General > Installation issues
AVWizard Problem (Fresh Installation) [solved]
G.I.R.:
edit:
after reinstalling ttf-mscorefonts-installer (apt-get install --reinstall ttf-mscorefonts-installer) the AVWizard appears.
at least in my virtual maschine...oh yeahhh! :)
Hello,
the last "fresh" installation is some time ago and i am getting more RAM and more HD space for my core, so i thought to try a 64bit-installation.
I downloaded kubuntu 14.04.5 and executed the mce-install script.
After finishing i did a reboot.
But after rebooting again i am not able to see the calming screen of the avwizard.
It is stucked with trying to maybe start it and something else.
I tried different nvidia versions as mentioned here in the forum with manipulating nvidia-install.sh but without any success.
I was searching the log files for any hint.
One thing i found, which looks a little bit strange, was this, but i am not really an expert in this and not sure that it is of any relevance :)
AVWizard_Run....log is the first log after running mce-install script:
--- Code: ---==) Log file: "/var/log/Xorg.1.log", Time: Tue Nov 14 16:11:45 2017
(++) Using config file: "/etc/X11/xorg.conf.pluto.avwizard"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Attribute 'SyncToVBlank' (dcerouter:1.0) assigned value 1.
ERROR: Error parsing assignment 'XVideoTextureSyncToVBlank=1' (Unrecognized
attribute name).
ERROR: Error parsing assignment 'XVideoBlitterSyncToVBlank=1' (Unrecognized
attribute name).
Rate 60.0 Hz not available for this size
Unable to open /usr/pluto/wiz_pixmaps/skin.xml
Warning, CounterFontSize not set!
Warning, CounterFontSize not set!
Unknown type of argument parsing argument: --compositor=off
WizardPageWelcome::WizardPageWelcome
WizardPageWelcome::DefaultSetup
Warning: there is no font setup for rendering!
Warning: there is no font setup for rendering!
Warning: there is no font setup for rendering!
--- End code ---
I put the whole log at this place:
http://paste.ubuntu.com/25967676/
My video-card is this:
VGA compatible controller [0300]: NVIDIA Corporation GF119 [GeForce GT 520] [10de:1040]
Kubuntu told me to use nvidia-384.
I divided my harddisk into two partitions. So my old installation (14.04) is running fine with the same hardware.
Does anybody has a helping advice what i can do or have to check?
All the best!
ardirtbiker:
--- Quote from: G.I.R. on November 15, 2017, 04:24:01 pm ---Hello,
the last "fresh" installation is some time ago and i am getting more RAM and more HD space for my core, so i thought to try a 64bit-installation.
I downloaded kubuntu 14.04.5 and executed the mce-install script.
After finishing i did a reboot.
But after rebooting again i am not able to see the calming screen of the avwizard.
It is stucked with trying to maybe start it and something else.
I tried different nvidia versions as mentioned here in the forum with manipulating nvidia-install.sh but without any success.
I was searching the log files for any hint.
One thing i found, which looks a little bit strange, was this, but i am not really an expert in this and not sure that it is of any relevance :)
AVWizard_Run....log is the first log after running mce-install script:
--- Code: ---==) Log file: "/var/log/Xorg.1.log", Time: Tue Nov 14 16:11:45 2017
(++) Using config file: "/etc/X11/xorg.conf.pluto.avwizard"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Attribute 'SyncToVBlank' (dcerouter:1.0) assigned value 1.
ERROR: Error parsing assignment 'XVideoTextureSyncToVBlank=1' (Unrecognized
attribute name).
ERROR: Error parsing assignment 'XVideoBlitterSyncToVBlank=1' (Unrecognized
attribute name).
Rate 60.0 Hz not available for this size
Unable to open /usr/pluto/wiz_pixmaps/skin.xml
Warning, CounterFontSize not set!
Warning, CounterFontSize not set!
Unknown type of argument parsing argument: --compositor=off
WizardPageWelcome::WizardPageWelcome
WizardPageWelcome::DefaultSetup
Warning: there is no font setup for rendering!
Warning: there is no font setup for rendering!
Warning: there is no font setup for rendering!
--- End code ---
I put the whole log at this place:
http://paste.ubuntu.com/25967676/
My video-card is this:
VGA compatible controller [0300]: NVIDIA Corporation GF119 [GeForce GT 520] [10de:1040]
Kubuntu told me to use nvidia-384.
I divided my harddisk into two partitions. So my old installation (14.04) is running fine with the same hardware.
Does anybody has a helping advice what i can do or have to check?
All the best!
--- End quote ---
If you can get to a terminal, run 'dmesg | grep -i nvidia' to determine if the nvidia driver is loading or failing... there might be hints there.
Sent from my SM-G900V using Tapatalk
Kramden:
I am having the same issue with net-install. I get flash of Screen with mouse cursor and flash of black screen and flash of screen with 0 in top corner. I am unable to get to a console. My card is verified to work with nvidia-340. I have done all the driver workarounds in nvidia-install.sh and even removed it. I don't think it is a driver issue but i can't sign into a console because the screen with the 0 becomes a flash of the console too fast to sign into.
ardirtbiker:
--- Quote from: Kramden on November 18, 2017, 11:30:42 pm ---I am having the same issue with net-install. I get flash of Screen with mouse cursor and flash of black screen and flash of screen with 0 in top corner. I am unable to get to a console. My card is verified to work with nvidia-340. I have done all the driver workarounds in nvidia-install.sh and even removed it. I don't think it is a driver issue but i can't sign into a console because the screen with the 0 becomes a flash of the console too fast to sign into.
--- End quote ---
You can boot into recovery mode and investigate if nvidia driver is loading.
Sent from my SM-G900V using Tapatalk
Kramden:
Will be very busy for next few days. I will post when I am able to investigate more.
Navigation
[0] Message Index
[#] Next page
Go to full version