Author Topic: cant get signal or xmltv  (Read 7810 times)

broadleon

  • Regular Poster
  • **
  • Posts: 20
    • View Profile
cant get signal or xmltv
« on: September 17, 2009, 06:42:33 pm »
Hi all

Im mystfied, ive tried pvr-150 i get no analog signal just a fuzzy screen and using the s-video for my sky box i get snow on my sky picture! have i done something wrong?

Ive tried hvr-1300 i get no sound s-video is the same picture with snow from sky box and no signal on television however it adds 82 channels when scanning

xmltv doesn't work there's no listings, when i run mythfilldatabase i get a error code 65280.

i have a hvr-1100 but cant find a solution to getting it recongised on mythtv

I'm using 0710rc2

any ideas?

Many Thanks for anyone that can help
« Last Edit: September 17, 2009, 09:57:23 pm by broadleon »

broadleon

  • Regular Poster
  • **
  • Posts: 20
    • View Profile
Re: cant get signal or xmltv
« Reply #1 on: September 19, 2009, 10:59:10 am »
Update, 

Ive managed to clean up some of the fuzzy snow that appears on the s-video signal on pvr-150 just by making tweeks in mythtv setup how ever it still not fantastic i have streaks down the pivture and there’s no signal on analog.

Does anyone know how to change myth TV aspect ratio permanently  to 16:9?

Leon



fastie81

  • Veteran
  • ***
  • Posts: 136
  • SSDD
    • View Profile
Re: cant get signal or xmltv
« Reply #2 on: September 19, 2009, 11:02:55 am »
Hi

I have the same problem with my pvr-150
Can you tell me what tweaks you did in myth?
Chris

broadleon

  • Regular Poster
  • **
  • Posts: 20
    • View Profile
Re: cant get signal or xmltv
« Reply #3 on: September 19, 2009, 11:56:18 am »
Hi

I just tried various settings in mythtv general settings on the backend i.e. I use pal but I found pal-n worked better.

However I tried to us 0810 but I couldn’t get past the booting of kbuntu 8.10, my graphics card won’t display correctly, I’m wondering whether my graphics card need replacing?

I found this helped http://www.youtube.com/watch?v=j2D5NvYf1z8

Leon

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: cant get signal or xmltv
« Reply #4 on: September 19, 2009, 01:15:17 pm »
Hi all

Im mystfied, ive tried pvr-150 i get no analog signal just a fuzzy screen and using the s-video for my sky box i get snow on my sky picture! have i done something wrong?

Ive tried hvr-1300 i get no sound s-video is the same picture with snow from sky box and no signal on television however it adds 82 channels when scanning

xmltv doesn't work there's no listings, when i run mythfilldatabase i get a error code 65280.

i have a hvr-1100 but cant find a solution to getting it recongised on mythtv

I'm using 0710rc2

any ideas?

Many Thanks for anyone that can help

LinuxMCE-0710's installation of MythTV is probably causing most of your problems with xmltv and the grabber your using when you run mythfilldatabase. The s-video capture problems you describe are one's we've seen too and to be frank we just use composite capture instead - the quality is very good if configured correctly. The HVR-1100 & HVR-1300 might benefit form updated v4l libs too.

All the best

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

broadleon

  • Regular Poster
  • **
  • Posts: 20
    • View Profile
Re: cant get signal or xmltv
« Reply #5 on: September 19, 2009, 02:28:20 pm »
Quote

LinuxMCE-0710's installation of MythTV is probably causing most of your problems with xmltv and the grabber your using when you run mythfilldatabase. The s-video capture problems you describe are one's we've seen too and to be frank we just use composite capture instead - the quality is very good if configured correctly. The HVR-1100 & HVR-1300 might benefit form updated v4l libs too.

All the best

Andrew

Any sugestions on configuration? im using composite capture now, the picture is better. but still a bit jittery.

Would using lmce 0810 fix all these problems?

Leon

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: cant get signal or xmltv
« Reply #6 on: September 21, 2009, 02:58:48 pm »
Quote

LinuxMCE-0710's installation of MythTV is probably causing most of your problems with xmltv and the grabber your using when you run mythfilldatabase. The s-video capture problems you describe are one's we've seen too and to be frank we just use composite capture instead - the quality is very good if configured correctly. The HVR-1100 & HVR-1300 might benefit form updated v4l libs too.

All the best

Andrew

Any sugestions on configuration? im using composite capture now, the picture is better. but still a bit jittery.

Would using lmce 0810 fix all these problems?

Leon

The jitter might be caused by a small misconfiguration on the HVR-1300 or PVR-150 - what settings are you currently using for the capture on these two cards? Going to MythTV 0.21 should fix your xmltv issues - so 0810 would probably help you in that respect (we have revved our Dianemo/Cascade system to MythTV 0.21 and are using xmltv/mythfilldatabase reliably),

All the best

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

broadleon

  • Regular Poster
  • **
  • Posts: 20
    • View Profile
Re: cant get signal or xmltv
« Reply #7 on: September 22, 2009, 09:10:10 pm »
Im moving to 0810, Well trying!

In my previous post i said i was trying to install kubuntu 8.10 but failed at the first hurdle.

I was right my graphics card inno3d 7300 series was no good for kubuntu 8.10, so i got Asus en 9400gt that worked ok.
 Had to install kubuntu 8.10 in safe graphics mode, apt-get update, then system reboot then install the recomended nvidia driver that work ok i couldnt see the font that well but i managed to enlarge fonts

I used the wiki on building 0810 from source however that didn't go so smooth  i keep getting stuck on  something like      (svn branches/linuxmce_build0810 (locked)  of the top of head i cant renember exactly what it was) when doing ./build.sh from source code,   

I will repost if i end up going back to 0710

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: cant get signal or xmltv
« Reply #8 on: September 22, 2009, 10:23:52 pm »
Im moving to 0810, Well trying!

In my previous post i said i was trying to install kubuntu 8.10 but failed at the first hurdle.

I was right my graphics card inno3d 7300 series was no good for kubuntu 8.10, so i got Asus en 9400gt that worked ok.
 Had to install kubuntu 8.10 in safe graphics mode, apt-get update, then system reboot then install the recomended nvidia driver that work ok i couldnt see the font that well but i managed to enlarge fonts

I used the wiki on building 0810 from source however that didn't go so smooth  i keep getting stuck on  something like      (svn branches/linuxmce_build0810 (locked)  of the top of head i cant renember exactly what it was) when doing ./build.sh from source code,   

I will repost if i end up going back to 0710

My question was referring to how your capture cards are being setup... what settings are you using for these?

All the best

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

broadleon

  • Regular Poster
  • **
  • Posts: 20
    • View Profile
Re: cant get signal or xmltv
« Reply #9 on: September 23, 2009, 12:51:49 am »
ive wiped the hard drive and im trying out 0810 so sorry cant answer question unless i end up going back to 0710

Regards

Leon

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: cant get signal or xmltv
« Reply #10 on: September 23, 2009, 02:09:35 am »
ive wiped the hard drive and im trying out 0810 so sorry cant answer question unless i end up going back to 0710

Regards

Leon

Well the same setup for capture cards in MythTV will be needed so let me know what settings your using when you get back up and running on 0810.

All the best

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

broadleon

  • Regular Poster
  • **
  • Posts: 20
    • View Profile
Re: cant get signal or xmltv
« Reply #11 on: September 23, 2009, 08:43:45 pm »
HI

Perhaps Andrew you can help me I have brought a asus 9400gt but I’m Stuck, I installed kubuntu 8.10 that was ok except it was in safe graphics mode, so run the updates, rebooted the machine, installed the recommended 177 NVIDIA driver, resized screen, increased the size of fonts slightly so I read the small text on screen,

Followed this guide  http://wiki.linuxmce.org/index.php/LinuxMCE-0810_alpha2  went fine no problems. Until!! I found that the screen size went back to small not wide screen and the ui is1.

So I clicked on the video res and sound button, system reboots, but no av wizard so I tried this  http://wiki.linuxmce.org/index.php/AVWizard  didn’t work!

I read a post about changing settings on the core so i log in on the home page and changed graphics card to NVIDIA and the box underneath I set to opengl.

That’s made matters worse now on reboot I get a <you>@dcerouter:~$ and that’s it I tried startx command and all I get is something about xorg not working properly! I can only assume this means that I have the wrong driver installed for my system.

So I tried this http://forum.linuxmce.org/index.php?topic=8460.0 sorry didn’t work I typed telinit 1 in sudo and system goes back to kubuntu loading up bar and it sticks that way

And this http://wiki.linuxmce.com/index.php/Display_Drivers same as above

I feel that I’m banging my head up a wall!

Many Thanks Leon

JDFire

  • Regular Poster
  • **
  • Posts: 18
    • View Profile
Re: cant get signal or xmltv
« Reply #12 on: September 23, 2009, 09:25:54 pm »
What is the error message your are getting when you try to boot? I might have a fix but need to see the error first.

broadleon

  • Regular Poster
  • **
  • Posts: 20
    • View Profile
Re: cant get signal or xmltv
« Reply #13 on: September 23, 2009, 09:42:53 pm »
I dont get a error message when i try to boot it just boots to <you>@dcerouter:~$ do you want the error message that i get when i type startx?

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: cant get signal or xmltv
« Reply #14 on: September 23, 2009, 11:29:21 pm »
HI

Perhaps Andrew you can help me I have brought a asus 9400gt but I’m Stuck, I installed kubuntu 8.10 that was ok except it was in safe graphics mode, so run the updates, rebooted the machine, installed the recommended 177 NVIDIA driver, resized screen, increased the size of fonts slightly so I read the small text on screen,

Followed this guide  http://wiki.linuxmce.org/index.php/LinuxMCE-0810_alpha2  went fine no problems. Until!! I found that the screen size went back to small not wide screen and the ui is1.

So I clicked on the video res and sound button, system reboots, but no av wizard so I tried this  http://wiki.linuxmce.org/index.php/AVWizard  didn’t work!

I read a post about changing settings on the core so i log in on the home page and changed graphics card to NVIDIA and the box underneath I set to opengl.

That’s made matters worse now on reboot I get a <you>@dcerouter:~$ and that’s it I tried startx command and all I get is something about xorg not working properly! I can only assume this means that I have the wrong driver installed for my system.

So I tried this http://forum.linuxmce.org/index.php?topic=8460.0 sorry didn’t work I typed telinit 1 in sudo and system goes back to kubuntu loading up bar and it sticks that way

And this http://wiki.linuxmce.com/index.php/Display_Drivers same as above

I feel that I’m banging my head up a wall!

Many Thanks Leon


Well we use the 180.60 nVidia driver or later for the 9400 card or Ion based machines. I would suggest upgrading to that version or later at the very least.

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk