Cisco 7970 and Error Message

[John991]

Yes i installed today two network Card.

Eth0 : 172.26.27.0/24 (Internal Network)
Eth1: 172.26.28.0/24 (External Network)

[tschak909]

there may still be hard coded bits that expect the internal network to be 192.168.80.1.

Please install according to the factory settings.

-Thom

[John991]

Ok, Now i've Two Interface :

Eth0: 192.168.80.1 /24
Eth1: 172.26.28.1 /24

My Ip phone has IP Adress 192.168.80.254



No Work same error message.

[tschak909]

try making eth1 your internal card.

[John991]

I've a question, Why Orbietr work correctly on My PC on different VLAN or Subnet but that dosen't work with IP Phone ?

My server reboot.

Thank lot for your help.

[John991]

Same message.

I've too convert mac for Cisco 7970 & 7970 Orbiter.

:s

Regards

[John991]

I've applyed all how to and that don't work I don't undestand


Syslog messages :

192.168.80.253 - - [11/Jan/2010:15:53:57 -0800] "GET /pluto-admin/index.php?address=192.168.80.1&port=3451&deviceID=45&section=proxySocket&command=XML HTTP/1.1" 200 430 "-" "Allegro-Software-WebClient/4.20"
192.168.80.253 - - [11/Jan/2010:15:53:58 -0800] "GET /pluto-admin/security_images/generic_xml_error.png HTTP/1.1" 200 20309 "-" "Allegro-Software-WebClient/4.20"


Regard's

[tschak909]

did the system display a message on an orbiter that it detected the phone?

-Thom

[John991]

Yes Orbiter has been detected my phone. "Would you like add cisco 7970 IP Phone Orbiter ?"
A account has been created in Asterisk and Orbiter. My Ip Phone account is 201. No Problem.
The Orbiter Service is on my service Button. No Problem.

Just when i want press Service i've this message :

[tschak909]

THe phone should be in the 192.168.80. network along with the rest of the LinuxMCE devices... Asterisk is not connecting because you did not follow directions, exactly.

delete the phone from the web admin and try again.

[John991]

Hi,

The picture is old screenshot. My Ip Phone have ip address: 192.168.80.253.
Asterisk Work correctly.

It's same error but with ip address 192.168.80.253

Regard's

[John991]

Please Help Me.

Regards

[tschak909]

Did you delete the phone from the web admin section, and reload the router?

-Thom

[John991]

OK and ?

[tschak909]

the phone should detect, and the system should do the right work of adding the relevant configuration information. This is all you should ever have to do.

-Thom