drivers for nvidia gt520

[chadac77]

the nvidia 260.xx.xx drivers that install with auto script do not work it looks like i need 285.05.09 or 270.41.06 drivers any help would be great.

[ardirtbiker]

Ive successfully installed the 285 driver on my MD.   You'll have to kill the X process and manually run the NVidia installer..   then reboot

Dennis

[Kezza]

I also had issues with my GT430 and 260 drivers. I'm now running 285.05.09 with no problems.

I deleted the contents of my nvidia-install.sh so 260 would not get reinstalled although not sure if this is actually required.

[chadac77]

can you help with the steps to fix.  i installed 285 drivers and on reboot it will install 260 drivers who do i kill the nvidia install on reboot

[Kezza]

Kill X, make a backup of nvidia-install.sh, delete its contents and save. Then try the 285 install which I think will removes the 260 drivers?

After reboot 260 should not be reinstalled.

[klanmce]

By chance, did you get hdmi audio working?

[Esperanto]

Is this also suppose to work on the avwizard? I try to install a hybrid and avwizard does not start. I installed the newer nvidia drivers with:

Code: [Select]

sudo add-apt-repository ppa:ubuntu-x-swat/x-updates
sudo apt-get update
sudo apt-get install nvidia-current
all suggestions are welcome

[ardirtbiker]

are you getting an error "Failed to start X"? or is X starting but nothing else happens?

If getting an error, check to see that the "Driver" line in /etc/X11/xorg.conf is "nvidia" and not 'nv' or other.

Dennis

[Esperanto]

are you getting an error "Failed to start X"? or is X starting but nothing else happens?

I get a blue console screen with:
AVWizard
Failed to setup X
<OK>

If getting an error, check to see that the "Driver" line in /etc/X11/xorg.conf is "nvidia" and not 'nv' or other.

the driver is "nvidia". When I manually change the xorg.cond to 1920x1080 I get X on normal boot but I need to run AVWizard to configure the MD properly.

any ideas?

[maverick0815]

I did the update yesterday on my core and my MD. After killing X I did "apt-get remove nvidia-glx-260", edited out the content of nvidia-installer.sh, downloaded the 285-nvidia drivers from their website and installed them. I did have to struggle a bit, because at first I didn't do it properly and X wouldn't start up again. Actually I  had to do it twice, but then it worked and I could get through the AV-Wizard

[Esperanto]

Hmmm I wonder if it is version or install related. It is a fresh install of 1004. The hardware was working with 1004 (I changed the mainboard and graphics card and after installing the 285 version it was running without problems but I don't know if I ever used the AVWizard). Now with xorg.conf manually set to 1920x1080 I get X but I just cannot get into AVWizard to set up everything properly. AVWizard seems to be using the correct driver:

Code: [Select]

$ cat /etc/X11/xorg.conf.pluto.avwizard |grep Driver
    Driver         "mouse"
    Driver         "kbd"
    Driver         "nvidia"
what did you put in the nvidia-install.sh file? I currently have

Code: [Select]

$ cat /usr/pluto/bin/nvidia-install.sh
#!/bin/bash

The packages that I have installed are:

Code: [Select]

$ sudo dpkg --get-selections |grep -i nvidia
nvidia-current                                  install
nvidia-current-modaliases                       install
nvidia-glx-260                                  deinstall
nvidia-settings                                 install

I saw that I still had some old versions installed:

Code: [Select]

$ apt-show-versions |grep nvidia
nvidia-current/lucid uptodate 285.05.09-0ubuntu1~lucid~xup1
nvidia-current-modaliases/lucid upgradeable from 195.36.24-0ubuntu1~10.04.1 to 285.05.09-0ubuntu1~lucid~xup1
nvidia-settings/lucid upgradeable from 195.36.08-0ubuntu2 to 285.05.09-0ubuntu1~lucid~xup1
which I upgraded with: sudo apt-get upgrade nvidia-current-modaliases

now it seems ok:

Code: [Select]

$ apt-show-versions |grep nvidia
nvidia-current/lucid uptodate 285.05.09-0ubuntu1~lucid~xup1
nvidia-current-modaliases/lucid uptodate 285.05.09-0ubuntu1~lucid~xup1
nvidia-settings/lucid uptodate 285.05.09-0ubuntu1~lucid~xup1

Still no AVWizard though.

any more suggestions?

[ardirtbiker]

not that I 'know' this will fix it... but leave the video resolution around 1024x768 or default...

you've done everything that i have done to get it working (except you changed the video res)

Dennis

[Esperanto]

the resolution I changed was directly manually for the xorg.conf. not the one for the avwizard . that tries 640 by default. Where did you set the default resolution for the avwizard?

[ardirtbiker]

I assumed it was getting it from xorg.conf.   Sorry I cant help further.

Dennis

[l3mce]

If you guys would help me, by running this and giving me the output, I will add them to the script to automatically detect these cards correctly.
lspci -nn | grep -vi "non-vga" | grep -i vga | sed 's/.*://;s/\].*//'
lspci | grep VGA | grep rev

Thanks.