Author Topic: Supporting the ACT Solutions ZCU201 USB Z-wave Interface (Read 143465 times)

totallymaxed · « **Reply #135 on:** February 09, 2008, 03:11:31 am »

Quote from: hari on February 08, 2008, 05:46:50 pm

greg did further improvements to the driver and it will be in the vanilla kernel soon:
http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/patches/usb/usb-add-usb-serial-spcp8x5-driver.patch

best regards,
Hari

Great :-)

hari · « **Reply #136 on:** February 10, 2008, 10:30:44 am »

Quote from: ddamron on February 09, 2008, 01:27:33 am

Hari, You're a kernel hacker now!

yes, it was a hack

Greg did some improvements.

btw, i put the changes from Greg in the trunk on charonmedia and did a tutorial for the Wiki:

http://wiki.linuxmce.org/index.php/SPCP8x5_Driver_Installation
http://wiki.linuxmce.org/index.php/ZWave_DeviceTemplate_PlugAndPlay

best regards,
Hari

totallymaxed · « **Reply #137 on:** February 10, 2008, 06:46:25 pm »

Quote from: hari on February 10, 2008, 10:30:44 am

Quote from: ddamron on February 09, 2008, 01:27:33 am
Hari, You're a kernel hacker now!
yes, it was a hack
Greg did some improvements.

btw, i put the changes from Greg in the trunk on charonmedia and did a tutorial for the Wiki:

http://wiki.linuxmce.org/index.php/SPCP8x5_Driver_Installation
http://wiki.linuxmce.org/index.php/ZWave_DeviceTemplate_PlugAndPlay

best regards,
Hari

Nice work Hari ;-)

Andrew

Zaerc · « **Reply #138 on:** February 12, 2008, 01:26:31 am »

Hack or not, congratulations on a job well done Hari.

hari · « **Reply #139 on:** February 12, 2008, 08:59:01 am »

thanks, you are welcome

best regards,
Hari

uplink · « **Reply #140 on:** February 18, 2008, 12:05:57 pm »

Quote from: hari on February 06, 2008, 09:53:55 am

could you please provide the error output and information from the logfile?

I updated the driver with the latest sources just now and ran the ZWave device. I can't attach the log to this post (forum gives an error when I attempt to do so), so I'm posting it inline.

ZWave log

Quote

ZWave, v.2.0.0.44.0802052200
Visit www.plutohome.com for source code and license information

10   02/18/08 2:54:08.910      Device: 63 starting. Connecting to: localhost <0x2b415d9eab40>
10   02/18/08 2:54:08.916      Setting timeout for socket 3 to 20 <0x2b415d9eab40>
10   02/18/08 2:54:08.973      Socket::SendMessage type 5 id 37 from 63 to -1000 <0x2b415d9eab40>
10   02/18/08 2:54:09.069      TranslateSerialUSB found /sys/devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/ttyUSB1/ttyUSB1, returning /dev/ttyUSB1 <0x2b415d9eab40>
36   02/18/08 2:54:09.069      Using serial port: ttyUSB1. <0x2b415d9eab40>
36   02/18/08 2:54:09.081      SerialConnection::connect init serial mutex <0x2b415d9eab40>
36   02/18/08 2:54:09.081      receive thread created OK!!!! <0x2b415d9eab40>
35   02/18/08 2:54:09.081      entry point receiveFunction <0x41001950>
35   02/18/08 2:54:09.291      ++++++++++++ ZWave is connected <0x2b415d9eab40>
36   02/18/08 2:54:09.291      ### Run Current Job <0x41802950>
36   02/18/08 2:54:09.347      SerialConnection::send lock serial mutex <0x41802950>
35   02/18/08 2:54:09.347      SerialConnection::send len = 2 buf = 0x00 0x15 <0x41802950>
36   02/18/08 2:54:09.347      SerialConnection::send unlock serial mutex <0x41802950>
05   02/18/08 2:54:14.023      ### Go to timeout queue <0x41802950>
05   02/18/08 2:54:14.023      ### execute the next job from timeout queue <0x41802950>
05   02/18/08 2:54:14.023      ZWJobInitialize::timeoutHandler <0x41802950>
36   02/18/08 2:54:14.083      SerialConnection::send lock serial mutex <0x41802950>
35   02/18/08 2:54:14.083      SerialConnection::send len = 2 buf = 0x00 0x15 <0x41802950>
36   02/18/08 2:54:14.083      SerialConnection::send unlock serial mutex <0x41802950>
05   02/18/08 2:54:19.031      ### Go to timeout queue <0x41802950>
05   02/18/08 2:54:19.031      ### execute the next job from timeout queue <0x41802950>
05   02/18/08 2:54:19.031      ZWJobInitialize::timeoutHandler <0x41802950>
36   02/18/08 2:54:19.091      SerialConnection::send lock serial mutex <0x41802950>
35   02/18/08 2:54:19.147      SerialConnection::send len = 2 buf = 0x00 0x15 <0x41802950>
36   02/18/08 2:54:19.147      SerialConnection::send unlock serial mutex <0x41802950>
35   02/18/08 2:54:19.499      size too small 1 <0x41802950>
35   02/18/08 2:54:19.559      size too small 1 <0x41802950>
35   02/18/08 2:54:19.615      size too small 1 <0x41802950>
35   02/18/08 2:54:19.675      size too small 1 <0x41802950>
35   02/18/08 2:54:19.735      size too small 1 <0x41802950>
35   02/18/08 2:54:19.795      size too small 1 <0x41802950>
35   02/18/08 2:54:19.855      size too small 1 <0x41802950>
35   02/18/08 2:54:19.915      size too small 1 <0x41802950>
35   02/18/08 2:54:19.971      size too small 1 <0x41802950>
35   02/18/08 2:54:20.027      size too small 1 <0x41802950>
35   02/18/08 2:54:20.087      size too small 1 <0x41802950>
35   02/18/08 2:54:20.147      size too small 1 <0x41802950>
35   02/18/08 2:54:20.203      size too small 1 <0x41802950>
35   02/18/08 2:54:20.263      size too small 1 <0x41802950>
35   02/18/08 2:54:20.319      size too small 1 <0x41802950>
35   02/18/08 2:54:20.379      size too small 1 <0x41802950>
35   02/18/08 2:54:20.435      size too small 1 <0x41802950>
35   02/18/08 2:54:20.495      size too small 1 <0x41802950>
35   02/18/08 2:54:20.555      size too small 1 <0x41802950>
35   02/18/08 2:54:20.611      size too small 1 <0x41802950>
35   02/18/08 2:54:20.667      size too small 1 <0x41802950>
35   02/18/08 2:54:20.723      size too small 1 <0x41802950>
35   02/18/08 2:54:20.783      size too small 1 <0x41802950>
35   02/18/08 2:54:20.843      size too small 1 <0x41802950>
35   02/18/08 2:54:20.903      size too small 1 <0x41802950>
35   02/18/08 2:54:20.963      size too small 1 <0x41802950>
35   02/18/08 2:54:21.023      size too small 1 <0x41802950>
35   02/18/08 2:54:21.083      size too small 1 <0x41802950>
35   02/18/08 2:54:21.143      size too small 1 <0x41802950>
35   02/18/08 2:54:21.203      size too small 1 <0x41802950>
35   02/18/08 2:54:21.263      size too small 1 <0x41802950>
35   02/18/08 2:54:21.323      size too small 1 <0x41802950>
35   02/18/08 2:54:21.383      size too small 1 <0x41802950>
35   02/18/08 2:54:21.439      size too small 1 <0x41802950>
35   02/18/08 2:54:21.495      size too small 1 <0x41802950>
35   02/18/08 2:54:21.551      size too small 1 <0x41802950>
35   02/18/08 2:54:21.607      size too small 1 <0x41802950>
35   02/18/08 2:54:21.667      size too small 1 <0x41802950>
35   02/18/08 2:54:21.723      size too small 1 <0x41802950>
35   02/18/08 2:54:21.779      size too small 1 <0x41802950>
35   02/18/08 2:54:21.835      size too small 1 <0x41802950>
35   02/18/08 2:54:21.891      size too small 1 <0x41802950>
35   02/18/08 2:54:21.951      size too small 1 <0x41802950>
35   02/18/08 2:54:22.007      size too small 1 <0x41802950>
35   02/18/08 2:54:22.063      size too small 1 <0x41802950>
35   02/18/08 2:54:22.119      size too small 1 <0x41802950>
35   02/18/08 2:54:22.175      size too small 1 <0x41802950>
35   02/18/08 2:54:22.231      size too small 1 <0x41802950>
35   02/18/08 2:54:22.287      size too small 1 <0x41802950>
35   02/18/08 2:54:22.347      size too small 1 <0x41802950>
35   02/18/08 2:54:22.407      size too small 1 <0x41802950>
35   02/18/08 2:54:22.467      size too small 1 <0x41802950>
35   02/18/08 2:54:22.527      size too small 1 <0x41802950>
35   02/18/08 2:54:22.587      size too small 1 <0x41802950>
35   02/18/08 2:54:22.647      size too small 1 <0x41802950>
35   02/18/08 2:54:22.703      size too small 1 <0x41802950>
35   02/18/08 2:54:22.759      size too small 1 <0x41802950>
35   02/18/08 2:54:22.815      size too small 1 <0x41802950>
35   02/18/08 2:54:22.875      size too small 1 <0x41802950>
35   02/18/08 2:54:22.931      size too small 1 <0x41802950>
35   02/18/08 2:54:22.987      size too small 1 <0x41802950>
35   02/18/08 2:54:23.047      size too small 1 <0x41802950>
35   02/18/08 2:54:23.107      size too small 1 <0x41802950>
35   02/18/08 2:54:23.167      size too small 1 <0x41802950>
35   02/18/08 2:54:23.227      size too small 1 <0x41802950>
35   02/18/08 2:54:23.287      size too small 1 <0x41802950>
35   02/18/08 2:54:23.347      size too small 1 <0x41802950>
35   02/18/08 2:54:23.407      size too small 1 <0x41802950>
35   02/18/08 2:54:23.467      size too small 1 <0x41802950>
35   02/18/08 2:54:23.527      size too small 1 <0x41802950>
35   02/18/08 2:54:23.587      size too small 1 <0x41802950>
35   02/18/08 2:54:23.647      size too small 1 <0x41802950>
35   02/18/08 2:54:23.707      size too small 1 <0x41802950>
35   02/18/08 2:54:23.767      size too small 1 <0x41802950>
35   02/18/08 2:54:23.827      size too small 1 <0x41802950>
35   02/18/08 2:54:23.887      size too small 1 <0x41802950>
35   02/18/08 2:54:23.947      size too small 1 <0x41802950>
35   02/18/08 2:54:24.007      size too small 1 <0x41802950>
05   02/18/08 2:54:24.007      ### Go to timeout queue <0x41802950>
05   02/18/08 2:54:24.007      ### skip the next job from timeout queue <0x41802950>
35   02/18/08 2:54:24.007      ----- INIT ---- 1 <0x41802950>
35   02/18/08 2:54:24.007      ----- INIT ---- 2 <0x41802950>
35   02/18/08 2:54:24.067      -------- 3 <0x2b415d9eab40>
35   02/18/08 2:54:24.067      SerialConnection ------------- asa 1 <0x2b415d9eab40>
35   02/18/08 2:54:24.219      SerialConnection ------------- asa 2 <0x2b415d9eab40>
36   02/18/08 2:54:24.219      waiting for thread to finish <0x2b415d9eab40>
35   02/18/08 2:54:24.319      exit receiveFunction : nr. of reads 49 <0x41001950>
36   02/18/08 2:54:24.319      thread finished <0x2b415d9eab40>
35   02/18/08 2:54:24.320      SerialConnection ------------- asa 3 <0x2b415d9eab40>
35   02/18/08 2:54:24.320      SerialConnection ------------- asa 4 <0x2b415d9eab40>
35   02/18/08 2:54:24.320      -------- 4 <0x2b415d9eab40>
10   02/18/08 2:54:24.320      Socket::SendMessage type 5 id 37 from 63 to -1000 <0x2b415d9eab40>
10   02/18/08 2:54:24.365      TranslateSerialUSB found /sys/devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/ttyUSB1/ttyUSB1, returning /dev/ttyUSB1 <0x2b415d9eab40>
36   02/18/08 2:54:24.365      Using serial port: ttyUSB1. <0x2b415d9eab40>
36   02/18/08 2:54:24.376      SerialConnection::connect init serial mutex <0x2b415d9eab40>
36   02/18/08 2:54:24.376      receive thread created OK!!!! <0x2b415d9eab40>
35   02/18/08 2:54:24.376      entry point receiveFunction <0x40800950>
35   02/18/08 2:54:24.588      ++++++++++++ ZWave is connected <0x2b415d9eab40>
36   02/18/08 2:54:24.595      ### Run Current Job <0x41802950>
36   02/18/08 2:54:24.655      SerialConnection::send lock serial mutex <0x41802950>
35   02/18/08 2:54:24.655      SerialConnection::send len = 2 buf = 0x00 0x15 <0x41802950>
36   02/18/08 2:54:24.655      SerialConnection::send unlock serial mutex <0x41802950>
05   02/18/08 2:54:29.011      ### Go to timeout queue <0x41802950>
05   02/18/08 2:54:29.011      ### execute the next job from timeout queue <0x41802950>
05   02/18/08 2:54:29.011      ZWJobInitialize::timeoutHandler <0x41802950>
36   02/18/08 2:54:29.067      SerialConnection::send lock serial mutex <0x41802950>
35   02/18/08 2:54:29.151      SerialConnection::send len = 2 buf = 0x00 0x15 <0x41802950>
36   02/18/08 2:54:29.151      SerialConnection::send unlock serial mutex <0x41802950>
05   02/18/08 2:54:34.023      ### Go to timeout queue <0x41802950>
05   02/18/08 2:54:34.023      ### execute the next job from timeout queue <0x41802950>
05   02/18/08 2:54:34.023      ZWJobInitialize::timeoutHandler <0x41802950>
36   02/18/08 2:54:34.082      SerialConnection::send lock serial mutex <0x41802950>
35   02/18/08 2:54:34.123      SerialConnection::send len = 2 buf = 0x00 0x15 <0x41802950>
36   02/18/08 2:54:34.123      SerialConnection::send unlock serial mutex <0x41802950>
35   02/18/08 2:54:34.479      size too small 1 <0x41802950>
35   02/18/08 2:54:34.538      size too small 1 <0x41802950>
35   02/18/08 2:54:34.598      size too small 1 <0x41802950>
35   02/18/08 2:54:34.658      size too small 1 <0x41802950>
35   02/18/08 2:54:34.714      size too small 1 <0x41802950>
35   02/18/08 2:54:34.774      size too small 1 <0x41802950>
35   02/18/08 2:54:34.835      size too small 1 <0x41802950>
35   02/18/08 2:54:34.895      size too small 1 <0x41802950>
35   02/18/08 2:54:34.951      size too small 1 <0x41802950>
35   02/18/08 2:54:35.007      size too small 1 <0x41802950>
35   02/18/08 2:54:35.066      size too small 1 <0x41802950>
35   02/18/08 2:54:35.126      size too small 1 <0x41802950>
35   02/18/08 2:54:35.187      size too small 1 <0x41802950>
35   02/18/08 2:54:35.247      size too small 1 <0x41802950>
35   02/18/08 2:54:35.306      size too small 1 <0x41802950>
35   02/18/08 2:54:35.367      size too small 1 <0x41802950>
35   02/18/08 2:54:35.423      size too small 1 <0x41802950>
35   02/18/08 2:54:35.483      size too small 1 <0x41802950>
35   02/18/08 2:54:35.539      size too small 1 <0x41802950>
35   02/18/08 2:54:35.595      size too small 1 <0x41802950>
35   02/18/08 2:54:35.651      size too small 1 <0x41802950>
35   02/18/08 2:54:35.707      size too small 1 <0x41802950>
35   02/18/08 2:54:35.763      size too small 1 <0x41802950>
35   02/18/08 2:54:35.819      size too small 1 <0x41802950>
35   02/18/08 2:54:35.875      size too small 1 <0x41802950>
35   02/18/08 2:54:35.931      size too small 1 <0x41802950>
35   02/18/08 2:54:35.987      size too small 1 <0x41802950>
35   02/18/08 2:54:36.047      size too small 1 <0x41802950>
35   02/18/08 2:54:36.107      size too small 1 <0x41802950>
35   02/18/08 2:54:36.163      size too small 1 <0x41802950>
35   02/18/08 2:54:36.219      size too small 1 <0x41802950>
35   02/18/08 2:54:36.280      size too small 1 <0x41802950>
35   02/18/08 2:54:36.335      size too small 1 <0x41802950>
35   02/18/08 2:54:36.391      size too small 1 <0x41802950>
35   02/18/08 2:54:36.451      size too small 1 <0x41802950>
35   02/18/08 2:54:36.507      size too small 1 <0x41802950>
35   02/18/08 2:54:36.563      size too small 1 <0x41802950>
35   02/18/08 2:54:36.619      size too small 1 <0x41802950>
35   02/18/08 2:54:36.679      size too small 1 <0x41802950>
35   02/18/08 2:54:36.735      size too small 1 <0x41802950>
35   02/18/08 2:54:36.794      size too small 1 <0x41802950>
35   02/18/08 2:54:36.854      size too small 1 <0x41802950>
35   02/18/08 2:54:36.914      size too small 1 <0x41802950>
35   02/18/08 2:54:36.974      size too small 1 <0x41802950>
35   02/18/08 2:54:37.034      size too small 1 <0x41802950>
35   02/18/08 2:54:37.095      size too small 1 <0x41802950>
35   02/18/08 2:54:37.154      size too small 1 <0x41802950>
35   02/18/08 2:54:37.211      size too small 1 <0x41802950>
35   02/18/08 2:54:37.270      size too small 1 <0x41802950>
35   02/18/08 2:54:37.327      size too small 1 <0x41802950>
35   02/18/08 2:54:37.386      size too small 1 <0x41802950>
35   02/18/08 2:54:37.444      size too small 1 <0x41802950>
35   02/18/08 2:54:37.502      size too small 1 <0x41802950>
35   02/18/08 2:54:37.562      size too small 1 <0x41802950>
35   02/18/08 2:54:37.622      size too small 1 <0x41802950>
35   02/18/08 2:54:37.682      size too small 1 <0x41802950>
35   02/18/08 2:54:37.742      size too small 1 <0x41802950>
35   02/18/08 2:54:37.802      size too small 1 <0x41802950>
35   02/18/08 2:54:37.862      size too small 1 <0x41802950>
35   02/18/08 2:54:37.919      size too small 1 <0x41802950>
35   02/18/08 2:54:37.974      size too small 1 <0x41802950>
35   02/18/08 2:54:38.035      size too small 1 <0x41802950>
35   02/18/08 2:54:38.095      size too small 1 <0x41802950>
35   02/18/08 2:54:38.155      size too small 1 <0x41802950>
35   02/18/08 2:54:38.214      size too small 1 <0x41802950>
35   02/18/08 2:54:38.274      size too small 1 <0x41802950>
35   02/18/08 2:54:38.334      size too small 1 <0x41802950>
35   02/18/08 2:54:38.394      size too small 1 <0x41802950>
35   02/18/08 2:54:38.455      size too small 1 <0x41802950>
35   02/18/08 2:54:38.514      size too small 1 <0x41802950>
35   02/18/08 2:54:38.574      size too small 1 <0x41802950>
35   02/18/08 2:54:38.634      size too small 1 <0x41802950>
35   02/18/08 2:54:38.691      size too small 1 <0x41802950>
35   02/18/08 2:54:38.750      size too small 1 <0x41802950>
35   02/18/08 2:54:38.811      size too small 1 <0x41802950>
35   02/18/08 2:54:38.870      size too small 1 <0x41802950>
35   02/18/08 2:54:38.930      size too small 1 <0x41802950>
35   02/18/08 2:54:38.987      size too small 1 <0x41802950>
35   02/18/08 2:54:39.046      size too small 1 <0x41802950>
05   02/18/08 2:54:39.047      ### Go to timeout queue <0x41802950>
05   02/18/08 2:54:39.047      ### skip the next job from timeout queue <0x41802950>
35   02/18/08 2:54:39.047      ----- INIT ---- 1 <0x41802950>
35   02/18/08 2:54:39.047      ----- INIT ---- 2 <0x41802950>
05   02/18/08 2:54:39.063      Cannot connect to ZWave device ttyUSB1. <0x2b415d9eab40>
10   02/18/08 2:54:39.063      InternalSendCommand queue id 791 conf -1 resp (nil) <0x2b415d9eab40>
01   02/18/08 2:54:39.063      Connect() Failed <0x2b415d9eab40>
35   02/18/08 2:54:39.063      -------- 3 <0x2b415d9eab40>
35   02/18/08 2:54:39.063      SerialConnection ------------- asa 1 <0x2b415d9eab40>
35   02/18/08 2:54:39.195      SerialConnection ------------- asa 2 <0x2b415d9eab40>
36   02/18/08 2:54:39.195      waiting for thread to finish <0x2b415d9eab40>
35   02/18/08 2:54:39.295      exit receiveFunction : nr. of reads 48 <0x40800950>
36   02/18/08 2:54:39.295      thread finished <0x2b415d9eab40>
35   02/18/08 2:54:39.295      SerialConnection ------------- asa 3 <0x2b415d9eab40>
35   02/18/08 2:54:39.295      SerialConnection ------------- asa 4 <0x2b415d9eab40>
35   02/18/08 2:54:39.295      -------- 4 <0x2b415d9eab40>
35   02/18/08 2:54:39.567      SerialConnection ------------- 3 <0x2b415d9eab40>
35   02/18/08 2:54:39.567      SerialConnection --- destructor <0x2b415d9eab40>
35   02/18/08 2:54:39.567      SerialConnection ------------- 4 <0x2b415d9eab40>
10   02/18/08 2:54:39.567      Waiting for message queue thread to quit <0x2b415d9eab40>
10   02/18/08 2:54:39.567      Socket m_Socket -1/0x6673c0 Command_Impl1 Dev #63 m_bQuit=1 <0x2b415d9eab40>
10   02/18/08 2:54:39.567      Socket m_Socket -1/0x6673c0 Command_Impl1 Dev #63 m_bQuit=1 <0x2b415d9eab40>
13   02/18/08 2:54:39.567      Socket::Close() m_Socket 3 <0x2b415d9eab40>
13   02/18/08 2:54:39.567      Socket::Close() m_Socket 3 closesocket: 0 <0x2b415d9eab40>
13   02/18/08 2:54:39.567      Socket::Close() m_Socket 4 <0x2b415d9eab40>
13   02/18/08 2:54:39.567      Socket::Close() m_Socket 4 closesocket: 0 <0x2b415d9eab40>
10   02/18/08 2:54:39.567      Message queue thread quit <0x2b415d9eab40>
10   02/18/08 2:54:39.567      Message queue thread joined <0x2b415d9eab40>
10   02/18/08 2:54:39.567      About to call kill spawned devices <0x2b415d9eab40>
10   02/18/08 2:54:39.567      Need to kill 0 child devices <0x2b415d9eab40>
10   02/18/08 2:54:39.567      Killing completed. <0x2b415d9eab40>
13   02/18/08 2:54:39.570      Socket::~Socket(): deleting socket @0x67b640 Event Dev #63 (socket id in destructor: m_Socket: -1) <0x2b415d9eab40>
13   02/18/08 2:54:39.570      Socket::~Socket(): deleting socket @0x689ea0 Event Dev #63 (socket id in destructor: m_Socket: -1) <0x2b415d9eab40>
10   02/18/08 2:54:39.570      ~Command_Impl finished <0x2b415d9eab40>
13   02/18/08 2:54:39.570      ~HandleRequestSocket 0x6673c0 device: 63 ip: 127.0.0.1 <0x2b415d9eab40>
13   02/18/08 2:54:39.570      RequestSocket::Disconnect 0x6673c0 device: 63 <0x2b415d9eab40>
13   02/18/08 2:54:39.570      Socket::~Socket(): deleting socket @0x6673c0 Command_Impl1 Dev #63 (socket id in destructor: m_Socket: -1) <0x2b415d9eab40>
10   02/18/08 2:54:39.570      Device: 63 ending <0x2b415d9eab40>

Other relevant information:

dmesg

Code: [Select]

[16684.922194] spcp8x5 4-1:1.0: SPCP8x5 converter detected
[16684.968406] usb 4-1: SPCP8x5 converter now attached to ttyUSB1
[16684.968880] usbcore: registered new interface driver spcp8x5
[16684.968886] /home/R/spcp8x5/spcp8x5.c: SPCP8x5 USB to serial adaptor driver v0.04

lsusb

Code: [Select]

Bus 004 Device 002: ID 04fc:0201 Sunplus Technology Co., Ltd

hari · « **Reply #141 on:** February 18, 2008, 12:59:04 pm »

Quote from: uplink on February 18, 2008, 12:05:57 pm

...

could you please try again with revision 1494 of the spcp8x5 driver fro m charonmedia?

Can you enable remote access for me?

best regards,
Hari

uplink · « **Reply #142 on:** February 18, 2008, 02:51:35 pm »

Quote from: hari on February 18, 2008, 12:59:04 pm

Quote from: uplink on February 18, 2008, 12:05:57 pm
...
could you please try again with revision 1494 of the spcp8x5 driver fro m charonmedia?

Can you enable remote access for me?

I sent you the details in a private message.

itspac · « **Reply #143 on:** March 06, 2008, 04:54:00 am »

I get this error in 710 b3 amd64. I am using the Intermatic HA22

[12912.030504] /drivers/spcp8x5/spcp8x5.c: Set UART format 0x30b failed (error = -32)
[12913.195497] printk: 248 messages suppressed.
[12913.195503] rtc: lost some interrupts at 1024Hz.

Quote

ZWave, v.2.0.0.44.0801142200
Visit www.plutohome.com for source code and license information

10 03/06/08 10:14:22.078 Device: 37 starting. Connecting to: dcerouter <0x2ab972316b40>
10 03/06/08 10:14:22.080 Setting timeout for socket 3 to 20 <0x2ab972316b40>
10 03/06/08 10:14:22.173 Socket::SendMessage type 5 id 37 from 37 to -1000 <0x2ab972316b40>
10 03/06/08 10:14:22.221 TranslateSerialUSB found lrwxrwxrwx 1 root root 0 2008-03-05 22:36 ttyUSB0 -> ../../../devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/ttyUSB0, returning /dev/ttyUSB0 <0x2ab972316b40>
36 03/06/08 10:14:22.221 Using serial port: ttyUSB0. <0x2ab972316b40>
36 03/06/08 10:14:22.238 SerialConnection::connect init serial mutex <0x2ab972316b40>
36 03/06/08 10:14:22.238 receive thread created OK!!!! <0x2ab972316b40>
35 03/06/08 10:14:22.238 entry point receiveFunction <0x41001950>
35 03/06/08 10:14:22.448 ++++++++++++ ZWave is connected <0x2ab972316b40>
36 03/06/08 10:14:22.449 ### Run Current Job <0x41802950>
36 03/06/08 10:14:22.508 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 10:14:22.509 SerialConnection::send len = 2 buf = 0x00 0x15 <0x41802950>
36 03/06/08 10:14:22.509 SerialConnection::send unlock serial mutex <0x41802950>
05 03/06/08 10:14:27.005 ### Go to timeout queue <0x41802950>
05 03/06/08 10:14:27.005 ### execute the next job from timeout queue <0x41802950>
05 03/06/08 10:14:27.005 ZWJobInitialize::timeoutHandler <0x41802950>
36 03/06/08 10:14:27.064 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 10:14:27.065 SerialConnection::send len = 2 buf = 0x00 0x15 <0x41802950>
36 03/06/08 10:14:27.065 SerialConnection::send unlock serial mutex <0x41802950>
35 03/06/08 10:14:27.424 SerialConnection::hasCommand() popping ACK <0x41802950>
35 03/06/08 10:14:27.425 SerialConnection::hasCommand() front is SOF <0x41802950>
35 03/06/08 10:14:27.425 SerialConnection::hasCommand lock serial mutex <0x41802950>
35 03/06/08 10:14:27.425 SerialConnection::hasCommand wrote ack <0x41802950>
35 03/06/08 10:14:27.425 SerialConnection::hasCommand unlock serial mutex <0x41802950>
35 03/06/08 10:14:27.425 receiveCommand::begin <0x41802950>
35 03/06/08 10:14:27.425 buffer.size()= 18 <0x41802950>
35 03/06/08 10:14:27.425 receiveCommand: eat another command <0x41802950>
35 03/06/08 10:14:27.425 SerialConnection : received command len = 15 buf = 0x01 0x15 0x5a 0x2d 0x57 0x61 0x76 0x65 0x20 0x31 0x2e 0x39 0x31 0x00 0x01 <0x41802950>
35 03/06/08 10:14:27.425 ZWJobInitialize len = 15 buf = 0x01 0x15 0x5a 0x2d 0x57 0x61 0x76 0x65 0x20 0x31 0x2e 0x39 0x31 0x00 0x01 <0x41802950>
35 03/06/08 10:14:27.425 ZWJobGetVersion len = 15 buf = 0x01 0x15 0x5a 0x2d 0x57 0x61 0x76 0x65 0x20 0x31 0x2e 0x39 0x31 0x00 0x01 <0x41802950>
35 03/06/08 10:14:27.425 Z-Wave 1.91 <0x41802950>
36 03/06/08 10:14:27.484 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 10:14:27.485 SerialConnection::send len = 2 buf = 0x00 0x20 <0x41802950>
36 03/06/08 10:14:27.485 SerialConnection::send unlock serial mutex <0x41802950>
35 03/06/08 10:14:27.720 SerialConnection::hasCommand() popping ACK <0x41802950>
35 03/06/08 10:14:27.721 SerialConnection::hasCommand() front is SOF <0x41802950>
35 03/06/08 10:14:27.721 SerialConnection::hasCommand lock serial mutex <0x41802950>
35 03/06/08 10:14:27.721 SerialConnection::hasCommand wrote ack <0x41802950>
35 03/06/08 10:14:27.721 SerialConnection::hasCommand unlock serial mutex <0x41802950>
35 03/06/08 10:14:27.721 receiveCommand::begin <0x41802950>
35 03/06/08 10:14:27.721 buffer.size()= 10 <0x41802950>
35 03/06/08 10:14:27.721 receiveCommand: eat another command <0x41802950>
35 03/06/08 10:14:27.721 SerialConnection : received command len = 7 buf = 0x01 0x20 0x01 0x32 0x19 0x0c 0x01 <0x41802950>
35 03/06/08 10:14:27.721 ZWJobInitialize len = 7 buf = 0x01 0x20 0x01 0x32 0x19 0x0c 0x01 <0x41802950>
35 03/06/08 10:14:27.721 ZWJobGetID len = 7 buf = 0x01 0x20 0x01 0x32 0x19 0x0c 0x01 <0x41802950>
36 03/06/08 10:14:27.780 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 10:14:27.781 SerialConnection::send len = 2 buf = 0x00 0x02 <0x41802950>
36 03/06/08 10:14:27.781 SerialConnection::send unlock serial mutex <0x41802950>
35 03/06/08 10:14:28.021 SerialConnection::hasCommand() popping ACK <0x41802950>
35 03/06/08 10:14:28.021 SerialConnection::hasCommand() front is SOF <0x41802950>
35 03/06/08 10:14:28.021 SerialConnection::hasCommand lock serial mutex <0x41802950>
35 03/06/08 10:14:28.021 SerialConnection::hasCommand wrote ack <0x41802950>
35 03/06/08 10:14:28.021 SerialConnection::hasCommand unlock serial mutex <0x41802950>
35 03/06/08 10:14:28.021 receiveCommand::begin <0x41802950>
35 03/06/08 10:14:28.021 buffer.size()= 39 <0x41802950>
35 03/06/08 10:14:28.021 receiveCommand: eat another command <0x41802950>
35 03/06/08 10:14:28.021 SerialConnection : received command len = 36 buf = 0x01 0x02 0x04 0x00 0x1d 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x02 <0x41802950>
35 03/06/08 10:14:28.021 ZWJobInitialize len = 36 buf = 0x01 0x02 0x04 0x00 0x1d 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x02 <0x41802950>
35 03/06/08 10:14:28.021 ZWJobGetInitData len = 36 buf = 0x01 0x02 0x04 0x00 0x1d 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x02 <0x41802950>
36 03/06/08 10:14:28.081 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 10:14:28.081 SerialConnection::send len = 3 buf = 0x00 0x52 0x01 <0x41802950>
36 03/06/08 10:14:28.081 SerialConnection::send unlock serial mutex <0x41802950>
35 03/06/08 10:14:28.381 SerialConnection::hasCommand() popping ACK <0x41802950>
35 03/06/08 10:14:28.381 SerialConnection::hasCommand() front is SOF <0x41802950>
35 03/06/08 10:14:28.381 SerialConnection::hasCommand lock serial mutex <0x41802950>
35 03/06/08 10:14:28.381 SerialConnection::hasCommand wrote ack <0x41802950>
35 03/06/08 10:14:28.381 SerialConnection::hasCommand unlock serial mutex <0x41802950>
35 03/06/08 10:14:28.381 receiveCommand::begin <0x41802950>
35 03/06/08 10:14:28.381 buffer.size()= 6 <0x41802950>
35 03/06/08 10:14:28.381 receiveCommand: eat another command <0x41802950>
35 03/06/08 10:14:28.381 SerialConnection : received command len = 3 buf = 0x01 0x52 0x01 <0x41802950>
35 03/06/08 10:14:28.381 ZWJobInitialize len = 3 buf = 0x01 0x52 0x01 <0x41802950>
35 03/06/08 10:14:28.381 ZWJobGetSUC len = 3 buf = 0x01 0x52 0x01 <0x41802950>
36 03/06/08 10:14:28.441 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 10:14:28.441 SerialConnection::send len = 2 buf = 0x00 0x56 <0x41802950>
36 03/06/08 10:14:28.441 SerialConnection::send unlock serial mutex <0x41802950>
35 03/06/08 10:14:28.681 SerialConnection::hasCommand() popping ACK <0x41802950>
35 03/06/08 10:14:28.681 SerialConnection::hasCommand() front is SOF <0x41802950>
35 03/06/08 10:14:28.681 SerialConnection::hasCommand lock serial mutex <0x41802950>
35 03/06/08 10:14:28.681 SerialConnection::hasCommand wrote ack <0x41802950>
35 03/06/08 10:14:28.681 SerialConnection::hasCommand unlock serial mutex <0x41802950>
35 03/06/08 10:14:28.681 receiveCommand::begin <0x41802950>
35 03/06/08 10:14:28.681 buffer.size()= 6 <0x41802950>
35 03/06/08 10:14:28.681 receiveCommand: eat another command <0x41802950>
35 03/06/08 10:14:28.681 SerialConnection : received command len = 3 buf = 0x01 0x56 0x00 <0x41802950>
35 03/06/08 10:14:28.681 ZWJobInitialize len = 3 buf = 0x01 0x56 0x00 <0x41802950>
35 03/06/08 10:14:28.681 ZWJobGetSUC len = 3 buf = 0x01 0x56 0x00 <0x41802950>
36 03/06/08 10:14:28.737 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 10:14:28.737 SerialConnection::send len = 3 buf = 0x00 0x41 0x01 <0x41802950>
36 03/06/08 10:14:28.737 SerialConnection::send unlock serial mutex <0x41802950>
35 03/06/08 10:14:28.973 SerialConnection::hasCommand() popping ACK <0x41802950>
35 03/06/08 10:14:28.973 SerialConnection::hasCommand() front is SOF <0x41802950>
35 03/06/08 10:14:28.973 SerialConnection::hasCommand lock serial mutex <0x41802950>
35 03/06/08 10:14:28.973 SerialConnection::hasCommand wrote ack <0x41802950>
35 03/06/08 10:14:28.973 SerialConnection::hasCommand unlock serial mutex <0x41802950>
35 03/06/08 10:14:28.973 receiveCommand::begin <0x41802950>
35 03/06/08 10:14:28.973 buffer.size()= 11 <0x41802950>
35 03/06/08 10:14:28.973 receiveCommand: eat another command <0x41802950>
35 03/06/08 10:14:28.973 SerialConnection : received command len = 8 buf = 0x01 0x41 0xca 0x06 0x00 0x02 0x02 0x01 <0x41802950>
35 03/06/08 10:14:28.973 ZWJobInitialize len = 8 buf = 0x01 0x41 0xca 0x06 0x00 0x02 0x02 0x01 <0x41802950>
35 03/06/08 10:14:28.973 ZWJobGetNodeProtocolInfo len = 8 buf = 0x01 0x41 0xca 0x06 0x00 0x02 0x02 0x01 <0x41802950>
35 03/06/08 10:14:28.973 ----- INIT ---- 3 <0x41802950>
35 03/06/08 10:14:28.973 ----- INIT ---- 1 <0x41802950>
35 03/06/08 10:14:28.973 ----- INIT ---- 2 <0x41802950>
36 03/06/08 10:14:28.973 ## Current Job Finished --- Left = 0 <0x41802950>
36 03/06/08 10:14:28.981 ZWave::ReportChildDevices trying to get list of devices <0x42003950>
36 03/06/08 10:14:28.981 ZWave::ReportChildDevices got: <0x42003950>
36 03/06/08 10:14:28.981 <0x42003950>
10 03/06/08 10:14:28.981 Socket::SendMessage type 2 id 54 from 37 to -1001 <0x42003950>
10 03/06/08 10:14:28.982 Connect OK <0x2ab972316b40>
05 03/06/08 10:14:28.982 Creating child 38 <0x2ab972316b40>
10 03/06/08 10:14:28.983 Got CreateEvent for unknown type 1820. <0x2ab972316b40>
05 03/06/08 10:14:28.983 Note: Device manager has attached a device of type 1820 that this has no custom event handler for. It will not fire events. <0x2ab972316b40>
10 03/06/08 10:14:28.983 Got CreateCommand for unknown type 1820. <0x2ab972316b40>
05 03/06/08 10:14:28.983 Note: Device manager has attached a device of type 1820 that this has no custom handler for. This is normal for IR. <0x2ab972316b40>
10 03/06/08 10:14:28.983 Requesthandler 0x6670e0 (device: 37) runThread now running <0x43005950>

hari · « **Reply #144 on:** March 06, 2008, 07:21:21 pm »

Quote from: itspac on March 06, 2008, 04:54:00 am

I get this error in 710 b3 amd64. I am using the Intermatic HA22

did you try to download the configuration?

after the first timeout on x00 x15 it looks pretty good..

Danielk22 did some improvements to the serial routines for better frame error handling.

best regards,
Hari

itspac · « **Reply #145 on:** March 06, 2008, 07:45:18 pm »

Quote from: hari on March 06, 2008, 07:21:21 pm

Quote from: itspac on March 06, 2008, 04:54:00 am
I get this error in 710 b3 amd64. I am using the Intermatic HA22
did you try to download the configuration?

after the first timeout on x00 x15 it looks pretty good..

Danielk22 did some improvements to the serial routines for better frame error handling.

best regards,
Hari

Here is from trying to download configuration. The master remote reports "not successful"

Quote

linuxmce@dcerouter:~$ /usr/pluto/bin/ZWave -d 37
ZWave, v.2.0.0.44.0801142200
Visit www.plutohome.com for source code and license information

10 03/06/08 13:41:27.142 Device: 37 starting. Connecting to: dcerouter <0x2b3b039f3b40>
10 03/06/08 13:41:27.145 Setting timeout for socket 3 to 20 <0x2b3b039f3b40>
10 03/06/08 13:41:27.242 Socket::SendMessage type 5 id 37 from 37 to -1000 <0x2b3b039f3b40>
10 03/06/08 13:41:27.345 TranslateSerialUSB found lrwxrwxrwx 1 root root 0 2008-03-06 13:37 ttyUSB0 -> ../../../devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/ttyUSB0, returning /dev/ttyUSB0 <0x2b3b039f3b40>
36 03/06/08 13:41:27.345 Using serial port: ttyUSB0. <0x2b3b039f3b40>
36 03/06/08 13:41:27.367 SerialConnection::connect init serial mutex <0x2b3b039f3b40>
36 03/06/08 13:41:27.367 receive thread created OK!!!! <0x2b3b039f3b40>
35 03/06/08 13:41:27.367 entry point receiveFunction <0x41001950>
35 03/06/08 13:41:27.575 ++++++++++++ ZWave is connected <0x2b3b039f3b40>
36 03/06/08 13:41:27.575 ### Run Current Job <0x41802950>
36 03/06/08 13:41:27.637 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 13:41:27.637 SerialConnection::send len = 2 buf = 0x00 0x15 <0x41802950>
36 03/06/08 13:41:27.637 SerialConnection::send unlock serial mutex <0x41802950>
05 03/06/08 13:41:32.003 ### Go to timeout queue <0x41802950>
05 03/06/08 13:41:32.003 ### execute the next job from timeout queue <0x41802950>
05 03/06/08 13:41:32.003 ZWJobInitialize::timeoutHandler <0x41802950>
36 03/06/08 13:41:32.063 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 13:41:32.063 SerialConnection::send len = 2 buf = 0x00 0x15 <0x41802950>
36 03/06/08 13:41:32.063 SerialConnection::send unlock serial mutex <0x41802950>
35 03/06/08 13:41:32.179 SerialConnection::hasCommand() front is SOF <0x41802950>
35 03/06/08 13:41:32.179 SerialConnection::hasCommand lock serial mutex <0x41802950>
35 03/06/08 13:41:32.179 SerialConnection::hasCommand wrote ack <0x41802950>
35 03/06/08 13:41:32.179 SerialConnection::hasCommand unlock serial mutex <0x41802950>
35 03/06/08 13:41:32.179 receiveCommand::begin <0x41802950>
35 03/06/08 13:41:32.179 buffer.size()= 18 <0x41802950>
35 03/06/08 13:41:32.179 receiveCommand: eat another command <0x41802950>
35 03/06/08 13:41:32.179 SerialConnection : received command len = 15 buf = 0x01 0x15 0x5a 0x2d 0x57 0x61 0x76 0x65 0x20 0x31 0x2e 0x39 0x31 0x00 0x01 <0x41802950>
35 03/06/08 13:41:32.179 ZWJobInitialize len = 15 buf = 0x01 0x15 0x5a 0x2d 0x57 0x61 0x76 0x65 0x20 0x31 0x2e 0x39 0x31 0x00 0x01 <0x41802950>
35 03/06/08 13:41:32.180 ZWJobGetVersion len = 15 buf = 0x01 0x15 0x5a 0x2d 0x57 0x61 0x76 0x65 0x20 0x31 0x2e 0x39 0x31 0x00 0x01 <0x41802950>
35 03/06/08 13:41:32.180 Z-Wave 1.91 <0x41802950>
36 03/06/08 13:41:32.235 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 13:41:32.235 SerialConnection::send len = 2 buf = 0x00 0x20 <0x41802950>
36 03/06/08 13:41:32.235 SerialConnection::send unlock serial mutex <0x41802950>
35 03/06/08 13:41:32.483 SerialConnection::hasCommand() popping ACK <0x41802950>
35 03/06/08 13:41:32.483 SerialConnection::hasCommand() front is SOF <0x41802950>
35 03/06/08 13:41:32.483 SerialConnection::hasCommand lock serial mutex <0x41802950>
35 03/06/08 13:41:32.483 SerialConnection::hasCommand wrote ack <0x41802950>
35 03/06/08 13:41:32.483 SerialConnection::hasCommand unlock serial mutex <0x41802950>
35 03/06/08 13:41:32.483 receiveCommand::begin <0x41802950>
35 03/06/08 13:41:32.483 buffer.size()= 10 <0x41802950>
35 03/06/08 13:41:32.483 receiveCommand: eat another command <0x41802950>
35 03/06/08 13:41:32.483 SerialConnection : received command len = 7 buf = 0x01 0x20 0x01 0x32 0x19 0x0c 0x01 <0x41802950>
35 03/06/08 13:41:32.483 ZWJobInitialize len = 7 buf = 0x01 0x20 0x01 0x32 0x19 0x0c 0x01 <0x41802950>
35 03/06/08 13:41:32.483 ZWJobGetID len = 7 buf = 0x01 0x20 0x01 0x32 0x19 0x0c 0x01 <0x41802950>
36 03/06/08 13:41:32.539 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 13:41:32.539 SerialConnection::send len = 2 buf = 0x00 0x02 <0x41802950>
36 03/06/08 13:41:32.539 SerialConnection::send unlock serial mutex <0x41802950>
35 03/06/08 13:41:32.832 SerialConnection::hasCommand() popping ACK <0x41802950>
35 03/06/08 13:41:32.832 SerialConnection::hasCommand() front is SOF <0x41802950>
35 03/06/08 13:41:32.832 SerialConnection::hasCommand lock serial mutex <0x41802950>
35 03/06/08 13:41:32.832 SerialConnection::hasCommand wrote ack <0x41802950>
35 03/06/08 13:41:32.832 SerialConnection::hasCommand unlock serial mutex <0x41802950>
35 03/06/08 13:41:32.832 receiveCommand::begin <0x41802950>
35 03/06/08 13:41:32.832 buffer.size()= 39 <0x41802950>
35 03/06/08 13:41:32.832 receiveCommand: eat another command <0x41802950>
35 03/06/08 13:41:32.832 SerialConnection : received command len = 36 buf = 0x01 0x02 0x04 0x00 0x1d 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x02 <0x41802950>
35 03/06/08 13:41:32.832 ZWJobInitialize len = 36 buf = 0x01 0x02 0x04 0x00 0x1d 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x02 <0x41802950>
35 03/06/08 13:41:32.832 ZWJobGetInitData len = 36 buf = 0x01 0x02 0x04 0x00 0x1d 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x02 <0x41802950>
36 03/06/08 13:41:32.891 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 13:41:32.891 SerialConnection::send len = 3 buf = 0x00 0x52 0x01 <0x41802950>
36 03/06/08 13:41:32.891 SerialConnection::send unlock serial mutex <0x41802950>
35 03/06/08 13:41:33.120 SerialConnection::hasCommand() popping ACK <0x41802950>
35 03/06/08 13:41:33.120 SerialConnection::hasCommand() front is SOF <0x41802950>
35 03/06/08 13:41:33.120 SerialConnection::hasCommand lock serial mutex <0x41802950>
35 03/06/08 13:41:33.120 SerialConnection::hasCommand wrote ack <0x41802950>
35 03/06/08 13:41:33.120 SerialConnection::hasCommand unlock serial mutex <0x41802950>
35 03/06/08 13:41:33.120 receiveCommand::begin <0x41802950>
35 03/06/08 13:41:33.120 buffer.size()= 6 <0x41802950>
35 03/06/08 13:41:33.120 receiveCommand: eat another command <0x41802950>
35 03/06/08 13:41:33.120 SerialConnection : received command len = 3 buf = 0x01 0x52 0x01 <0x41802950>
35 03/06/08 13:41:33.120 ZWJobInitialize len = 3 buf = 0x01 0x52 0x01 <0x41802950>
35 03/06/08 13:41:33.120 ZWJobGetSUC len = 3 buf = 0x01 0x52 0x01 <0x41802950>
36 03/06/08 13:41:33.175 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 13:41:33.175 SerialConnection::send len = 2 buf = 0x00 0x56 <0x41802950>
36 03/06/08 13:41:33.175 SerialConnection::send unlock serial mutex <0x41802950>
35 03/06/08 13:41:33.464 SerialConnection::hasCommand() popping ACK <0x41802950>
35 03/06/08 13:41:33.464 SerialConnection::hasCommand() front is SOF <0x41802950>
35 03/06/08 13:41:33.464 SerialConnection::hasCommand lock serial mutex <0x41802950>
35 03/06/08 13:41:33.464 SerialConnection::hasCommand wrote ack <0x41802950>
35 03/06/08 13:41:33.464 SerialConnection::hasCommand unlock serial mutex <0x41802950>
35 03/06/08 13:41:33.464 receiveCommand::begin <0x41802950>
35 03/06/08 13:41:33.464 buffer.size()= 6 <0x41802950>
35 03/06/08 13:41:33.464 receiveCommand: eat another command <0x41802950>
35 03/06/08 13:41:33.464 SerialConnection : received command len = 3 buf = 0x01 0x56 0x00 <0x41802950>
35 03/06/08 13:41:33.464 ZWJobInitialize len = 3 buf = 0x01 0x56 0x00 <0x41802950>
35 03/06/08 13:41:33.464 ZWJobGetSUC len = 3 buf = 0x01 0x56 0x00 <0x41802950>
36 03/06/08 13:41:33.519 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 13:41:33.519 SerialConnection::send len = 3 buf = 0x00 0x41 0x01 <0x41802950>
36 03/06/08 13:41:33.519 SerialConnection::send unlock serial mutex <0x41802950>
35 03/06/08 13:41:33.747 SerialConnection::hasCommand() popping ACK <0x41802950>
35 03/06/08 13:41:33.747 SerialConnection::hasCommand() front is SOF <0x41802950>
35 03/06/08 13:41:33.747 SerialConnection::hasCommand lock serial mutex <0x41802950>
35 03/06/08 13:41:33.747 SerialConnection::hasCommand wrote ack <0x41802950>
35 03/06/08 13:41:33.747 SerialConnection::hasCommand unlock serial mutex <0x41802950>
35 03/06/08 13:41:33.747 receiveCommand::begin <0x41802950>
35 03/06/08 13:41:33.747 buffer.size()= 11 <0x41802950>
35 03/06/08 13:41:33.747 receiveCommand: eat another command <0x41802950>
35 03/06/08 13:41:33.747 SerialConnection : received command len = 8 buf = 0x01 0x41 0xca 0x06 0x00 0x02 0x02 0x01 <0x41802950>
35 03/06/08 13:41:33.747 ZWJobInitialize len = 8 buf = 0x01 0x41 0xca 0x06 0x00 0x02 0x02 0x01 <0x41802950>
35 03/06/08 13:41:33.747 ZWJobGetNodeProtocolInfo len = 8 buf = 0x01 0x41 0xca 0x06 0x00 0x02 0x02 0x01 <0x41802950>
35 03/06/08 13:41:33.748 ----- INIT ---- 3 <0x41802950>
35 03/06/08 13:41:33.748 ----- INIT ---- 1 <0x41802950>
35 03/06/08 13:41:33.748 ----- INIT ---- 2 <0x41802950>
36 03/06/08 13:41:33.748 ## Current Job Finished --- Left = 0 <0x41802950>
36 03/06/08 13:41:33.749 ZWave::ReportChildDevices trying to get list of devices <0x42003950>
36 03/06/08 13:41:33.749 ZWave::ReportChildDevices got: <0x42003950>
36 03/06/08 13:41:33.749 <0x42003950>
10 03/06/08 13:41:33.749 Socket::SendMessage type 2 id 54 from 37 to -1001 <0x42003950>
10 03/06/08 13:41:33.750 Connect OK <0x2b3b039f3b40>
05 03/06/08 13:41:33.750 Creating child 38 <0x2b3b039f3b40>
10 03/06/08 13:41:33.750 Got CreateEvent for unknown type 1820. <0x2b3b039f3b40>
05 03/06/08 13:41:33.750 Note: Device manager has attached a device of type 1820 that this has no custom event handler for. It will not fire events. <0x2b3b039f3b40>
10 03/06/08 13:41:33.750 Got CreateCommand for unknown type 1820. <0x2b3b039f3b40>
05 03/06/08 13:41:33.750 Note: Device manager has attached a device of type 1820 that this has no custom handler for. This is normal for IR. <0x2b3b039f3b40>
10 03/06/08 13:41:33.751 Requesthandler 0x6670e0 (device: 37) runThread now running <0x43005950>
10 03/06/08 13:41:49.571 Receive string: MESSAGE 72 <0x43005950>
10 03/06/08 13:41:49.571 Received MESSAGE 72 0x6670e0 device: 37 <0x43005950>
10 03/06/08 13:41:49.571 Received Message type 1 ID 757 from 0 to 37 (device: 37) resp 0 <0x43005950>
36 03/06/08 13:41:49.572 ZWave::DownloadConfiguration trying to get list of devices <0x43806950>
35 03/06/08 13:41:49.572 -------- 3 <0x43806950>
35 03/06/08 13:41:49.572 SerialConnection ------------- asa 1 <0x43806950>
35 03/06/08 13:41:49.771 SerialConnection ------------- asa 2 <0x43806950>
36 03/06/08 13:41:49.772 waiting for thread to finish <0x43806950>
35 03/06/08 13:41:49.867 exit receiveFunction : nr. of reads 72 <0x41001950>
36 03/06/08 13:41:49.868 thread finished <0x43806950>
35 03/06/08 13:41:49.868 SerialConnection ------------- asa 3 <0x43806950>
35 03/06/08 13:41:49.868 SerialConnection ------------- asa 4 <0x43806950>
35 03/06/08 13:41:49.868 -------- 4 <0x43806950>
36 03/06/08 13:41:49.892 SerialConnection::connect init serial mutex <0x43806950>
36 03/06/08 13:41:49.892 receive thread created OK!!!! <0x43806950>
35 03/06/08 13:41:49.892 entry point receiveFunction <0x40800950>
35 03/06/08 13:41:50.099 ++++++++++++ ZWave is connected <0x43806950>
36 03/06/08 13:41:50.103 ### Run Current Job <0x41802950>
36 03/06/08 13:41:50.159 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 13:41:50.159 SerialConnection::send len = 7 buf = 0x00 0x03 0x01 0x02 0x01 0x01 0x21 <0x41802950>
36 03/06/08 13:41:50.159 SerialConnection::send unlock serial mutex <0x41802950>
36 03/06/08 13:41:50.720 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 13:41:50.720 SerialConnection::send len = 3 buf = 0x00 0x42 0x01 <0x41802950>
36 03/06/08 13:41:50.720 SerialConnection::send unlock serial mutex <0x41802950>
35 03/06/08 13:41:54.444 SerialConnection::hasCommand() front is SOF <0x41802950>
35 03/06/08 13:41:54.444 SerialConnection::hasCommand lock serial mutex <0x41802950>
35 03/06/08 13:41:54.444 SerialConnection::hasCommand wrote ack <0x41802950>
35 03/06/08 13:41:54.444 SerialConnection::hasCommand unlock serial mutex <0x41802950>
35 03/06/08 13:41:54.444 receiveCommand::begin <0x41802950>
35 03/06/08 13:41:54.444 buffer.size()= 6 <0x41802950>
35 03/06/08 13:41:54.444 receiveCommand: eat another command <0x41802950>
35 03/06/08 13:41:54.444 SerialConnection : received command len = 3 buf = 0x00 0x42 0x01 <0x41802950>
35 03/06/08 13:41:54.444 ZWJobReset len = 3 buf = 0x00 0x42 0x01 <0x41802950>
36 03/06/08 13:41:54.444 ## Current Job Finished --- Left = 0 <0x41802950>
36 03/06/08 13:41:54.504 ### Run Current Job <0x41802950>
36 03/06/08 13:41:54.563 SerialConnection::send lock serial mutex <0x41802950>
35 03/06/08 13:41:54.564 SerialConnection::send len = 4 buf = 0x00 0x43 0x02 0x02 <0x41802950>
36 03/06/08 13:41:54.564 SerialConnection::send unlock serial mutex <0x41802950>
35 03/06/08 13:41:54.735 SerialConnection::hasCommand() popping ACK <0x41802950>

itspac · « **Reply #146 on:** March 06, 2008, 09:37:59 pm »

well, I did the download to the connecter on a windows machine then installed the HA22 back on the core and I can controll the light, but I was not able to do the download with the configuration with LinuxMCE

1audio · « **Reply #147 on:** March 07, 2008, 05:04:22 am »

I have found that the LMCE ZWave routine for updating the controller is very unreliable. I now use an inexpensive package from Homeseer called the Z-Tool that allows me to directly control the interface module. Its designed to allow the user to setup the system with a laptop and the USB module. No manual controller needed and at $29.95 for the download its cheaper than a remote. http://www.homeseer.com/products/software/Z-Tool.htm
Once the network is in the usb module LMCE seems to read it OK. I have had to reload modules several times because of failures with the LMCE pairing /update routine. If we can get the ZWave software updated to use the "naming class" the whole process will be even nicer.

kengtay · « **Reply #148 on:** May 04, 2008, 03:01:10 pm »

I have myself reload the LinuxMCE at least 10 times, so far I have only get one success to learn from my remote. I have finally use a trial version of Homeseer and learn from remote, then plug my USB remote back to LinuxMCE, it work great!!

hari · « **Reply #149 on:** May 04, 2008, 04:29:53 pm »

the problem with the download configuration is that recent controllers also send group and scene information. As the actual code does not acknowledge that the download fails.

I'm working on a proof of concept now and will start with the rewrite of the ZWave device next weekend.

best regards,
Hari

News:

Author Topic: Supporting the ACT Solutions ZCU201 USB Z-wave Interface (Read 143465 times)

totallymaxed

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface

hari

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface

totallymaxed

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface

Zaerc

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface

hari

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface

uplink

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface

hari

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface

uplink

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface

itspac

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface

hari

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface

itspac

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface

itspac

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface

1audio

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface

kengtay

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface

hari

Re: Supporting the ACT Solutions ZCU201 USB Z-wave Interface