Author Topic: 1004.....squeezebox not working  (Read 13396 times)

mathieu

  • Veteran
  • ***
  • Posts: 57
    • View Profile
1004.....squeezebox not working
« on: January 21, 2012, 07:36:54 am »
Hi All,

Recently I added a squeezebox to the system. It was automatically detected and the procces went as usual. When I used the orbiter to play some music notting happened.
Then in web admin I went to >advanced>configuration>squeezebox server. I noticed the page was empty. Doing a manual install of the package learned that squeezebox server has a replacement, logitechmediaserver. I installed this package. After this the web admin page was present. I removed the squeezebox and added it again. This didn't work, still could not play audio.
Next attemp I deleted the pluto slim server plugin, the slim server streamer and the SB to have it re-detected again....no improvement.
So far my skills go, hoping some one ells does better. BTW I am using a recent 10.04 of two weeks old.

EDIT1: added some of DCERouter.log
EDIT2: playing with the SB remote does work.

Best Regards
Mathieu

Code: [Select]
[08 01/21/12 7:58:35.600  Parameter 74(Offset): 0 <0x5adbbb70>
08 01/21/12 7:58:48.625 Received Message from 58 (iphone_orbiter / Kitchen) to 10 (Media Plug-in / Closet/Storage Space), type 1 id 43 Command:MH Play Media, retry none, parameters: <0x5adbbb70>
08 01/21/12 7:58:48.625  Parameter 2(PK_Device):  <0x5adbbb70>
08 01/21/12 7:58:48.625  Parameter 3(PK_DesignObj):  <0x5adbbb70>
08 01/21/12 7:58:48.625  Parameter 13(Filename): !G58 <0x5adbbb70>
08 01/21/12 7:58:48.625  Parameter 29(PK_MediaType):  <0x5adbbb70>
08 01/21/12 7:58:48.625  Parameter 44(PK_DeviceTemplate):  <0x5adbbb70>
08 01/21/12 7:58:48.625  Parameter 45(PK_EntertainArea): 4 <0x5adbbb70>
08 01/21/12 7:58:48.625  Parameter 116(Resume):  <0x5adbbb70>
08 01/21/12 7:58:48.625  Parameter 117(Repeat):  <0x5adbbb70>
08 01/21/12 7:58:48.625  Parameter 253(Queue):  <0x5adbbb70>
01 01/21/12 7:58:48.629 debug_stream_end MediaStream::MediaStream c1 1003/0x9601588 source 70 <0x87fb7b70>
07 01/21/12 7:58:48.629 Event #21 has no handlers <0xa73e9b70>
07 01/21/12 7:58:48.629 Received Message from 10 (Media Plug-in / Closet/Storage Space) to -1001 (unknown / ), type 2 id 21 Event:Listening to Media, retry none, parameters: <0xa73e9b70>
07 01/21/12 7:58:48.629  Parameter 27(PK_Room): 3 <0xa73e9b70>
08 01/21/12 7:58:48.635 Received Message from 72 (SlimServer Plug-In / ) to 71 (Slim Server Streamer / ), type 1 id 249 Command:Start Streaming, retry none, parameters: <0x979d0b70>
08 01/21/12 7:58:48.635  Parameter 29(PK_MediaType): 0 <0x979d0b70>
08 01/21/12 7:58:48.635  Parameter 41(StreamID): 1003 <0x979d0b70>
08 01/21/12 7:58:48.635  Parameter 42(MediaPosition):  <0x979d0b70>
08 01/21/12 7:58:48.635  Parameter 59(MediaURL):  <0x979d0b70>
08 01/21/12 7:58:48.635  Parameter 105(StreamingTargets): 70, <0x979d0b70>
05 01/21/12 7:58:48.635 The target device 71 (routed to 71) has not registered. <0xb7818b70>
01 01/21/12 7:58:48.636 About to call CMD_Play_Media sole master to 71 play media within start streaming <0x87fb7b70>
08 01/21/12 7:58:48.636 Received Message from 72 (SlimServer Plug-In / ) to 71 (Slim Server Streamer / ), type 1 id 37 Command:Play Media, retry none, parameters: <0x979d0b70>
08 01/21/12 7:58:48.636  Parameter 29(PK_MediaType): 4 <0x979d0b70>
08 01/21/12 7:58:48.636  Parameter 41(StreamID): 1003 <0x979d0b70>
08 01/21/12 7:58:48.636  Parameter 42(MediaPosition):  <0x979d0b70>
08 01/21/12 7:58:48.636  Parameter 59(MediaURL): /home/public/data/audio/WDC_WD10EADS-00L5B1 (sdb2) on [32]/lossy/underworld/_maxi__push_upstairs/01___(Maxi)_Push_Upstairs___Push_Upstairs.mp3 <0x979d0b70>
05 01/21/12 7:58:48.636 The target device 71 (routed to 71) has not registered. <0xb7818b70>
05 01/21/12 7:58:48.636 Is streaming ?: 1 <0x87fb7b70>
05 01/21/12 7:58:48.636 play media command sent from 72 to 71! <0x87fb7b70>
05 01/21/12 7:58:48.636 Media_Plugin::CheckForAlternatePipes no destination for EA 4 Living Room/Family Room <0x87fb7b70>
08 01/21/12 7:58:48.637 Received Message from 10 (Media Plug-in / Closet/Storage Space) to 70 (SqueezeBox Player / Living Room/Family Room), type 1 id 192 Command:On, retry none, parameters: <0xa73e9b70>
08 01/21/12 7:58:48.637  Parameter 97(PK_Pipe): 1 <0xa73e9b70>
08 01/21/12 7:58:48.637  Parameter 98(PK_Device_Pipes):  <0xa73e9b70>
05 01/21/12 7:58:48.637 The target device 70 (routed to 71) has not registered. <0xb7818b70>
08 01/21/12 7:58:48.668 Received Message from 10 (Media Plug-in / Closet/Storage Space) to 58 (iphone_orbiter / Kitchen), type 1 id 242 Command:Set Now Playing, retry none, parameters: <0xa73e9b70>
08 01/21/12 7:58:48.668  Parameter 3(PK_DesignObj): 54,4962,47,244,224,230 <0xa73e9b70>
08 01/21/12 7:58:48.668  Parameter 5(Value To Assign): Underworld
(Maxi) Push Upstairs <0xa73e9b70>
08 01/21/12 7:58:48.668  Parameter 9(Text): Push Upstairs <0xa73e9b70>
08 01/21/12 7:58:48.668  Parameter 29(PK_MediaType): 4 <0xa73e9b70>
08 01/21/12 7:58:48.668  Parameter 41(StreamID): 1003 <0xa73e9b70>
08 01/21/12 7:58:48.668  Parameter 48(Value): 0 <0xa73e9b70>
08 01/21/12 7:58:48.668  Parameter 50(Name):  <0xa73e9b70>
08 01/21/12 7:58:48.668  Parameter 103(List PK Device): 71,71,71,,0,0,0 <0xa73e9b70>
08 01/21/12 7:58:48.668  Parameter 120(Retransmit): 1 <0xa73e9b70>
05 01/21/12 7:58:48.669 Media_Plugin::StartMedia() function call completed with honors! <0x87fb7b70>
05 01/21/12 7:59:36.832 Doing MPlayer redirection check... <0x6f7dcb70>
05 01/21/12 7:59:36.832 Doing MythTV redirection check... <0x6f7dcb70>
05 01/21/12 7:59:36.832 sending CMD_Play_Media from 24 to 42 with deq pos 5 <0x6f7dcb70>
05 01/21/12 7:59:36.832 set media id command sent with id F10020 <0x6f7dcb70>
05 01/21/12 7:59:36.832 play media command sent from 24 to 42! <0x6f7dcb70>
code]
« Last Edit: January 23, 2012, 11:57:09 am by mathieu »

Gangsingen

  • Veteran
  • ***
  • Posts: 54
    • View Profile
Re: squeezebox not working
« Reply #1 on: January 21, 2012, 11:11:36 am »
Hi there!

I think it has to do with this. When I try to install pluto-slim-server-streamer  manually, I get this..

Code: [Select]
The following packages have unmet dependencies:
  pluto-slim-server-streamer: PreDepends: squeezeboxserver but it is not installable
E: Broken packages

mathieu

  • Veteran
  • ***
  • Posts: 57
    • View Profile
Re: squeezebox not working
« Reply #2 on: January 23, 2012, 11:56:34 am »
Yes, but apt suggests to install a replacement package, logitechmediaserver. Even installing this package brings no you.

mathieu

  • Veteran
  • ***
  • Posts: 57
    • View Profile
Re: 1004.....squeezebox not working
« Reply #3 on: January 31, 2012, 12:09:50 am »
Hi All,

finally, my squeezebox is back in linuxmce.
It wasn't working , pluto-slim-server-streamer couldn't install because it depends on squeezeboxserver which name has changed to logitechmediaserver.

to solve the problem:
sudo apt-get install logitechmediaserver
in a browser go to: http://deb.linuxmce.org/ubuntu/dists/lucid/beta2/binary-i386/pluto-slim-server-streamer_2.0.0.45.12012525330_i386.deb
copy the file to your home directory in the core
in a terminal type:
sudo dpkg -i --ignore-depends=squeezeboxserver pluto-slim-server-streamer_2.0.0.45.12012525330_i386.deb

Hopefully this helps others to.


coley

  • Guru
  • ****
  • Posts: 492
    • View Profile
Re: 1004.....squeezebox not working
« Reply #4 on: January 31, 2012, 12:38:22 am »
I thought I checked in a fix for this dependency issue:
http://svn.linuxmce.org/trac.cgi/ticket/1326

maybe it hasn't been approved yet.

-Coley.

coley

  • Guru
  • ****
  • Posts: 492
    • View Profile
Re: 1004.....squeezebox not working
« Reply #5 on: January 31, 2012, 12:35:26 pm »
Hi All,

finally, my squeezebox is back in linuxmce.
It wasn't working , pluto-slim-server-streamer couldn't install because it depends on squeezeboxserver which name has changed to logitechmediaserver.

to solve the problem:
sudo apt-get install logitechmediaserver
in a browser go to: http://deb.linuxmce.org/ubuntu/dists/lucid/beta2/binary-i386/pluto-slim-server-streamer_2.0.0.45.12012525330_i386.deb
copy the file to your home directory in the core
in a terminal type:
sudo dpkg -i --ignore-depends=squeezeboxserver pluto-slim-server-streamer_2.0.0.45.12012525330_i386.deb

Hopefully this helps others to.


this will leave you stuck with an unmet dependency and not able to update other packages.
-Coley.

mathieu

  • Veteran
  • ***
  • Posts: 57
    • View Profile
Re: 1004.....squeezebox not working
« Reply #6 on: February 01, 2012, 12:24:05 am »
Hi Coley,
How should this be solved then?

coley

  • Guru
  • ****
  • Posts: 492
    • View Profile
Re: 1004.....squeezebox not working
« Reply #7 on: February 01, 2012, 02:04:41 am »
Once the updated package dependency is rolled into the build the next pluto-slim-server-streamer deb will depend on the new package name.
-Coley.

Gangsingen

  • Veteran
  • ***
  • Posts: 54
    • View Profile
Re: 1004.....squeezebox not working
« Reply #8 on: February 09, 2012, 03:43:34 pm »
Now it works as it should. Just remember to check that the CLI (Command Line Interface) plugin is set to port 9090, NOT 7890.

coley

  • Guru
  • ****
  • Posts: 492
    • View Profile
Re: 1004.....squeezebox not working
« Reply #9 on: February 20, 2012, 04:18:13 pm »
posde - you created a separate package to handle this dependency, thanks.
btw why is it necessary to create another package? does updating the package name for the distro version not work via the webadmin?

thx,
-Coley.

Marie.O

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3676
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: 1004.....squeezebox not working
« Reply #10 on: February 21, 2012, 02:11:12 pm »
That way I do not need to change the Packages database, nor change any existing package.

cfernandes

  • Guru
  • ****
  • Posts: 359
    • View Profile
    • my company web site
Re: 1004.....squeezebox not working
« Reply #11 on: March 28, 2012, 01:46:00 pm »
Posde ,

you can help me ,  i try to use a squeezeslave   on 1004 but no success .

on dcerouter.log show :

8      03/28/12 8:36:57.413            Received Message from 51 (SlimServer Plug-In / ) to 50 (Slim Server Streamer / ), type 1 id 37 Command:Play Media, retry none, parameters: <0x964eeb70>
08      03/28/12 8:36:57.413              Parameter 29(PK_MediaType): 4 <0x964eeb70>
08      03/28/12 8:36:57.413              Parameter 41(StreamID): 1002 <0x964eeb70>
08      03/28/12 8:36:57.413              Parameter 42(MediaPosition):  <0x964eeb70>
08      03/28/12 8:36:57.413              Parameter 59(MediaURL): /mnt/upnp/Logitech Media Server [dcerouter]/Music/Artists/The Beatles/1962-1966/Ticket to Ride.mp3 <0x964eeb70>


but i canĀ“t see  in /mnt/upnp/Logitech Media Server [dcerouter]/

Marie.O

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3676
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: 1004.....squeezebox not working
« Reply #12 on: March 28, 2012, 08:09:14 pm »
Sounds like the SqueezeBox Server is now acting as an UPnP server as well, and causing itself to be mounted again by djmount. Interesting...

I do not have my Squeeze stuff running atm, maybe someone else can chime in.

coley

  • Guru
  • ****
  • Posts: 492
    • View Profile
Re: 1004.....squeezebox not working
« Reply #13 on: March 28, 2012, 08:39:53 pm »
Make sure the UPnP/DLNA Media Interface plugin under Settings/Plugins, in the Media Server menu, isn't ticked. Untick the box and after a Mediaserver restart it should now be listed under Inactive plugins.
This will stop further additions of this type to the lmce database.

-Coley.

cfernandes

  • Guru
  • ****
  • Posts: 359
    • View Profile
    • my company web site
Re: 1004.....squeezebox not working
« Reply #14 on: March 28, 2012, 08:43:38 pm »
i found one problem

the script /usr/pluto/bin/LaunchSlimServer.sh

is calling

invoke-rc.d squeezeboxserver restart

ans correct is    

invoke-rc.d logitechmediaserver restart

after change this  the server is up  and  and upnp is mounted  but still no sound on squeezeslave .

if a i play direct from logitechmedisaerver console the sound is played on squeezesalve.

but if i use orbiter no music on squeezeslave .