News:

Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com

Main Menu

Lockup after first reboot

Started by Navy2k, September 13, 2007, 06:02:08 PM

Previous topic - Next topic

Navy2k

Hi,

I installed LMCE 0704 last week with a ATI Card and all went fine ( DVD Version)

This Week i got me an nvidia Card (7600 GS AGP) an my system crashed after the first reboot at a point where the Kubuntu-startup-bar was nerly finished.
Suddenly the picture goes cracy and it looks like an old CRT at too high frequencies.

Anything i could test or is it the wrong card?

Thx Navy

teedge77

you did try booting again right? you said after your first one....was there a second? mines done that before...i also get a weird thing where the keyboard lights flash ....but nothing loads....i just restart and its fine.
AMD Athlon 64 X2 6000+
Asus M2V Via AM2 ATX
Lite-On LH-20A1S SATA DVD Burner
80GB  SATA-150
EVGA GeForce 7300 GT 512MB DDR2 PCI Express
Sound Blaster Audigy SE
Kingston 2 GB PC6400 DDR2 800MHz
Ultra X-Finity 800-Watt
ZCU000
Cisco 7970
TDM400P

scrubadub

try to get to a shell alt-f1 alt-f2 etc. and then check dmesg and your xorg log (get the latest one in /var/log/)

Navy2k

i rebootet a lot after the first one ;) dont helped

xorg.log has one error stating tha glx could not load ant thats true because in the xorg.conf the driver is "vesa"

im not at my box now but i will check dmesg, thx

Navy2k

Ok, it was a compatibilityproblem. I had a strange error like "could not allocate Mem to PCI:0:0:1" directly after the kernel loads from the cd.
I removed my DVS-S Card ( Hauppauge Nova SE2 ) from the system ant it works just perfect. Maybe i ned a newer mainboard to support both at the same time

Navy2k

Ok, solved the Problem.

The Error was " PCI: Failed to allocate mem resource XXXXXXXXXXXX for XXXXXXXXXXX "

Solution: agp aperture size in BIOS to 256MB and all is perfectly fine