DVB Cards info needed for Templates

[MANDINGO]

No that is because you have no analog ports on the card ie.. S video in etc...

[Jones]

Correct :-) Only an antenna port...

[MANDINGO]

Jones is your card the Hauppauge Nova-T 

[Xtra]

My MD identified the card correct now.
Unfortunately it did tell me, that it could not determine a provider list.
How can I submit my details? (Provider and channel list)

[ladekribs]

Hi I have a:

Hauppauge WinTV
Nova-t PCI (9003) Thomson DTT75105
PCI CX2388x
DVB-T (CX22702)
________________________________________________

sudo lspci -vn



01:07.0 0400: 14f1:8800 (rev 05)
        Subsystem: 0070:9002
        Flags: bus master, medium devsel, latency 64, IRQ 19
        Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data <?>
        Capabilities: [4c] Power Management version 2
        Kernel driver in use: cx8800
        Kernel modules: cx8800

01:07.2 0480: 14f1:8802 (rev 05)
        Subsystem: 0070:9002
        Flags: bus master, medium devsel, latency 64, IRQ 19
        Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
        Kernel driver in use: cx88-mpeg driver manager
        Kernel modules: cx8802


________________________________________________

sudo v4l2-ctl -n

ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : DVB
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
        Status  : 0

________________________________________________

[Viking]

Hi,

I have got three PCI cards and one USB.


- TT S2-3200 - DVB-S2 - http://www.linuxtv.org/wiki/index.php/TechnoTrend_TT-budget_S2-3200
  Need never drivers than 0810 has. The drivers from Convergent (Andrew) v4l_debs_convergent_20090723.zip works very nicely

- Opera S1 USB - DVB-S - http://www.linuxtv.org/wiki/index.php/DVB-S_USB_Devices#SIEMSSEN_.26_CO._-_Opera_S1
  need special firmware. dvb-usb-opera-01.fw and dvb-usb-opera1-fpga-01.fw

  I have attached the files as I don't remember where they came from and a quick search did not give any result.


- KNC ONE (Satelco Easy DVB) - DVB-C  http://www.linuxtv.org/wiki/index.php/Satelco_EasyWatch_PCI_(DVB-C)
  Is working with 0810 kernel. I am using it with the Convergent driver.

- TechnoTrend AV7110 - DVB-S (don't remember the exact model number - but it is one with built in MPEG decoder and TV out)
  Is working with 0810 kernel. I am using it with the Convergent driver.
 

If you need more info, please ask


------------------
  TT S2-3200
------------------

# lspci -vn

Code: [Select]

04:05.0 0480: 1131:7146 (rev 01)
        Subsystem: 13c2:1019
        Flags: bus master, medium devsel, latency 64, IRQ 20
        Memory at febffc00 (32-bit, non-prefetchable) [size=512]
        Kernel driver in use: budget_ci dvb
        Kernel modules: snd-aw2, budget-ci



------------------
    KNC ONE
------------------

# lspci -vn

Code: [Select]

04:06.0 0480: 1131:7146 (rev 01)
        Subsystem: 1894:0022
        Flags: bus master, medium devsel, latency 64, IRQ 21
        Memory at febff800 (32-bit, non-prefetchable) [size=512]
        Kernel driver in use: budget_av
        Kernel modules: snd-aw2, budget-av


------------------
TechnoTrend AV7110
------------------

# lspci -vn

Code: [Select]

04:07.0 0480: 1131:7146 (rev 01)
        Subsystem: 13c2:0000
        Flags: bus master, medium devsel, latency 64, IRQ 22
        Memory at febff400 (32-bit, non-prefetchable) [size=512]
        Kernel driver in use: dvb
        Kernel modules: snd-aw2, dvb-ttpci


---------------
 Opera S1 USB
---------------

lsusb -vv

Code: [Select]

Bus 005 Device 002: ID 695c:3829
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        64
  idVendor           0x695c
  idProduct          0x3829
  bcdDevice            0.00
  iManufacturer           1 Gmbh
  iProduct                2 DVB-S1
  iSerial                 3 1234
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 HIGH?????
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

[Kezza]

Just did a reinstall of MCE and selected Nova T-500 from web admin and YAY! went into MythTV and everything was setup just had to scan channels and was watching TV

Thanks for all work on this Mandingo looks like quite a few cards in there now.

[MANDINGO]

  Keep them cards comming fellas with all the info

Side note: another bug was found with one of the plugins and is getting a little work done to accomidate handling hybrid cards the correct way.  Once the fixed has been tested and approve there will be a bunch of new cards availble for auto detection 

Mandingo

[MANDINGO]

Just did a reinstall of MCE and selected Nova T-500 from web admin and YAY! went into MythTV and everything was setup just had to scan channels and was watching TV

Thanks for all work on this Mandingo looks like quite a few cards in there now.

Kezza you shouldnt of had to select it from the MD page but it should have auto detected it....
Could you please post your sudo lspci -vn information of the card so i could see thanks

Mandingo

[MANDINGO]

Im still looking for the haupauge users out there hit me up and post your card info.....


Mandingo

[Lexje]

Im still looking for the haupauge users out there hit me up and post your card info.....


Mandingo

Mandingo,

Have you been able to use my info on the HVR-4000?

Thx,

Erwin

[MANDINGO]

Im still looking for the haupauge users out there hit me up and post your card info.....


Mandingo

Mandingo,

Have you been able to use my info on the HVR-4000?

Thx,

Erwin

Lexje no because the info that was posted wasnt what i needed but if you could post the info that would be great....

sorry i stand corrected i just saw the attachement and yes the info was helpfull but i still need the rest thanks

[Jones]

Jones is your card the Hauppauge Nova-T 

No, it is a 2 x Satelco EasyWatch PCI (DVB-C)
http://www.linuxtv.org/wiki/index.php/Satelco_EasyWatch_PCI_(DVB-C)


Keep up the good work :-)
Jones

[Lexje]

Im still looking for the haupauge users out there hit me up and post your card info.....


Mandingo

Mandingo,

Have you been able to use my info on the HVR-4000?

Thx,

Erwin

Lexje no because the info that was posted wasnt what i needed but if you could post the info that would be great....

sorry i stand corrected i just saw the attachement and yes the info was helpfull but i still need the rest thanks

Hi Mandingo,
I've added the missing info to the HVR-4000 previous post http://forum.linuxmce.org/index.php?topic=9354.msg64242#msg64242
Please let me know if this is sufficient.
Erwin

[MANDINGO]

Lexje  Great you are good i seem to have over looked a couple of things sorry about that and the 4000 is in the system im just working on the deb for installation of the drivers etc.....

Keep the cards comming, need testing of the haupauge line of cards

Mandingo