Author Topic: no sound - how to solve this issue?  (Read 4405 times)

fbn

  • Newbie
  • *
  • Posts: 5
    • View Profile
no sound - how to solve this issue?
« on: September 16, 2007, 11:43:34 pm »
Hi,

I'm familar with Linux (Ubuntu/Debian) but new to LinuxMCE. I've installed it on a laptop but I don't get any sound of it. How can I solve this issue?

Thanks,
  Frank

teedge77

  • Addicted
  • *
  • Posts: 591
    • View Profile
Re: no sound - how to solve this issue?
« Reply #1 on: September 17, 2007, 02:40:07 am »
id start by including much more info.
AMD Athlon 64 X2 6000+
Asus M2V Via AM2 ATX
Lite-On LH-20A1S SATA DVD Burner
80GB  SATA-150
EVGA GeForce 7300 GT 512MB DDR2 PCI Express
Sound Blaster Audigy SE
Kingston 2 GB PC6400 DDR2 800MHz
Ultra X-Finity 800-Watt
ZCU000
Cisco 7970
TDM400P

fbn

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: no sound - how to solve this issue?
« Reply #2 on: September 17, 2007, 07:57:16 am »
Hi,

thanks for the reply. What info do you suggest I should include?

The soundcard is a Multimedia audio controller from Intel Corporation 82801CA/CAM AC'97 (rev 02) - that's what lspci says.

Is LinuxMCE supposed to recognize this card or do I have to take care of my own?

Thanks,
  Frank

1audio

  • Addicted
  • *
  • Posts: 552
    • View Profile
Re: no sound - how to solve this issue?
« Reply #3 on: September 17, 2007, 09:16:23 am »
First I would open a console (or ssh in) and run alsamixer. Check that the volume is up and not muted on any output that seems like it should be.
If its not that easy check for alsa support for the particular chipset. You may need to run alsaconfig.

fbn

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: no sound - how to solve this issue?
« Reply #4 on: September 18, 2007, 08:56:09 pm »
Hi,

I've enabled every option in alsamixer to the maximum, nothing is muted any more - still no sound :(

alsaconfig is not installed and there is no package for it (apt-cache search alsaconfig)

Where do you suggest to look for support for my chip with alsa?

teedge77

  • Addicted
  • *
  • Posts: 591
    • View Profile
Re: no sound - how to solve this issue?
« Reply #5 on: September 18, 2007, 09:19:08 pm »
if you look around you could probably find a better one but this might help.

http://www.alsa-project.org/main/index.php/Matrix:Main

ive seen a better compatibility list, but i dont have it saved anywhere and cant remember where i found it.
AMD Athlon 64 X2 6000+
Asus M2V Via AM2 ATX
Lite-On LH-20A1S SATA DVD Burner
80GB  SATA-150
EVGA GeForce 7300 GT 512MB DDR2 PCI Express
Sound Blaster Audigy SE
Kingston 2 GB PC6400 DDR2 800MHz
Ultra X-Finity 800-Watt
ZCU000
Cisco 7970
TDM400P

mikesignguy

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: no sound - how to solve this issue?
« Reply #6 on: November 08, 2007, 10:40:52 pm »
it is strange..

my system shows the modules for chipset are loaded in pluto and in the core ....when i started the system the sound worked
but as soon as i updated the system ... no sound

another problem is that modprobe doesn't seem to work in the core and therefore the new alsa can't be installed.. unless i am doing something wrong

i think it is a bug with the drivers for this card....

Zaerc

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 2256
  • Department of Redundancy Department.
    • View Profile
Re: no sound - how to solve this issue?
« Reply #7 on: November 08, 2007, 11:24:23 pm »
Hi,

thanks for the reply. What info do you suggest I should include?

The soundcard is a Multimedia audio controller from Intel Corporation 82801CA/CAM AC'97 (rev 02) - that's what lspci says.

Is LinuxMCE supposed to recognize this card or do I have to take care of my own?

Thanks,
  Frank

I just checked, my laptop has the exact same chip it seems.  It lost audio once after connecting a USB DVB-T device, but since I was using it as a diskless media director I just deleted the media director and set it up again.  Has worked fine ever since as far as I can tell (haven't tried the DVB-T device again though) so it should be supported out-of-the-box I reckon.

"Change is inevitable. Progress is optional."
-- Anonymous