1 0500: 10de:0a88 (rev b1)
        Flags: bus master, 66MHz, fast devsel, latency 0

00:03.0 0601: 10de:0aac (rev b2)
        Subsystem: 1458:5001    
        Flags: bus master, 66MHz, fast devsel, latency 0

00:03.1 0500: 10de:0aa4 (rev b1)
        Flags: 66MHz, fast devsel

00:03.2 0c05: 10de:0aa2 (rev b1)
        Subsystem: 1458:0aa2    
        Flags: 66MHz, fast devsel, IRQ 255
        I/O ports at c000 [size=64]      
        I/O ports at 1c00 [size=64]      
        I/O ports at 1c80 [size=64]      
        Capabilities: [44] Power Management version 2

00:03.3 0500: 10de:0a89 (rev b1)
        Flags: 66MHz, fast devsel

00:03.4 0500: 10de:0a98 (rev b1)
        Subsystem: 10de:cb79    
        Flags: 66MHz, fast devsel

00:03.5 0b40: 10de:0aa3 (rev b1)
        Subsystem: 10de:cb79    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at ea000000 (32-bit, non-prefetchable) [size=512K]
        Kernel driver in use: nvidia                            
        Kernel modules: nvidia                                  

00:04.0 0c03: 10de:0aa5 (rev b1) (prog-if 10)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
        Memory at ea08b000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: ohci_hcd                          
        Kernel modules: ohci-hcd                                

00:04.1 0c03: 10de:0aa6 (rev b1) (prog-if 20)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at ea08c000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=00a0        
        Capabilities: [80] Power Management version 2          
        Kernel driver in use: ehci_hcd                          
        Kernel modules: ehci-hcd                                

00:06.0 0c03: 10de:0aa7 (rev b1) (prog-if 10)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
        Memory at ea089000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: ohci_hcd                          
        Kernel modules: ohci-hcd                                

00:06.1 0c03: 10de:0aa9 (rev b1) (prog-if 20)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at ea08a000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=00a0        
        Capabilities: [80] Power Management version 2          
        Kernel driver in use: ehci_hcd                          
        Kernel modules: ehci-hcd                                

00:08.0 0403: 10de:0ac0 (rev b1)
        Subsystem: 1458:a102    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at ea080000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: HDA Intel                        
        Kernel modules: snd-hda-intel                          

00:09.0 0604: 10de:0aab (rev b1) (prog-if 01)
        Flags: bus master, 66MHz, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 00008000-00008fff                        
        Memory behind bridge: e4000000-e8ffffff                      
        Capabilities: [b8] Subsystem: 1458:026f                      

00:0a.0 0200: 10de:0ab0 (rev b1)
        Subsystem: 1458:e000    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 221
        Memory at ea086000 (32-bit, non-prefetchable) [size=4K]  
        I/O ports at c400 [size=8]                              
        Memory at ea087000 (32-bit, non-prefetchable) [size=256]
        Memory at ea088000 (32-bit, non-prefetchable) [size=16]  
        Capabilities: [44] Power Management version 2            
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/4 Enable+                                                                        
        Kernel driver in use: forcedeth                                        
        Kernel modules: forcedeth                                              

00:0b.0 0106: 10de:0ab8 (rev b1) (prog-if 01)
        Subsystem: 1458:b002                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 222
        I/O ports at 09f0 [size=8]                              
        I/O ports at 0bf0 [size=4]                              
        I/O ports at 0970 [size=8]                              
        I/O ports at 0b70 [size=4]                              
        I/O ports at d800 [size=16]                              
        Memory at ea084000 (32-bit, non-prefetchable) [size=8K]  
        Capabilities: [44] Power Management version 2            
        Capabilities: [8c] SATA HBA <?>                          
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+                                                                        
        Kernel driver in use: ahci                                              
        Kernel modules: ahci                                                    

00:10.0 0604: 10de:0aa0 (rev b1)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00009000-00009fff                        
        Memory behind bridge: e2000000-e3ffffff                    
        Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff
        Capabilities: [40] Subsystem: 10de:0000                            
        Capabilities: [48] Power Management version 2                      
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-                                                                        
        Kernel modules: shpchp                                                  

00:16.0 0604: 10de:0ac7 (rev b1)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000a000-0000bfff                        
        Memory behind bridge: e9000000-e9ffffff                    
        Capabilities: [40] Subsystem: 10de:0000                    
        Capabilities: [48] Power Management version 3              
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+                                                                        
        Capabilities: [80] Express Root Port (Slot+), MSI 00                    
        Kernel driver in use: pcieport-driver                                  
        Kernel modules: shpchp                                                  

01:05.0 0400: 14f1:8800 (rev 05)
        Subsystem: 0070:6902    
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data <?>              
        Capabilities: [4c] Power Management version 2          
        Kernel driver in use: cx8800                            
        Kernel modules: cx8800                                  

01:05.1 0480: 14f1:8801 (rev 05)
        Subsystem: 0070:6902    
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at e5000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2          
        Kernel modules: cx88-alsa                              

01:05.2 0480: 14f1:8802 (rev 05)
        Subsystem: 0070:6902    
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2          
        Kernel driver in use: cx88-mpeg driver manager          
        Kernel modules: cx8802                                  

01:05.4 0480: 14f1:8804 (rev 05)
        Subsystem: 0070:6902    
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at e7000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2          

01:06.0 0c03: 1106:3038 (rev 61)
        Subsystem: 1106:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 17
        I/O ports at 8000 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

01:06.1 0c03: 1106:3038 (rev 61)
        Subsystem: 1106:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 18
        I/O ports at 8400 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

01:06.2 0c03: 1106:3104 (rev 63) (prog-if 20)
        Subsystem: 1106:3104                
        Flags: bus master, medium devsel, latency 32, IRQ 19
        Memory at e8000000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2          
        Kernel driver in use: ehci_hcd                          
        Kernel modules: ehci-hcd                                

02:00.0 0300: 10de:086a (rev b1)
        Subsystem: 1458:d000    
        Flags: bus master, fast devsel, latency 0, IRQ 20
        Memory at e2000000 (32-bit, non-prefetchable) [size=16M]
        Memory at c0000000 (64-bit, prefetchable) [size=256M]  
        Memory at d0000000 (64-bit, prefetchable) [size=32M]    
        I/O ports at 9000 [size=128]                            
        [virtual] Expansion ROM at d2000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2            
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-                                                                        
        Kernel driver in use: nvidia                                            
        Kernel modules: nvidiafb, nvidia                                        

03:00.0 0101: 197b:2368 (prog-if 85 [Master SecO PriO])
        Subsystem: 1458:b000                          
        Flags: bus master, fast devsel, latency 0, IRQ 16
        I/O ports at a000 [size=8]                      
        I/O ports at a400 [size=4]                      
        I/O ports at a800 [size=8]                      
        I/O ports at ac00 [size=4]                      
        I/O ports at b000 [size=16]                      
        Capabilities: [68] Power Management version 2    
        Capabilities: [50] Express Legacy Endpoint, MSI 01
        Kernel driver in use: pata_jmicron                
        Kernel modules: pata_jmicron

sudo v4l2-ctl -n, gives me:

Code: [Select]

ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : Television
        Type    : 0x00000001
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x00000000007F7FF7 ( PAL NTSC SECAM )
        Status  : 0

        Input   : 1
        Name    : Composite1
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x00000000007F7FF7 ( PAL NTSC SECAM )
        Status  : 0

        Input   : 2
        Name    : S-Video
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x00000000007F7FF7 ( PAL NTSC SECAM )
        Status  : 0


LinuxMCE find my card PnP. Have not been able to scan for channels yet, due to the wiki guide here http://wiki.linuxmce.org/index.php/VDR for the VDR was not sucsessfull for DVB-T

Could not find a local transmitter for Norway Stavanger. I see in the scan examples that sweden, denmark, findland, uk, germany, australia, france etc is present, but none from Norway

Can I make my own list, if so, is there a How-to?

9

Users / Re: Hauppauge WinTV-HVR-4000HD and WinTV-NOVA-T-500-HD working in Linux?

« on: May 18, 2010, 11:32:46 pm »

Just found a post in the Hauppauge forum where Stephanie explaines that the different between HD and none HD, is the supply of CyberLink PowerCinema, with the M.264 decoder and sound codec AAC+. Included in the package. This post is however dated 15 July 2008, so maybe there is a newer version today

Still have no replay on my post at Hauppauge forum...


Mandigo:
Just ordered the mobo in quest for my core, a ASUS M3N78-VM. Maybe ready to test the card in the weekend, if my order comes clean thru...

I am also now making an new order for the Hauppauge WinTV-HVR4000-HD, in a different store
this time

Still not sure if I should return my twin aerial WinTV-Nova-TD-500, or not. I guess if it can be used with HD, as it also explaines in the manual, there is no need to get a version with the cyperlink software, as it is only usable in windows anyway. only reason must be if there is a newer card, or that the single aerial connector version works better in linux..

Any thoughts/speculation/facts on this to make up my mind, he-he

10

Users / Re: New hardware for dedicated core build

« on: May 18, 2010, 12:19:26 am »

Why PCIe? Just find an old PCI one (perfect job for eBay) - again you're at risk of making the core unnecessarily uncomplicated here, in that you may have problems detecting it, installing it, etc. Check the wiki for NICs that are known to work..... unless you've already done that and the Gbit CNet PCIe card you mention is fine, in which case I apologise in advance

As Andrew said, tried and tested hardware is the way forward, don't go for bleeding edge. Think space shuttle

Think I tried the CNet with test build(did not have a good caputre card then). PCIe NIC to save a PCI slot for capture card. But I have ordered a Intel PCI card: INTEL DESKTOP ADAPTER INTEL PRO 1000 GT BULK. Just in case.

So I guess my AMD setup is a good space shuttle then? Thinking of placeing the order in the following days

    * Mobo: Asus M3N78-VM
    * CPU: AMD Athlon II X2 240e
    * Ram: Kingston HyperX 2GB (2 x 1GB)
    * CPU Cooler: Zalman CPU-kjøler CNPS8700 NT

11

Users / Re: Hauppauge WinTV-HVR-4000HD and WinTV-NOVA-T-500-HD working in Linux?

« on: May 17, 2010, 09:28:35 pm »

I was just looking at the Hauppauge webpage, and the "TD" / "T" is just mixed together...

on the Scandinavian pages there are two models:
WinTV-Nova-TD-500 http://www.hauppauge.se/site/products/data_novat500.html
This card has two aerial connectors!!
WinTV-Nova-TD-500HD http://www.hauppauge.se/site/products/data_novat500hd.html
If you study the pictures for the HD version the "D" in "TD" is not there. But in the text it is.
The HD version has only one aerial connector! And the card layout looks quite different from the none HD version, its a complete new card in my eyes!!

Mine card however has two aerial, and looks like the none HD version labeled.

Same in the United Kingdom pages, the "T" in "TD" is missing, but only in the picture banner. And there is no HD etition at all here. But for Germany,France, Spain etc. Here they have only the WinTV-Nova-T-500. And nice, they have a double picture banner that shows both single aerial and a double.... http://www.hauppauge.fr/site/products/data_novat500.html

I think the pictures are wrong in those places, and that the text is most possible to be correct. That would make sence anyway...

i think Hauppage needs to spend some time kleening up their naming schema/pictures for the nova 500 series, this gives me a headacke


But regarding the "HD" label. I wonder if this label just shows that this is a retail product with the nessesary software codecs... From the Hauppage website on the HD version:

Included with the WinTV v7 HD application with H.264 dekoder and support for AAC sound. Suitable for Norwegian broadcast

I checked another webstore, and they show a picture of the card with one aerial connector and the HDTV Ready label. I think I have not received what I orderd in this case. Because as meantioned earlier I have two ariel conn. and no HD label either


I am posting a question on the Hauppauge forum, to see what they could come up with!

12

Users / Re: New hardware for dedicated core build

« on: May 17, 2010, 06:47:11 pm »

Have you got a second NIC sourced?

Yes planning to use a Gbit CNet PCIe card, that I already have. If that what you are refering to when you mean "sourced".

13

Users / Re: Hauppauge WinTV-HVR-4000HD and WinTV-NOVA-T-500-HD working in Linux?

« on: May 17, 2010, 06:40:35 pm »

Not sure what to make out of this labeling thing on this card I have received....

I ordered a WinTV-Nova-T-500-HD but seem to have received WinTV-Nova-TD-500. Since the printing on the card itself states WinTV-Nova-TD-500.

Is this a regular practice from Hauppauge, to not update their pagaging and labeling on new revisons of theyr products? or have the reseller made som adjustment to an older product?

I think I will contact the reseller about this, agree?

14

Users / Re: Hauppauge WinTV-HVR-4000HD and WinTV-NOVA-T-500-HD working in Linux?

« on: May 17, 2010, 06:28:32 pm »

FOR INFO ONLY: I can also see that there is a VIA ship on the card as well, so it is proberly not the DiBcom DiB0710 controller, as stated "Diversity" and not supported in this wiki here:
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#WinTV-NOVA-TD-500

15

Users / Re: Hauppauge WinTV-HVR-4000HD and WinTV-NOVA-T-500-HD working in Linux?

« on: May 17, 2010, 06:20:36 pm »

http://wiki.linuxmce.org/index.php/Capture_Cards
T-500 and HVR-4000 should both be PnP
The HVR-4400 you might need to supply Mandingo the stuff he needs (if he's still available that is).

Yes Schmich, both NOVA-T-500 and NOVA-DT-500 is listed, so maybe the problems is in the past then.

When I read from the box and manual with the NoVA-DT-500(actually there is a sticker on the box with the name: Hauppauge WinTV-Nova-T-500-HD, but the box, manual and PCI card states nova-TD-500..) it still talks about the "Diversity Technology" mode; one antenna shared for both tuners on Ant 1, or diversity mode with one antenna pr tuner Ant 1 and Ant 2 connected.