« previous next »
Pages: [1]

Author Topic: Getting really tired by now  (Read 5106 times)

Thingie

  • Veteran
  • ***
  • Posts: 114
    • View Profile
Getting really tired by now
« on: February 03, 2010, 03:56:31 pm »
Ok her we go,

I use a NAS-server (FreeNas) to store all my media. On this server are 753 video files, 120 DVD's (ISO-files), and 14843 music files. Before I started using the 810 edition of LinuxMCE I used different releases of the 710 edition. There were never any big problems with using the large amount of files on the server. I had used 'Media Files Sync' for the files and added nice covers and attributes so they would display nice in the Orbiters and they did. Since I started using the 810 editions different problems occur. I've been using the 810 alpha and beta and both have the same problems. First I noticed the Orbiters where loading very slow when I pressed the 'Video-button'. I'm talking up to 10 seconds. This was surely not the case in 710. I didn't pay much attention to this hoping it would be solved in future releases. I added some more files to my server and used 'Media Files Sync' to add covers and attributes. After that when I push the 'Video-button' on an Orbiter nothing visual happens and that orbiter reloads itself after a few seconds. In short, I can't see any of my video any more. There are no problems with audio. About 2 weeks ago I had to do a clean install of my core (I messed it up while experimenting) so I decided to delete all the .ID3 files on my server. As I understand these are created and hold the info for the Core and I thought there maybe was a corrupted one there. I did the clean install and all the files where visible under the 'Video-button'. So I started to add all the covers and attributes again and everything looked good. I was very pleased. Until. I'm about half way adding covers and attributes (only talking about video) and the problem reappeared. Again i can't access my video files on any Orbiter. It takes 'forever' to add all the covers and attributes so I don't feel like deleting them again. I looked on the forum and found 1 previous post but nobody answered the guys question. Can somebody please help me out here because I'm getting really desperate. I recently bought my first Z-wave devices so I really would like to keep using LinuxMCE.

Orbiter.log

Code: [Select]
10 02/03/10 16:38:17.013 Device: 77 starting.  Connecting to: dcerouter
10 02/03/10 16:38:17.021 Stage connect
10 02/03/10 16:38:17.038 Orbiter 003F97D0 constructor
10 02/03/10 16:38:17.038 New orbiter created!
10 02/03/10 16:38:17.139 Connect OK
10 02/03/10 16:38:17.139 Orbiter SelfUpdate: starting
10 02/03/10 16:38:17.139 Requesthandler 003F97D0 (device: 77) runThread now running
10 02/03/10 16:38:17.152 Current checksum : dummy orbiter d41d8cd98f00b204e9800998ecf8427e
10 02/03/10 16:38:17.152 Update available on the server.
01 02/03/10 16:38:17.155 The UpdateBinary application 'UpdateBinary.exe' is missing on the server.
01 02/03/10 16:38:17.155 Unable to download UpdateBinary application from the server.
10 02/03/10 16:38:17.155 Stage run
10 02/03/10 16:38:17.258 Initialize Get_Orbiter_Status (1) -O-
01 02/03/10 16:38:17.258 Directory: C77/ doesn't contain the orbiter's .info file.  Requesting files from the server.
10 02/03/10 16:38:19.231 CMD_Goto_Screen message id 1 params: message 007AEB80
10 02/03/10 16:38:19.231 Param id:   159, value: 1
10 02/03/10 16:38:19.231 Param id:   195, value: 1
10 02/03/10 16:38:19.231 Param id:   251, value: 0
10 02/03/10 16:38:19.231 Param id:   252, value: 0
10 02/03/10 16:38:19.231 Param id:   253, value: 0
10 02/03/10 16:38:19.231 Orbiter::CMD_Goto_DesignObj: 1255.1.0 with cant go back 0
10 02/03/10 16:38:19.231 CMD_Bind_Icon 1255.0.0.1687.13 user 0 (size 0)
10 02/03/10 16:38:19.231 CMD_Bind_Icon 1255.0.0.2436.12 room 0 (size 0)
10 02/03/10 16:38:19.231 CMD_Bind_Icon 1255.0.0.3275.39 housemode0 1 (size 0)
10 02/03/10 16:38:19.231 CMD_Bind_Icon added 1255.0.0.3275.39 housemode0 1 (size 1)
10 02/03/10 16:38:19.231 CMD_Bind_Icon 1255.0.0.4781.36 user1 1 (size 1)
10 02/03/10 16:38:19.231 CMD_Bind_Icon added 1255.0.0.4781.36 user1 1 (size 2)
10 02/03/10 16:38:19.231 CMD_Bind_Icon 1255.0.0.5006.38 vm1 1 (size 2)
10 02/03/10 16:38:19.231 CMD_Bind_Icon added 1255.0.0.5006.38 vm1 1 (size 3)
10 02/03/10 16:38:19.231 CMD_Bind_Icon 1255.1.0.1687.13 user 0 (size 3)
10 02/03/10 16:38:19.231 CMD_Bind_Icon 1255.1.0.2436.12 room 0 (size 3)
10 02/03/10 16:38:19.231 CMD_Bind_Icon 1255.1.0.3275.43 housemode0 1 (size 3)
10 02/03/10 16:38:19.231 CMD_Bind_Icon added 1255.1.0.3275.43 housemode0 1 (size 3)
10 02/03/10 16:38:19.231 CMD_Bind_Icon 1255.1.0.4781.40 user1 1 (size 3)
10 02/03/10 16:38:19.231 CMD_Bind_Icon added 1255.1.0.4781.40 user1 1 (size 3)
10 02/03/10 16:38:19.231 CMD_Bind_Icon 1255.1.0.5006.42 vm1 1 (size 3)
10 02/03/10 16:38:19.231 CMD_Bind_Icon added 1255.1.0.5006.42 vm1 1 (size 3)
10 02/03/10 16:38:19.231 CMD_Bind_Icon 1272.0.0.3275.120 housemode0 1 (size 3)
10 02/03/10 16:38:19.231 CMD_Bind_Icon added 1272.0.0.3275.120 housemode0 1 (size 3)
10 02/03/10 16:38:19.231 CMD_Bind_Icon 1272.1.0.3275.124 housemode0 1 (size 3)
10 02/03/10 16:38:19.231 CMD_Bind_Icon added 1272.1.0.3275.124 housemode0 1 (size 3)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 1273.0.0.4781.138 user1 1 (size 3)
10 02/03/10 16:38:19.232 CMD_Bind_Icon added 1273.0.0.4781.138 user1 1 (size 3)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 1273.0.0.5006.140 vm1 1 (size 3)
10 02/03/10 16:38:19.232 CMD_Bind_Icon added 1273.0.0.5006.140 vm1 1 (size 3)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 1273.1.0.4781.153 user1 1 (size 3)
10 02/03/10 16:38:19.232 CMD_Bind_Icon added 1273.1.0.4781.153 user1 1 (size 3)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 1273.1.0.5006.155 vm1 1 (size 3)
10 02/03/10 16:38:19.232 CMD_Bind_Icon added 1273.1.0.5006.155 vm1 1 (size 3)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 1389.0.0.3401.356 monitormode 0 (size 3)
10 02/03/10 16:38:19.232 CMD_Bind_Icon added 1389.0.0.3401.356 monitormode 0 (size 4)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 1602.0.0.1687.392 user 0 (size 4)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 1688.0.0.1694.487 user_button 0 (size 4)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 1881.0.0.3305.536 follow_security 1 (size 4)
10 02/03/10 16:38:19.232 CMD_Bind_Icon added 1881.0.0.3305.536 follow_security 1 (size 5)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 2211.0.0.3302.896 follow_light 1 (size 5)
10 02/03/10 16:38:19.232 CMD_Bind_Icon added 2211.0.0.3302.896 follow_light 1 (size 6)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 2212.0.0.3303.926 follow_climate 1 (size 6)
10 02/03/10 16:38:19.232 CMD_Bind_Icon added 2212.0.0.3303.926 follow_climate 1 (size 7)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 2213.0.0.3304.934 follow_telecom 1 (size 7)
10 02/03/10 16:38:19.232 CMD_Bind_Icon added 2213.0.0.3304.934 follow_telecom 1 (size 8)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 2228.0.0.3296.955 follow_media 1 (size 8)
10 02/03/10 16:38:19.232 CMD_Bind_Icon added 2228.0.0.3296.955 follow_media 1 (size 9)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 2228.0.0.3417.957 media_private 1 (size 9)
10 02/03/10 16:38:19.232 CMD_Bind_Icon added 2228.0.0.3417.957 media_private 1 (size 10)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 2437.0.0.2439.1074 room_button 0 (size 10)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 2437.0.0.2439.1076 room_button 0 (size 10)
10 02/03/10 16:38:19.232 CMD_Bind_Icon 3332.0.0.2436.1157 room 0 (size 10)
10 02/03/10 16:38:19.233 CMD_Bind_Icon 5462.0.0.1687.4368 user 0 (size 10)
10 02/03/10 16:38:19.233 Orbiter::Initialize finished startup phase
10 02/03/10 16:38:19.233 Saving context for screen 1 / 05B739E8, object 1255.1.0 (71 variables, 45 visibility status) ...
10 02/03/10 16:38:19.237 OrbiterRenderer::RenderScreen Render screen: 1255.1.0
10 02/03/10 16:38:19.271 Orbiter::RenderObject obj 1255.1.0.1687.13 bound to user 1, got ptr 04943324
05 02/03/10 16:38:19.323 End paint...
05 02/03/10 16:38:19.373 End paint...
05 02/03/10 16:38:19.374 End paint...
10 02/03/10 16:38:21.325 CMD_Goto_Screen message id 47 params: message 007AF318
10 02/03/10 16:38:21.325 Orbiter::CMD_Goto_DesignObj: 2071 with cant go back 0
10 02/03/10 16:38:21.325 Orbiter::CMD_Goto_DesignObj ObjectOffScreen : screen id 1, obj id 1255.1.0
10 02/03/10 16:38:21.326 Saving context for screen 47 / 05BEEAE0, object 2071.0.0 (71 variables, 80 visibility status) ...
01 02/03/10 16:38:40.327 Socket::ReceiveData-a 007930D8 failed ret 0
05 02/03/10 16:38:40.327 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Event Dev #77
05 02/03/10 16:38:40.327 Socket::SendReceiveMessage didn't get valid response ReceiveData failed
05 02/03/10 16:38:40.327 InternalSendCommand cannot send with return message.  type 1 id 35 to 6 Going to quit
05 02/03/10 16:38:40.327 Orbiter reloading...
10 02/03/10 16:38:40.327 Command_Impl::OnReload 77
05 02/03/10 16:38:40.327 Orbiter quiting...
10 02/03/10 16:38:40.327 Command_Impl::OnQuit forwarding quit's to children
13 02/03/10 16:38:40.327 Exiting MessageQueueThread_DCECI thread...
05 02/03/10 16:38:40.327 Populate datagrid: 63 failed
05 02/03/10 16:38:40.375 Socket::ReceiveData m_Socket 676 m_bQuit_get()1
05 02/03/10 16:38:40.375 Socket::ReceiveString2 ReceiveData failed m_Socket: 676 Command_Impl1 Dev #77
10 02/03/10 16:38:40.375 Requesthandler 003F97D0 (device: 77) Closing request handler connection
13 02/03/10 16:38:40.375 Exiting BeginHandleRequestThread thread...
10 02/03/10 16:38:40.397 About to quit EventLoop. Reload 1, ConnectionLost 4167632, Quit 4713421
10 02/03/10 16:38:42.398 Stage connect
10 02/03/10 16:38:42.399 Orbiter  003F97D0 is exiting
10 02/03/10 16:38:42.409 Waiting for Maint thread to finish...
10 02/03/10 16:38:42.409 Done with Maint thread.
10 02/03/10 16:38:42.409 Maint thread dead
10 02/03/10 16:38:42.409 Unregistering...
05 02/03/10 16:38:42.409 Socket::SendData socket is invalid
05 02/03/10 16:38:42.409 Socket::SendMessage *failed to send* type 1 id 255 from 77 to 9
05 02/03/10 16:38:42.409 InternalSendCommand cannot send with return message.  type 1 id 255 to 9 Going to quit
05 02/03/10 16:38:42.409 Orbiter reloading...
10 02/03/10 16:38:42.409 Command_Impl::OnReload 77
05 02/03/10 16:38:42.409 Orbiter quiting...
10 02/03/10 16:38:42.409 Command_Impl::OnQuit forwarding quit's to children
10 02/03/10 16:38:42.409 Unregistered!
10 02/03/10 16:38:42.409 Destroying orbiter's objects...
10 02/03/10 16:38:42.445 Orbiter's objects destroyed!
10 02/03/10 16:38:42.446 Waiting for message queue thread to quit
10 02/03/10 16:38:42.446 Message queue thread quit
10 02/03/10 16:38:42.446 Message queue thread joined
10 02/03/10 16:38:42.446 About to call kill spawned devices
10 02/03/10 16:38:42.447 ~Command_Impl finished
13 02/03/10 16:38:42.447 RequestSocket::Disconnect 003F97D0 device: 77
05 02/03/10 16:38:42.447 void ClientSocket::Disconnect() on this socket: 003F97D0 (m_Socket: 676)
10 02/03/10 16:38:42.451 Orbiter 057E0008 constructor
10 02/03/10 16:38:42.451 New orbiter created!
10 02/03/10 16:38:42.535 Connect OK
10 02/03/10 16:38:42.535 Orbiter SelfUpdate: starting
10 02/03/10 16:38:42.535 Requesthandler 057E0008 (device: 77) runThread now running
10 02/03/10 16:38:42.551 Current checksum : dummy orbiter d41d8cd98f00b204e9800998ecf8427e
10 02/03/10 16:38:42.551 Update available on the server.
01 02/03/10 16:38:42.553 The UpdateBinary application 'UpdateBinary.exe' is missing on the server.
01 02/03/10 16:38:42.553 Unable to download UpdateBinary application from the server.
10 02/03/10 16:38:42.553 Stage run
10 02/03/10 16:38:42.640 Initialize Get_Orbiter_Status (1) -O-
01 02/03/10 16:38:42.640 Directory: C77/ doesn't contain the orbiter's .info file.  Requesting files from the server.
10 02/03/10 16:38:44.717 CMD_Goto_Screen message id 1 params: message 048659B0
10 02/03/10 16:38:44.717 Param id:   159, value: 1
10 02/03/10 16:38:44.717 Param id:   195, value: 1
10 02/03/10 16:38:44.717 Param id:   251, value: 0
10 02/03/10 16:38:44.717 Param id:   252, value: 0
10 02/03/10 16:38:44.717 Param id:   253, value: 0
10 02/03/10 16:38:44.717 Orbiter::CMD_Goto_DesignObj: 1255.1.0 with cant go back 0
10 02/03/10 16:38:44.717 CMD_Bind_Icon 1255.0.0.1687.13 user 0 (size 0)
10 02/03/10 16:38:44.717 CMD_Bind_Icon 1255.0.0.2436.12 room 0 (size 0)
10 02/03/10 16:38:44.717 CMD_Bind_Icon 1255.0.0.3275.39 housemode0 1 (size 0)
10 02/03/10 16:38:44.717 CMD_Bind_Icon added 1255.0.0.3275.39 housemode0 1 (size 1)
10 02/03/10 16:38:44.717 CMD_Bind_Icon 1255.0.0.4781.36 user1 1 (size 1)
10 02/03/10 16:38:44.717 CMD_Bind_Icon added 1255.0.0.4781.36 user1 1 (size 2)
10 02/03/10 16:38:44.717 CMD_Bind_Icon 1255.0.0.5006.38 vm1 1 (size 2)
10 02/03/10 16:38:44.717 CMD_Bind_Icon added 1255.0.0.5006.38 vm1 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon 1255.1.0.1687.13 user 0 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon 1255.1.0.2436.12 room 0 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon 1255.1.0.3275.43 housemode0 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon added 1255.1.0.3275.43 housemode0 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon 1255.1.0.4781.40 user1 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon added 1255.1.0.4781.40 user1 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon 1255.1.0.5006.42 vm1 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon added 1255.1.0.5006.42 vm1 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon 1272.0.0.3275.120 housemode0 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon added 1272.0.0.3275.120 housemode0 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon 1272.1.0.3275.124 housemode0 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon added 1272.1.0.3275.124 housemode0 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon 1273.0.0.4781.138 user1 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon added 1273.0.0.4781.138 user1 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon 1273.0.0.5006.140 vm1 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon added 1273.0.0.5006.140 vm1 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon 1273.1.0.4781.153 user1 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon added 1273.1.0.4781.153 user1 1 (size 3)
10 02/03/10 16:38:44.718 CMD_Bind_Icon 1273.1.0.5006.155 vm1 1 (size 3)
10 02/03/10 1Any suggestions are welcome

Thx

Thingie
« Last Edit: February 03, 2010, 04:43:50 pm by Thingie »
Logged

sambuca

  • Guru
  • ****
  • Posts: 462
    • View Profile
Re: Getting really tired by now
« Reply #1 on: February 03, 2010, 05:57:17 pm »
Hi

Just a wild guess, but it may sound like loading all the cover art takes too long, and thereby causing the orbiter to reload.

What happens if you delete some of the cover art, can you open the videos then?

You should add a ticket for this in trac http://svn.linuxmce.org/trac.cgi/newticket for this, and add the log there also.

regards,
sambuca
Logged

Thingie

  • Veteran
  • ***
  • Posts: 114
    • View Profile
Re: Getting really tired by now
« Reply #2 on: February 04, 2010, 11:58:20 am »
Quote from: sambuca on February 03, 2010, 05:57:17 pm
Hi

Just a wild guess, but it may sound like loading all the cover art takes too long, and thereby causing the orbiter to reload.

What happens if you delete some of the cover art, can you open the videos then?
I deleted all the cover art but the result stays the same. When I look again to /home/mediapics there are new files there. I deleted them all but it seems LinuxMCE is rescanning my media and adding the pictures automatic. All the thumbnails of my music are gone but there was never a problem with the audio.

Quote from: sambuca on February 03, 2010, 05:57:17 pm
You should add a ticket for this in trac http://svn.linuxmce.org/trac.cgi/newticket for this, and add the log there also.

Submitted the ticket.
Logged

Andanotherusername

  • Regular Poster
  • **
  • Posts: 26
    • View Profile
Re: Getting really tired by now
« Reply #3 on: March 29, 2010, 07:55:43 am »
Have you figured out a solution to the problem? I have the same problem. I actually did the same steps that you did in your ticket description (before I read it). The ticket number is 586 (in case anybody wants to follow it). The sad part was to delete all the attributes/pictures so that the system will work for now.
Logged

Thingie

  • Veteran
  • ***
  • Posts: 114
    • View Profile
Re: Getting really tired by now
« Reply #4 on: March 29, 2010, 06:53:51 pm »
Quote from: Andanotherusername on March 29, 2010, 07:55:43 am
Have you figured out a solution to the problem? I have the same problem. I actually did the same steps that you did in your ticket description (before I read it). The ticket number is 586 (in case anybody wants to follow it). The sad part was to delete all the attributes/pictures so that the system will work for now.

Nope,

I made a ticket (http://svn.linuxmce.org/trac.cgi/ticket/586) 2 months ago but is still isn't assigned to anyone. I think we'll just have to wait till it's fixed. All developers are very busy and it seems to only affect a few people so it isn't a priority.
Logged
Pages: [1]
« previous next »
 

Sitemap