Author Topic: DVB Cards info needed for Templates  (Read 192696 times)

tariqh

  • Newbie
  • *
  • Posts: 7
    • View Profile
    • user setup
Re: DVB Cards info needed for Templates
« Reply #15 on: December 22, 2009, 08:12:44 pm »

We dont have a device template for the T500... cue Thom to give me a 'bashing' for not having one ;-)

...but we do have it working very well using our V4l package (PM me if any of you would like a copy...its DKMS based so will work correctly on 0710 or 0810...or indeed 0910 too ;-)  )...and reliably in Myth now. The only issue we see is that if we reboot the T500's do not get in initialised properly from a 'warm' firmware boot. The solution is to do a shutdown, remove the power for 15 secs or so, then powerup and all is well. This is an irritation but compared to before when the T500 was so unstable it was unusable its very acceptable!

All the best for Xmas and for the new year too!

Andrew


im taking you up on the offer , PM sent :)

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #16 on: December 22, 2009, 08:59:52 pm »
There was a nasty little issue found with some code not allowing the host name of the computer to be added to the myth db and is getting fixed, allowing me to soon crank out some more templates  ;D

So keep them comming and no one will go ignored just remember the info to post
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

buckle

  • Veteran
  • ***
  • Posts: 68
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #17 on: December 23, 2009, 04:39:24 am »
...
So keep them comming and no one will go ignored just remember the info to post

DViCo FusionHDTV7 Dual Express - The lspci bits were already up on the wiki I created for this card.  I ran the v4l2-ctl and added the output but soon realized that the analog inputs were likely from the usb tuner card I have plugged in (I'll post the info for it soon).  The driver for this card does not support the analog inputs.  http://wiki.linuxmce.org/index.php/DViCO_FusionHDTV7_Dual_Express

This card requires the xc5000 firmware.  There are two versions that I have used, depending on which the kernel requests (1.1 or 1.6.114).

Replied as soon as I saw this post...I was away from the forums for a couple days.  Keep up the good work. 

freaky

  • Regular Poster
  • **
  • Posts: 24
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #18 on: December 23, 2009, 01:40:41 pm »
I have the Hauppauge Nova-S plus PCI Card DVB-S

sudo lspci -vn  brings:

Code: [Select]
00:00.0 0600: 8086:2e20 (rev 03)
        Subsystem: 1043:8336   
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel modules: intel-agp                         

00:01.0 0604: 8086:2e21 (rev 03)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff                       
        Memory behind bridge: f6000000-f9cfffff                     
        Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
        Capabilities: [88] Subsystem: 1043:8336                             
        Capabilities: [80] Power Management version 3                       
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+                                                                         
        Capabilities: [a0] Express Root Port (Slot+), MSI 00                   
        Capabilities: [100] Virtual Channel <?>                                 
        Capabilities: [140] Root Complex Link <?>                               
        Kernel driver in use: pcieport-driver                                   
        Kernel modules: shpchp                                                 

00:1a.0 0c03: 8086:3a37
        Subsystem: 1043:82d4
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at b800 [size=32]                       
        Capabilities: [50] Vendor Specific Information <?>
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1a.1 0c03: 8086:3a38
        Subsystem: 1043:82d4
        Flags: bus master, medium devsel, latency 0, IRQ 21
        I/O ports at b880 [size=32]                       
        Capabilities: [50] Vendor Specific Information <?>
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1a.2 0c03: 8086:3a39                                                         
        Subsystem: 1043:82d4                                                   
        Flags: bus master, medium devsel, latency 0, IRQ 18                     
        I/O ports at bc00 [size=32]                                             
        Capabilities: [50] Vendor Specific Information <?>                     
        Kernel driver in use: uhci_hcd                                         
        Kernel modules: uhci-hcd                                               

00:1a.7 0c03: 8086:3a3c (prog-if 20)
        Subsystem: 1043:82d4       
        Flags: bus master, medium devsel, latency 0, IRQ 18
        Memory at f5fffc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2         
        Capabilities: [58] Debug port: BAR=1 offset=00a0       
        Capabilities: [98] Vendor Specific Information <?>     
        Kernel driver in use: ehci_hcd                         
        Kernel modules: ehci-hcd                               

00:1b.0 0403: 8086:3a3e
        Subsystem: 1043:82fe
        Flags: bus master, fast devsel, latency 0, IRQ 22
        Memory at f5ff8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2           
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-                                                                         
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00     
        Capabilities: [100] Virtual Channel <?>                                 
        Capabilities: [130] Root Complex Link <?>                               
        Kernel driver in use: HDA Intel                                         
        Kernel modules: snd-hda-intel                                           

00:1c.0 0604: 8086:3a40
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        Prefetchable memory behind bridge: 00000000f4f00000-00000000f4ffffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00               
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+                                                                         
        Capabilities: [90] Subsystem: 1043:82d4                                 
        Capabilities: [a0] Power Management version 2                           
        Capabilities: [100] Virtual Channel <?>                                 
        Capabilities: [180] Root Complex Link <?>                               
        Kernel driver in use: pcieport-driver                                   
        Kernel modules: shpchp                                                 

00:1c.3 0604: 8086:3a46
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        Memory behind bridge: f9f00000-f9ffffff                     
        Capabilities: [40] Express Root Port (Slot+), MSI 00       
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+                                                                         
        Capabilities: [90] Subsystem: 1043:82d4                                 
        Capabilities: [a0] Power Management version 2                           
        Capabilities: [100] Virtual Channel <?>                                 
        Capabilities: [180] Root Complex Link <?>                               
        Kernel driver in use: pcieport-driver                                   
        Kernel modules: shpchp                                                 

00:1c.4 0604: 8086:3a48
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000e000-0000efff                       
        Memory behind bridge: f9e00000-f9efffff                     
        Capabilities: [40] Express Root Port (Slot+), MSI 00       
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+                                                                         
        Capabilities: [90] Subsystem: 1043:82d4                                 
        Capabilities: [a0] Power Management version 2                           
        Capabilities: [100] Virtual Channel <?>                                 
        Capabilities: [180] Root Complex Link <?>                               
        Kernel driver in use: pcieport-driver                                   
        Kernel modules: shpchp                                                 

00:1c.5 0604: 8086:3a4a
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff                       
        Memory behind bridge: f9d00000-f9dfffff                     
        Prefetchable memory behind bridge: 00000000f4e00000-00000000f4efffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00               
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+                                                                         
        Capabilities: [90] Subsystem: 1043:82d4                                 
        Capabilities: [a0] Power Management version 2                           
        Capabilities: [100] Virtual Channel <?>                                 
        Capabilities: [180] Root Complex Link <?>                               
        Kernel driver in use: pcieport-driver                                   
        Kernel modules: shpchp                                                 

00:1d.0 0c03: 8086:3a34
        Subsystem: 1043:82d4
        Flags: bus master, medium devsel, latency 0, IRQ 23
        I/O ports at b080 [size=32]                       
        Capabilities: [50] Vendor Specific Information <?>
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.1 0c03: 8086:3a35
        Subsystem: 1043:82d4
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at b400 [size=32]                       
        Capabilities: [50] Vendor Specific Information <?>
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.2 0c03: 8086:3a36
        Subsystem: 1043:82d4
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at b480 [size=32]                       
        Capabilities: [50] Vendor Specific Information <?>
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.7 0c03: 8086:3a3a (prog-if 20)
        Subsystem: 1043:82d4       
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at f5fff800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2         
        Capabilities: [58] Debug port: BAR=1 offset=00a0       
        Capabilities: [98] Vendor Specific Information <?>     
        Kernel driver in use: ehci_hcd                         
        Kernel modules: ehci-hcd                               

00:1e.0 0604: 8086:244e (rev 90) (prog-if 01)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
        Memory behind bridge: fa000000-fdffffff                     
        Capabilities: [50] Subsystem: 1043:82d4                     

00:1f.0 0601: 8086:3a18
        Subsystem: 1043:82d4
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] Vendor Specific Information <?>

00:1f.2 0101: 8086:3a20 (prog-if 8a [Master SecP PriP])
        Subsystem: 1043:82d4                           
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
        I/O ports at 01f0 [size=8]                               
        I/O ports at 03f4 [size=1]                               
        I/O ports at 0170 [size=8]                               
        I/O ports at 0374 [size=1]                               
        I/O ports at ff90 [size=16]                               
        I/O ports at ffa0 [size=16]                               
        Capabilities: [70] Power Management version 3             
        Capabilities: [b0] Vendor Specific Information <?>       
        Kernel driver in use: ata_piix                           
        Kernel modules: ata_piix                                 

00:1f.3 0c05: 8086:3a30
        Subsystem: 1043:82d4
        Flags: medium devsel, IRQ 3
        Memory at f5fff400 (64-bit, non-prefetchable) [size=256]
        I/O ports at 0400 [size=32]                             
        Kernel modules: i2c-i801                               

00:1f.5 0101: 8086:3a26 (prog-if 85 [Master SecO PriO])
        Subsystem: 1043:82d4                           
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
        I/O ports at b000 [size=8]                               
        I/O ports at ac00 [size=4]                               
        I/O ports at a880 [size=8]                               
        I/O ports at a800 [size=4]                               
        I/O ports at a480 [size=16]                               
        I/O ports at a400 [size=16]                               
        Capabilities: [70] Power Management version 3             
        Capabilities: [b0] Vendor Specific Information <?>       
        Kernel driver in use: ata_piix                           
        Kernel modules: ata_piix                                 

01:00.0 0300: 10de:0614 (rev a2)
        Subsystem: 1043:82de   
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
        Memory at e0000000 (64-bit, prefetchable) [size=256M]   
        Memory at f6000000 (64-bit, non-prefetchable) [size=32M]
        I/O ports at cc00 [size=128]                           
        [virtual] Expansion ROM at f9ce0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 3             
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-                                                                         
        Capabilities: [78] Express Endpoint, MSI 00                             
        Capabilities: [100] Virtual Channel <?>                                 
        Capabilities: [128] Power Budgeting <?>                                 
        Capabilities: [600] Vendor Specific Information <?>                     
        Kernel driver in use: nvidia                                           
        Kernel modules: nvidiafb, nvidia                                       

02:00.0 0200: 10ec:8168 (rev 02)
        Subsystem: 1043:82c6   
        Flags: bus master, fast devsel, latency 0, IRQ 218
        I/O ports at d800 [size=256]                     
        Memory at f4eff000 (64-bit, prefetchable) [size=4K]
        Memory at f4ee0000 (64-bit, prefetchable) [size=64K]
        Expansion ROM at f9df0000 [disabled] [size=64K]     
        Capabilities: [40] Power Management version 3       
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+                                                                         
        Capabilities: [70] Express Endpoint, MSI 01                             
        Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2                       
        Capabilities: [d0] Vital Product Data <?>                               
        Capabilities: [100] Advanced Error Reporting <?>                       
        Capabilities: [140] Virtual Channel <?>                                 
        Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00       
        Kernel driver in use: r8169                                             
        Kernel modules: r8169                                                   

03:00.0 0101: 11ab:6121 (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: 1043:82a2                                             
        Flags: bus master, fast devsel, latency 0, IRQ 16                 
        I/O ports at ec00 [size=8]                                       
        I/O ports at e880 [size=4]                                       
        I/O ports at e800 [size=8]                                       
        I/O ports at e480 [size=4]                                       
        I/O ports at e400 [size=16]                                       
        Memory at f9effc00 (32-bit, non-prefetchable) [size=1K]           
        Capabilities: [48] Power Management version 2                     
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-                                                                         
        Capabilities: [e0] Express Legacy Endpoint, MSI 00                     
        Capabilities: [100] Advanced Error Reporting <?>                       
        Kernel driver in use: pata_marvell                                     
        Kernel modules: pata_marvell, ahci                                     

04:00.0 0c00: 197b:2380 (prog-if 10)
        Subsystem: 1043:8313       
        Flags: bus master, fast devsel, latency 0, IRQ 19
        Memory at f9fff800 (32-bit, non-prefetchable) [size=2K]
        Memory at f9fff400 (32-bit, non-prefetchable) [size=128]
        Memory at f9fff000 (32-bit, non-prefetchable) [size=128]
        Memory at f9ffec00 (32-bit, non-prefetchable) [size=128]
        Capabilities: [44] Power Management version 3
        Capabilities: [80] Express Endpoint, MSI 00
        Capabilities: [94] Message Signalled Interrupts: Mask- 64bit- Queue=0/0Enable-
        Kernel driver in use: ohci1394
        Kernel modules: ohci1394

06:00.0 0400: 14f1:8800 (rev 05)
        Subsystem: 0070:9202
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data <?>
        Capabilities: [4c] Power Management version 2
        Kernel driver in use: cx8800
        Kernel modules: cx8800

06:00.1 0480: 14f1:8801 (rev 05)
        Subsystem: 0070:9202
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
        Kernel driver in use: cx88_audio
        Kernel modules: cx88-alsa

06:00.2 0480: 14f1:8802 (rev 05)
        Subsystem: 0070:9202
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
        Kernel driver in use: cx88-mpeg driver manager
        Kernel modules: cx8802

06:00.4 0480: 14f1:8804 (rev 05)
        Subsystem: 0070:9202
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2

sudo v4l2-ctl -n   brings:

Code: [Select]
ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : DVB
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
        Status  : 0

        Input   : 1
        Name    : Composite1
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
        Status  : 0

        Input   : 2
        Name    : S-Video
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
        Status  : 0

is there anything else I can do....

thanks so far
freaky


MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #19 on: December 26, 2009, 06:11:40 am »
;D ok there are new templates now in the CVS but some of you will need to install drivers and firmware, remember these templates might not be complete do to me not having the hardware to test, So feed back is welcomed and keep the cards coming as so we can get most of the common cards used into the 810 release.

there will be some new debs for cards and firmware soon

Mandingo
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

Jubert26

  • Making baby steps
  • Posts: 2
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #20 on: December 27, 2009, 11:20:15 am »
I have an ATI tv-wonder VE if memory serves me correct it shows up as a Brooktree bt878 chipset
lspci output
Code: [Select]
01:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
01:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)

lspci -v output
Code: [Select]
01:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
        Subsystem: ATI Technologies Inc Device 0003
        Flags: bus master, medium devsel, latency 64, IRQ 17
        Memory at ff6fe000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data <?>
        Capabilities: [4c] Power Management version 2
        Kernel driver in use: bttv
        Kernel modules: bttv

01:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
        Subsystem: ATI Technologies Inc Device 0003
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at ff6ff000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data <?>
        Capabilities: [4c] Power Management version 2

lspci -vn output
Code: [Select]
01:02.0 0400: 109e:036e (rev 11)
        Subsystem: 1002:0003
        Flags: bus master, medium devsel, latency 64, IRQ 17
        Memory at ff6fe000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data <?>
        Capabilities: [4c] Power Management version 2
        Kernel driver in use: bttv
        Kernel modules: bttv

01:02.1 0480: 109e:0878 (rev 11)
        Subsystem: 1002:0003
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at ff6ff000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data <?>
        Capabilities: [4c] Power Management version 2

v4l2-ctl -n output
Code: [Select]
ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : Television
        Type    : 0x00000001
        Audioset: 0x00000001
        Tuner   : 0x00000000
        Standard: 0x0000000000FFBFFF ( PAL NTSC SECAM )
        Status  : 256

        Input   : 1
        Name    : Composite1
        Type    : 0x00000002
        Audioset: 0x00000001
        Tuner   : 0x00000000
        Standard: 0x0000000000FFBFFF ( PAL NTSC SECAM )
        Status  : 0


EDIT:::
ALL IS GOOD EXCEPT SOUND NOW!!!
TYVM MANDINGO



Hope this helps
Pugs
« Last Edit: December 27, 2009, 12:54:04 pm by Jubert26 »

bongowongo

  • wants to work for LinuxMCE
  • **
  • Posts: 826
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #21 on: December 27, 2009, 11:41:22 am »
Pinnacle PCTV Hybrid Pro 310i pci

lspci -vn

Code: [Select]
00:00.0 0600: 1106:0308                
        Subsystem: 1849:0308          
        Flags: bus master, medium devsel, latency 8
        Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [80] AGP version 3.5                  
        Capabilities: [50] Power Management version 2      
        Kernel driver in use: agpgart-via                  
        Kernel modules: via-agp                            

00:00.1 0600: 1106:1308
        Subsystem: 1849:1308
        Flags: bus master, medium devsel, latency 0

00:00.2 0600: 1106:2308
        Subsystem: 1849:2308
        Flags: bus master, medium devsel, latency 0

00:00.3 0600: 1106:3208
        Flags: bus master, medium devsel, latency 0
        Kernel modules: via-agp                    

00:00.4 0600: 1106:4308
        Subsystem: 1849:4308
        Flags: bus master, medium devsel, latency 0

00:00.5 0800: 1106:5308 (prog-if 20)
        Subsystem: 1849:5308        
        Flags: bus master, fast devsel, latency 0

00:00.7 0600: 1106:7308
        Flags: bus master, medium devsel, latency 0

00:01.0 0604: 1106:b198
        Flags: bus master, 66MHz, medium devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Capabilities: [70] Power Management version 2              
        Kernel modules: shpchp                                      
                                                                                                                        
00:02.0 0604: 1106:a208                                                                                                  
        Flags: bus master, fast devsel, latency 0                                                                        
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0                                                    
        Memory behind bridge: fc000000-fe9fffff                                                                          
        Prefetchable memory behind bridge: d0000000-dfffffff                                                            
        Capabilities: [40] Express Root Port (Slot+), MSI 00                                                            
        Capabilities: [68] Power Management version 2                                                                    
        Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+                                  
        Capabilities: [100] Advanced Error Reporting <?>                                                                
        Capabilities: [140] Virtual Channel <?>                                                                          
        Kernel driver in use: pcieport-driver                                                                            
        Kernel modules: shpchp                                                                                          

00:0f.0 0101: 1106:5372 (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: 1849:5372                                    
        Flags: bus master, medium devsel, latency 32, IRQ 21    
        I/O ports at dc00 [size=8]                              
        I/O ports at d880 [size=4]                              
        I/O ports at d800 [size=8]                              
        I/O ports at d480 [size=4]                              
        I/O ports at d400 [size=16]                              
        I/O ports at d000 [size=256]                            
        Capabilities: [c0] Power Management version 2            
        Kernel driver in use: sata_via                          
        Kernel modules: sata_via                                

00:0f.1 0101: 1106:0571 (rev 07) (prog-if 8a [Master SecP PriP])
        Subsystem: 1849:0571                                    
        Flags: bus master, medium devsel, latency 32            
        [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
        [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
        I/O ports at fc00 [size=16]                                                
        Capabilities: [c0] Power Management version 2                              
        Kernel driver in use: pata_via                                            
        Kernel modules: pata_via                                                  

00:10.0 0c03: 1106:3038 (rev b0)
        Subsystem: 1849:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 20
        I/O ports at c480 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

00:10.1 0c03: 1106:3038 (rev b0)
        Subsystem: 1849:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 22
        I/O ports at c800 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

00:10.2 0c03: 1106:3038 (rev b0)
        Subsystem: 1849:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 21
        I/O ports at c880 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

00:10.3 0c03: 1106:3038 (rev b0)
        Subsystem: 1849:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 23
        I/O ports at cc00 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

00:10.4 0c03: 1106:3104 (rev 90) (prog-if 20)
        Subsystem: 1849:3104                
        Flags: bus master, medium devsel, latency 32, IRQ 21
        Memory at f7fffc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2          
        Capabilities: [88] Debug port: BAR=1 offset=00a0        
        Kernel driver in use: ehci_hcd                          
        Kernel modules: ehci-hcd                                

00:11.0 0601: 1106:3372
        Subsystem: 1849:3372
        Flags: medium devsel
        Capabilities: [c0] Power Management version 2
        Kernel modules: i2c-viapro                  

00:11.7 0600: 1106:287e
        Subsystem: 1106:337e
        Flags: bus master, medium devsel, latency 32
        Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration

00:12.0 0200: 1106:3065 (rev 7c)
        Subsystem: 1849:3065    
        Flags: bus master, medium devsel, latency 32, IRQ 23
        I/O ports at c000 [size=256]                        
        Memory at f7fff800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Power Management version 2          
        Kernel driver in use: via-rhine                        
        Kernel modules: via-rhine                              

00:13.0 0600: 1106:337b
        Flags: bus master, fast devsel, latency 0
        Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed+

00:13.1 0604: 1106:337a (prog-if 01)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000e000-0000efff                        
        Memory behind bridge: fea00000-feafffff                    
        Prefetchable memory behind bridge: 0000000050000000-00000000500fffff
        Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed+      
        Capabilities: [70] Subsystem: 1849:337a                            

02:00.0 0300: 10de:0163 (rev a1)
        Subsystem: 1043:820b    
        Flags: bus master, fast devsel, latency 0, IRQ 24
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]  
        Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
        [virtual] Expansion ROM at fe9e0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [78] Express Endpoint, MSI 00
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [128] Power Budgeting <?>
        Kernel driver in use: nvidia
        Kernel modules: nvidia, nvidiafb

03:04.0 0200: 10ec:8169 (rev 10)
        Subsystem: 10ec:8169
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
        I/O ports at e800 [size=256]
        Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
        Expansion ROM at 50000000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
        Kernel driver in use: r8169
        Kernel modules: r8169

03:06.0 0480: 1131:7133 (rev d1)
        Subsystem: 11bd:002f
        Flags: bus master, medium devsel, latency 32, IRQ 19
        Memory at feaff000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2
        Kernel driver in use: saa7134
        Kernel modules: saa7134

80:01.0 0403: 1106:3288 (rev 10)
        Subsystem: 1849:0888
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
        Capabilities: [100] Virtual Channel <?>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

v4l2-ctl -n will follow shortly

did a "dmesg | grep saa7133", and driver was already loaded. Didn't need to download a driver to my knowledge.
« Last Edit: December 27, 2009, 11:53:07 am by bongowongo »

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #22 on: December 28, 2009, 07:46:11 am »
 ;D that template has been in the sqlCVS, what you have to do is update your system via CVS
open webadmin
then advance up at the top
then sqlCVS then update
check all and then next
and after update is done
reload
it takes a little and another window will open say success !!

I still need testers
and more cards keep em coming

Mandingo
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

bongowongo

  • wants to work for LinuxMCE
  • **
  • Posts: 826
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #23 on: December 28, 2009, 02:10:59 pm »
which template?

Lexje

  • Guru
  • ****
  • Posts: 230
    • View Profile
HVR-4000
« Reply #24 on: December 28, 2009, 04:03:40 pm »
Mandingo, here's my info:

sudo lspci -vn > lspci.txt is attached

This is what I did to get the correct firmware:
Code: [Select]
* delving into firmware of HVR-4000
** look here for [[http://ubuntuforums.org/showpost.php?p=8217434&postcount=6][info]]
  
   -rw-r--r-- 1 root root 32522 2009-11-01 21:57 /lib/firmware/dvb-fe-cx24116.fw
   md5sum /lib/firmware/dvb-fe-cx24116.fw
   417cafd3b10e207e1dba9a03ad63e405 /lib/firmware/dvb-fe-cx24116.fw

   As soon as the file is in the directory, the card will work properly. No rebooting or changing run levels required.

   You should see this healthy report from the kernel when a program accesses the card (such as mythtv doing a channel scan with it):

   [42984.651309] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
   [42984.651324] cx8800 0000:01:08.0: firmware: requesting dvb-fe-cx24116.fw
   [42984.661140] cx24116_firmware_ondemand: Waiting for firmware upload(2)...
   [42989.799701] cx24116_load_firmware: FW version 1.20.79.0
   [42989.799717] cx24116_firmware_ondemand: Firmware upload complete

   My channel scanning now works perfectly. Hope this helps someone else
** compare to mine:
  
   linuxmce@mythrouter:/lib/firmware$ md5sum dvb-fe-cx24116.fw
   dd8dfdfca6b72462d9db8032f78631c8  dvb-fe-cx24116.fw
** went to fetch Firmware v1.20.79.0
   linuxmce@mythrouter:/lib/firmware$ md5sum dvb-fe-cx24116.fw
   417cafd3b10e207e1dba9a03ad63e405  dvb-fe-cx24116.fw

During the previous couple of weeks I did a lot of test setup's in all kinds of ways. As stated earlier I have tried and tested both the standard v4l-dvb repositories at linuxtv.org as well as the s2-liplianin repository. At a certain point nothing would work any more.
I am not a specialist in mercurial or git, but I did some searching and went back to some of the test installs.
I found that hg parents gave me detailed info on the repository installed.

This was the hg parent info of a working install:
Code: [Select]
*** hg parents
    linuxmce@dcerouter:/usr/local/src/v4l-dvb$ hg parents
    Not trusting file /usr/local/src/v4l-dvb/.hg/hgrc from untrusted user root, group root
    Not trusting file /usr/local/src/v4l-dvb/.hg/hgrc from untrusted user root, group root
    changeset:   13486:b7aed635c722
    tag:         tip
    parent:      13476:94eeadb13b55
    parent:      13485:98ae95e7390b
    user:        Mauro Carvalho Chehab <mchehab@redhat.com>
    date:        Wed Nov 25 16:48:18 2009 -0200
    summary:     merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-misc

To put in place this specific set of the repo:
hg clone -r 13486 http://...

05-01-2010
Here's the additional sudo v4l2-ctl -n info:
Code: [Select]
linuxmce@dcerouter:~$ sudo v4l2-ctl -n
ioctl: VIDIOC_ENUMINPUT
Input   : 0
Name    : Television
Type    : 0x00000001
Audioset: 0x00000000
Tuner   : 0x00000000
Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
Status  : 0

Input   : 1
Name    : Composite1
Type    : 0x00000002
Audioset: 0x00000000
Tuner   : 0x00000000
Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
Status  : 0

Input   : 2
Name    : S-Video
Type    : 0x00000002
Audioset: 0x00000000
Tuner   : 0x00000000
Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
Status  : 0

If you require more info just let me know.
If you want me to do testing, let me know what steps I need to make, and I'll swap in a blank hd and test anew.

Thanks for your input!

Erwin



« Last Edit: January 05, 2010, 09:24:07 am by Lexje »

Xtra

  • Regular Poster
  • **
  • Posts: 19
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #25 on: December 28, 2009, 05:40:54 pm »
technisat cablestar hd2

Code: [Select]
02:0a.0 0480: 1822:4e35 (rev 01)
        Subsystem: 1ae4:0002
        Flags: bus master, medium devsel, latency 64, IRQ 22
        Memory at dfeff000 (32-bit, prefetchable) [size=4K]
        Kernel driver in use: Mantis
        Kernel modules: mantis
Mantis module compiled from http://mercurial.intuxication.org/hg/s2-liplianin (selectively compiled, hence there are a whole lot more drivers included).

Struggeling to make vdr actually use it now. I mean, it does open the device (listed in lsof and I get device is busy when trying to scan for channels while vdr is running) but it says "no signal" when switching to TV on my orbiter.
Any hints are welcome.

colinjones

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 3003
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #26 on: December 28, 2009, 09:12:41 pm »
if you're getting device busy while vdr is running, that is why :) ... vdr is using the tuners, you have to stop it first so that scan can use them. check out the instructions on the wiki as this is explained.

Xtra

  • Regular Poster
  • **
  • Posts: 19
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #27 on: December 28, 2009, 11:08:05 pm »
I'm sorry, I did not make myself clear above.
I was able to scan for channels after killing vdr-kbd and put the channels.conf to /etc/vdr/channels.conf (it contains a ton of channels and several more tons of scrambled channels)

After that I rebootet to make sure vdr is coming up normally (what, according to the logs it did).

But vdr from the orbiter insists to have "no signal".
My mentioning of the device being busy above was meant to emphasize that vdr is in fact using the device (keeping it open and therefore restricting other apps from using it).

Sorry for any misunderstanding.

darrenmason

  • Addicted
  • *
  • Posts: 529
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #28 on: December 29, 2009, 01:36:40 am »
Mandingo,

I have two older cards but thought I would give you the info anyway.

They are Winfast DTV-1000T PCI cards.

sudo lspci -vn
Code: [Select]
00:00.0 0600: 8086:1a30 (rev 11)
Subsystem: 8086:1a30
Flags: bus master, fast devsel, latency 0
Memory at f2000000 (32-bit, prefetchable) [size=32M]
Capabilities: [e4] Vendor Specific Information
Capabilities: [a0] AGP version 2.0

00:01.0 0604: 8086:1a31 (rev 11) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: f4900000-f69fffff
Prefetchable memory behind bridge: ec600000-f06fffff

00:1d.0 0c03: 8086:24c2 (rev 01) (prog-if 00 [UHCI])
Subsystem: 8086:5032
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at e800 [size=32]

00:1d.1 0c03: 8086:24c4 (rev 01) (prog-if 00 [UHCI])
Subsystem: 8086:5032
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at e880 [size=32]

00:1d.2 0c03: 8086:24c7 (rev 01) (prog-if 00 [UHCI])
Subsystem: 8086:5032
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ec00 [size=32]

00:1d.7 0c03: 8086:24cd (rev 01) (prog-if 20 [EHCI])
Subsystem: 8086:5032
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port

00:1e.0 0604: 8086:244e (rev 81) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f6a00000-feafffff
Prefetchable memory behind bridge: f0700000-f07fffff

00:1f.0 0601: 8086:24c0 (rev 01)
Flags: bus master, medium devsel, latency 0

00:1f.1 0101: 8086:24cb (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: 8086:5032
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ffa0 [size=16]
Memory at 50000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 0c05: 8086:24c3 (rev 01)
Subsystem: 8086:5032
Flags: medium devsel, IRQ 20
I/O ports at e000 [size=32]

00:1f.5 0401: 8086:24c5 (rev 01)
Subsystem: 8086:0102
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at e400 [size=256]
I/O ports at e080 [size=64]
Memory at febff800 (32-bit, non-prefetchable) [size=512]
Memory at febff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2

01:00.0 0300: 10de:002d (rev 15) (prog-if 00 [VGA])
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Memory at ee000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at f69f0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Capabilities: [44] AGP version 2.0

02:00.0 0780: 1057:5608
Subsystem: 1057:0000
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at d800 [size=256]
Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2

02:02.0 0400: 14f1:8800 (rev 05)
Subsystem: 107d:665f
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

02:02.2 0480: 14f1:8802 (rev 05)
Subsystem: 107d:665f
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2

02:0c.0 0200: 10ec:8169 (rev 10)
Subsystem: 1385:311a
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 20
I/O ports at d400 [size=256]
Memory at feafec00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at f0700000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2

02:0d.0 0200: 1113:1211 (rev 10)
Subsystem: 1113:1211
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at d000 [size=256]
Memory at feafe800 (32-bit, non-prefetchable) [size=256]
Expansion ROM at f0720000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2

02:0e.0 0400: 14f1:8800 (rev 05)
Subsystem: 107d:665f
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

02:0e.2 0480: 14f1:8802 (rev 05)
Subsystem: 107d:665f
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2

sudo v4l2-ctl -n
Code: [Select]
ioctl: VIDIOC_ENUMINPUT
Input   : 0
Name    : DVB
Type    : 0x00000002
Audioset: 0x00000000
Tuner   : 0x00000000
Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
Status  : 0

Input   : 1
Name    : Composite1
Type    : 0x00000002
Audioset: 0x00000000
Tuner   : 0x00000000
Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
Status  : 0

Input   : 2
Name    : S-Video
Type    : 0x00000002
Audioset: 0x00000000
Tuner   : 0x00000000
Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
Status  : 0
Both cards are the same so only included this for default /dev/video0

Drivers were standard part of 7.10 install and cards work very well with no issues whatsoever.
If firmware was required I did nothing explicit to get it.

Thanks for your efforts
Darren

Jones

  • Regular Poster
  • **
  • Posts: 20
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #29 on: December 29, 2009, 08:02:59 pm »
Here you go :-)

Card information:
   Philips Semiconductors SAA7146 (rev 01)
   Interface: PCI
   DVB-C

sudo lspci -vn

09:00.0 0480: 1131:7146 (rev 01)
        Subsystem: 1894:0022
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at fbeffc00 (32-bit, non-prefetchable) [size=512]
        Kernel driver in use: budget_av
        Kernel modules: budget-av

sudo v4l2-ctl -n
Failed to open /dev/video0: No such file or directory

Is this because that mythtv is running right now???


Have a nice and productive day :-)
/Jones