Need some dedicated testers.

[iberium]

Yes,  I have the skins installed on my core and updated them yesterday.  I used the install script from the Web Installer.  I realized that I had to run it from my home directory,  as if i wasn't in my home directory,  then it couldn't locate AudioVisual 1.0 (or something like that),  even though it was calling the full path.

[golgoj4]

Still looking into it. You helped me uncover another bug (since fixed). Will let you know when I have an update.

-langston

[golgoj4]

fixed some .sh mistakes, recommend removing the QOrbiter-Dev directory, regrabbing script and running it.

-Langston

[iberium]

It actually does much less now,  this is what the script gives me when it runs:

01   01/01/14 7:24:38.494      Connection for client socket reported NOT IN THIS INSTALLATION IP=::ffff:192.168.80.188, device -1 last error 3
"07:24:38::Found installation, connecting."
"07:24:38::Connecting to router"
"07:24:38::Starting dce initialization"
"07:24:38::Initialization IP::192.168.80.1"
05   01/01/14 7:24:38.995      void ClientSocket::Disconnect() on this socket: 0xaa002538 (m_Socket: 22)
"07:24:38::Device ID is invalid. Finding Existing Orbiters of this type"
05   01/01/14 7:24:39.005      void ClientSocket::Disconnect() on this socket: 0xaa001c88 (m_Socket: 22)
98 * ::ffff:192.168.80.183 Olga's Samsung Galaxy Orbiter (Living)
170 * ::ffff:192.168.80.188 qOrbiter (Living)
01   01/01/14 7:24:39.005      Bad Device
"07:24:39::Returning List of Orbiters"
showing List
"07:24:39::Bad Device"


I should be using device #170.  It's also loading full screen by default it seems,  but I don't know for sure because it doesn't finish.  I have to alt+tab to get back to console and kill it.  The whole screen goes white and a black box takes up the top left side.  It does let me run it from anywhere now though.

[maverick0815]

Happy new year.
I love what you did with the orbiter. The only thing, that I find a bit hard to adjust to, is the media list....those long bars with the covers are a bit hard on the eyes. Other than that : thumbs up!

[golgoj4]

Happy new year.
I love what you did with the orbiter. The only thing, that I find a bit hard to adjust to, is the media list....those long bars with the covers are a bit hard on the eyes. Other than that : thumbs up!

Thats understood and a known issue. An example of my design failings. BUT i am pretty good at turning a screenshot into reality, so any suggestions (photoshop mockups or otherwise) are welcome.

-Langston

[golgoj4]

It actually does much less now,  this is what the script gives me when it runs:

01   01/01/14 7:24:38.494      Connection for client socket reported NOT IN THIS INSTALLATION IP=::ffff:192.168.80.188, device -1 last error 3
"07:24:38::Found installation, connecting."
"07:24:38::Connecting to router"
"07:24:38::Starting dce initialization"
"07:24:38::Initialization IP::192.168.80.1"
05   01/01/14 7:24:38.995      void ClientSocket::Disconnect() on this socket: 0xaa002538 (m_Socket: 22)
"07:24:38::Device ID is invalid. Finding Existing Orbiters of this type"
05   01/01/14 7:24:39.005      void ClientSocket::Disconnect() on this socket: 0xaa001c88 (m_Socket: 22)
98 * ::ffff:192.168.80.183 Olga's Samsung Galaxy Orbiter (Living)
170 * ::ffff:192.168.80.188 qOrbiter (Living)
01   01/01/14 7:24:39.005      Bad Device
"07:24:39::Returning List of Orbiters"
showing List
"07:24:39::Bad Device"


I should be using device #170.  It's also loading full screen by default it seems,  but I don't know for sure because it doesn't finish.  I have to alt+tab to get back to console and kill it.  The whole screen goes white and a black box takes up the top left side.  It does let me run it from anywhere now though.

1) I would run the installer again so it will update
2) You can bypass the loading screen by editing the config.xml and replacing -1 with your device number. config.xml is located in ~/QOrbiter-Dev
3) the fullscreen thing was probly a bad assumption on my part. I removed it, so when you update it shouldnt happen anymore.

Im familiar with the small black box inside of larger white box. Double check the skins on your core as i've updated a bunch of stuff since yesterday.

Cheers and thanks for working with me on this!
Langston

[maverick0815]

just a question- the TV-controls are not working/present? I can start TV from qorbiter, but not change channels.

[Marie.O]

What PVR are you using?

[maverick0815]

I'm running mythtv

[Marie.O]

What skin are you using?

[maverick0815]

Default skin

[golgoj4]

i shall investigate

[maverick0815]

hmm...curious...I deleted the config.xml on my phone, thinking there was a problem with that one and it will be recreated. As it turns out, it stays at 0 bytes. When I try to set options in qorbiter, it seems they  don't stick. I can put the IP ( by the way, I forgot what webport is needed), devicetype stays a 1. Anyways, when I close that window, it tries to reach the core, but it never uses the IP-Adress. Am I doing something wrong?

[maverick0815]

ok, maybe I'm a bit early with this....I just saw there is a new build (#98). It just produces a screen with a green gradiant...and not much more.