LinuxMCE Forums
General => Users => Topic started by: mathieu on July 06, 2010, 12:01:31 pm
-
Hi guys,
I have an older receiver which lacks hdmi inputs. To get sound from my MD (asus M3N78-EM) to the receiver I use toslink, for video I use a hdmi cable to the tv.
The problem is that when I choose to play an audio or video file there is no sound unless I switch to an other input on the receiver and then back the correct one. For the time of the song then there is audio. When the song ends audio drops...
When instead the media director boots off it's own HDD with ubuntu 10.04 none of the said issues occure.
This means A the receiver is OK
B the cable is OK
C toslink digital out of MD is OK
While using vga instead of hdmi everything is ok: the sound doesn't drop.
So I was thinking that in one way of the other, there is sound going through hdmi which is interfering with the toslink. Does anybod have a clue of what needs to be done? Perhaps a kernel update?
Any suggestions are as allways greatly appreciated :)
br mathieu
EDIT:Going the Stereo Ananlog route solved the problem.
Further research revealed that the NAD T763 receiver is picky in the Toslink signal it accepts.
-
I have a similar setup on my core (video via hdmi, audio via toslink to a denon amp) and it works fine. Off topic - I use the toslink to get surround sound as my hdmi only outputs stereo. I have the ABIT ANM2HD mainboard.
Did you use the av wizard to get your sound via the optical output? Have you changed any of the audio settings manually?
Reading your post again, it looks like the sound is there but you need to change inputs then change back to hear it. This sounds more like an issue with the receiver to me. If playing with the receiver (without changing anything else) fixes the problem then the signal must already be there.
Does the receiver have some sort of auto input switching mechanism?
Might be worth testing with a different receiver if that's possible.
Barney
-
Hi guys,
I have an older receiver which lacks hdmi inputs. To get sound from my MD (asus M3N78-EM) to the receiver I use toslink, for video I use a hdmi cable to the tv.
The problem is that when I choose to play an audio or video file there is no sound unless I switch to an other input on the receiver and then back the correct one. For the time of the song then there is audio. When the song ends audio drops...
When instead the media director boots off it's own HDD with ubuntu 10.04 none of the said issues occure.
This means A the receiver is OK
B the cable is OK
C toslink digital out of MD is OK
While using vga instead of hdmi everything is ok: the sound doesn't drop.
So I was thinking that in one way of the other, there is sound going through hdmi which is interfering with the toslink. Does anybod have a clue of what needs to be done? Perhaps a kernel update?
Any suggestions are as allways greatly appreciated :)
br mathieu
Hi,
Just re-run the AVwizard from the System menu of the MD you want to reconfigure and choose stereo audio.
All the best
Andrew
-
thanks for replying Andrew!
Found the solution. On my receiver I had put down all transfos not in use. Indeed I've only two speakers.
Putting all surround speakers back on did the trick.
Apperently there is bidirectional communication over the toslink. In that case the toslink/spdif device on my MD was receiving a message like: there are only two channels, use an other device, or not :D
br mathieu
-
Did speak to soon. Problem is not fixed by bringing up the surround speakers in the setup menu of the receiver. :'(
Hi Barney, I didn't see your post.
Plying sound with same receiver, same cable, same computer but other OS (ubuntu 10.04) does everything as expected . this indicates indeed some miss configuration.
I will try Andrew's advice again.
thanks
-
Hi Andrew,
I did the av-wizard again, but there is only an analog stereo option. Is that what you meant?
br mathieu
-
Hi Andrew,
I did the av-wizard again, but there is only an analog stereo option. Is that what you meant?
br mathieu
Yep it is
Andrew