Admin Website

[Wikcetman]

I installed a hybrid with only 1 nic.
Is it possible to access the admin website on the external adress ? I tried just putting the http://xxx.xxx.xxx.xxx on another machine the network but to no avail. Am I missing a certain url and/or port ?

Thanks for the help.

[sharlee_angelo]

if you are behind a router, you must forward the http port (80) to LMCE machine private ip.

[Wikcetman]

Both machines are on a local 192.168.1.X domain.
The hybrid did setup a internal 192.168.80.X IP and an external 192.168.1.X.

I'm trying to get the webadmin via the 192.168.1.X one but it times out.

[sharlee_angelo]

from what location are you trying to acces it? from outside your network?

[jerry finn]

You must go to Web Admin (from the hybrid UI->advanced->computing), select the Advanced->Network->Firewall Rules page and add the following ports : 80(http), 22(ssh), 3450(DCERouter), 445(Samba Shares).

[Wikcetman]

That did the trick ! Thanks.

Another similar question, I tried doing a network boot on a third machine.

It found the core and got issued the ip 192.168.80.2.
However it wasn't able to mount the image correctly. I assume this is because the core only has one nic with ip 192.168.1.17 (and 192.168.80.1), i'd probably have to do something funky with the route table ?

[totallymaxed]

That did the trick ! Thanks.

Another similar question, I tried doing a network boot on a third machine.

It found the core and got issued the ip 192.168.80.2.
However it wasn't able to mount the image correctly. I assume this is because the core only has one nic with ip 192.168.1.17 (and 192.168.80.1), i'd probably have to do something funky with the route table ?

You should not have to do anything to the routing table to add a 3rd MD (or any number of additional MD's). However based on the 80.2 address this looks like it is your 1st MD that your adding.

[Wikcetman]

It is indeed, the core is a hybrid. This will be the first MD.
How does the installation differ from a 2nd or 3rd ?