Gyration remote doesn't work properly after update

[donpaul3]

I updated my core, updated my MD, and now my gyration remote does not work properly. The only working functions are the mouse, the direction buttons, and the green button. I can use the stop button to turn the volume down, and the rewind button the turn volume up, but I can't bring up the menu or use any media controls. I have been working on it all day. Anyone have any ideas?

[tschak909]

Please look in your Orbiter logs and see if there are any GenericHIDInterface errors.

-Thom

[twodogs]

Another thing to check is /etc/X11/xorg.conf under the section "ServerFlags" to see if the option "AutoAddDevices" is set to "False". I've included my xorg file for reference - see the last line.

John

Code: [Select]

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder75)  Fri Mar 12 01:42:27 PST 2010

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    Option         "DPMS"
# ModeLine "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768_75.00" 78.75 1024 1040 1136 1312 768 769 772 800 -hsync -vsync
HorizSync 20-500
VertRefresh 74-76
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
Option "XvmcUsesTextures" "true"
Option "renderAccel" "true"
Option "UseEDID" "true"
Option "ExactModeTimingsDVI" "true"
Option "NoLogo" "true"
Option "NoBandWidthTest" "true"
Option "ModeValidation" "NoDFPNativeResolutionCheck, NoEdidMaxPClkCheck, NoMaxPClkCheck, AllowInterlacedModes, AllowNon60HzDFPModes, NoEdidModes"
Option "DynamicTwinView" "false"
Option "UseEvents" "true"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
Option "ConnectedMonitor" "DFP"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
SubSection "Display"
Modes "1024x768_75"
EndSubSection
SubSection "Device"
Modes "1024x768_75"
EndSubSection
EndSection

Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection

[donpaul3]

Another thing to check is /etc/X11/xorg.conf under the section "ServerFlags" to see if the option "AutoAddDevices" is set to "False". I've included my xorg file for reference - see the last line.

John

I actually had about 30 of those options. I removed all but 1.

[tschak909]

I will try to fix this, this weekend.

-Thom

[donpaul3]

I will try to fix this, this weekend.

-Thom

Thanks Thom! I just did a fresh install with the latest snapshot, and I'm looking forward to a remote again!

[tschak909]

I  have spent all day fixing this, and am committing the fix now. Please wait for posde to run the build.

A new pluto-system-database package will be scheduled to be rebuilt as well, which will do an sqlCVS update so you can get the revised device template as well.

-Thom

[donpaul3]

I actually installed Dianemo S10.10, and there is no Gyration support there yet

Thanks for the quick fix anyway, Thom! Appreciated!