Author Topic: Media Director "Orbiter cannot register with the router  (Read 7360 times)

archived

  • Hello, I'm new here
  • Posts: 0
    • View Profile
Media Director "Orbiter cannot register with the router
« on: November 20, 2006, 06:49:07 am »
I get an error message after configuring my EPIA M10000 as a media director. It went through all of the installing fine, did the av setup screen. But now when it starts up I get a progress bar and when that finishes:
Orbiter cannot register with the router. Please try again later.
I do not even know where to begin troubleshooting this.

archived

  • Hello, I'm new here
  • Posts: 0
    • View Profile
Media Director "Orbiter cannot register with the router
« Reply #1 on: November 20, 2006, 07:20:51 am »
I have the exact same problem. My hybrid wont register and my XP orbiter will not register either. I have tried to reload the router, reboot. make new orbiters. I am out of ideas.

archived

  • Hello, I'm new here
  • Posts: 0
    • View Profile
Media Director "Orbiter cannot register with the router
« Reply #2 on: November 20, 2006, 08:42:29 am »
Have you performed any upgrades recently?  If not, then I suggest that you upgrade to .42 as it has resolved a number of issues for me.

On your Hybrid/Core, press
Code: [Select]
Ctrl+Alt+F2, this should give you a command prompt.  log in as root using the password you setup on install (you remembered to keep it right? :? )

Now type
Code: [Select]
/sbin/ifconfig | pg - this will list your network interfaces.  if you went with the defaults, eth0 should be DHCP and obtain an IP Address from your router, eth1 should be in the range of 192.168.80.xxx and should be static.

Try to ping the following addresses from the command line of the core:

1) 127.0.0.1
2) the ip listed by eth0
3) the ip listed by eth1
4) www.google.com

If these all come back ok, then try and post your logs here and we'll see what we can sort.

If any of the above fail, let us know and we'll see if we can work it out! :)

HTH,

xMarks

archived

  • Hello, I'm new here
  • Posts: 0
    • View Profile
Media Director "Orbiter cannot register with the router
« Reply #3 on: November 20, 2006, 10:29:39 am »
I just installed it for the first time with .42. I could ping all those just fine. Heres some logs. I didnt know which ones you needed. In DCERouter.log that was repeated over and over and over. I noticed in the syslog that it could not start the log for the Media Director due to permissions.?????

XP Orbiter Log

Code: [Select]
10 11/20/06 3:25:21.194 Device: 0 starting.  Connecting to: dcerouter
10 11/20/06 3:25:21.224 Stage connect
10 11/20/06 3:25:21.244 Orbiter 003769C0 constructor
10 11/20/06 3:25:21.244 New orbiter created!
01 11/20/06 3:25:21.244 Connection for client socket reported BAD DEVICE IP=192.168.1.253 MAC=00:08:54:30:BE:8E, device 0 last error 3
05 11/20/06 3:25:21.745 void ClientSocket::Disconnect() on this socket: 00379DD8 (m_Socket: 272)
10 11/20/06 3:25:21.745 Orbiter::DeviceIdInvalid
10 11/20/06 3:25:26.571 start SetupNewOrbiter
10 11/20/06 3:25:26.581 SetupNewOrbiter prompting for inputs
05 11/20/06 3:25:29.736 void ClientSocket::Disconnect() on this socket: 0037C9D0 (m_Socket: 316)
05 11/20/06 3:25:30.888 void ClientSocket::Disconnect() on this socket: 0037C9D0 (m_Socket: 328)
05 11/20/06 3:25:32.430 void ClientSocket::Disconnect() on this socket: 0037C9D0 (m_Socket: 340)
05 11/20/06 3:25:33.972 void ClientSocket::Disconnect() on this socket: 0037C9D0 (m_Socket: 352)
05 11/20/06 3:25:34.733 void ClientSocket::Disconnect() on this socket: 0037C9D0 (m_Socket: 364)
01 11/20/06 3:25:34.733 SetupNewOrbiter unable to create orbiter
05 11/20/06 3:25:35.334 void ClientSocket::Disconnect() on this socket: 0037C7D8 (m_Socket: 288)
05 11/20/06 3:25:35.334 Orbiter quiting...
13 11/20/06 3:25:35.334 Exiting MessageQueueThread_DCECI thread...



/var/log/pluto/DCERouter.log

Code: [Select]
13 11/20/06 3:05:05.125 TCPIP: Accepting incoming connection on socket 119, port 3450, from IP 127.0.0.1.
10 11/20/06 3:05:05.125 Thread created for Incoming_Conn Socket 119 127.0.0.1 dev -1 ptr 0x84faf88
10 11/20/06 3:05:05.126 Socket::ReceiveData failed, bytes left 0 m_Socket: 119 Incoming_Conn Socket 119 127.0.0.1
10 11/20/06 3:05:05.126 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 119 127.0.0.1
05 11/20/06 3:05:05.126 TCPIP: Closing connection to -1 (Router Dev #0) 0x84faf88 m_Socket: -1
10 11/20/06 3:05:05.126 Detected disconnect: detaching thread for -1
05 11/20/06 3:05:05.126 Router::RemoveAndDeleteSocket 0x84faf88 -1
13 11/20/06 3:05:05.126 Removing socket 0x84faf88 from socket listener
22 11/20/06 3:05:05.126 Stale Command handler (0x84faf88) for -1 closed.
22 11/20/06 3:05:05.126 Map server socket size 17, vector server socket size 61
08 11/20/06 3:05:06.039 Received Message from 20 (OnScreen Orbiter / Living Room) to 9 (Orbiter Plug-in / ), type 1 id 183 Command:Get Floorplan Layout, parameters:
08 11/20/06 3:05:06.039  Parameter 5(Value To Assign):
05 11/20/06 3:05:06.039 The target device 9 (routed to 9) has not registered.
01 11/20/06 3:05:06.039 Sender: 20 sent message type: 1 ID: 183 and expected a message reply from 9
08 11/20/06 3:05:06.073 Received Message from 20 (OnScreen Orbiter / Living Room) to 9 (Orbiter Plug-in / ), type 1 id 255 Command:Orbiter Registered, parameters:
08 11/20/06 3:05:06.073  Parameter 8(On/Off): 1
08 11/20/06 3:05:06.073  Parameter 17(PK_Users): 1
08 11/20/06 3:05:06.073  Parameter 45(PK_EntertainArea): 1
08 11/20/06 3:05:06.073  Parameter 57(PK_Room): 2
08 11/20/06 3:05:06.073 Received Message from 20 (OnScreen Orbiter / Living Room) to 9 (Orbiter Plug-in / ), type 1 id 58 Command:Set Current User, parameters:
08 11/20/06 3:05:06.073  Parameter 17(PK_Users): 1
05 11/20/06 3:05:06.073 The target device 9 (routed to 9) has not registered.
01 11/20/06 3:05:06.073 Sender: 20 sent message type: 1 ID: 255 and expected a message reply from 9
13 11/20/06 3:05:07.168 TCPIP: Accepting incoming connection on socket 119, port 3450, from IP 127.0.0.1.
10 11/20/06 3:05:07.169 Thread created for Incoming_Conn Socket 119 127.0.0.1 dev -1 ptr 0x84faf88
10 11/20/06 3:05:07.169 Socket::ReceiveData failed, bytes left 0 m_Socket: 119 Incoming_Conn Socket 119 127.0.0.1
10 11/20/06 3:05:07.169 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 119 127.0.0.1
05 11/20/06 3:05:07.169 TCPIP: Closing connection to -1 (Router Dev #0) 0x84faf88 m_Socket: -1
10 11/20/06 3:05:07.169 Detected disconnect: detaching thread for -1
05 11/20/06 3:05:07.169 Router::RemoveAndDeleteSocket 0x84faf88 -1
13 11/20/06 3:05:07.169 Removing socket 0x84faf88 from socket listener
22 11/20/06 3:05:07.169 Stale Command handler (0x84faf88) for -1 closed.
22 11/20/06 3:05:07.169 Map server socket size 17, vector server socket size 61


/var/log/syslog

Code: [Select]
Nov 20 03:02:24 dcerouter dhcpd: DHCPDISCOVER from 00:40:63:d9:0b:d0 via eth0
Nov 20 03:02:24 dcerouter dhcpd: DHCPOFFER on 192.168.1.10 to 00:40:63:d9:0b:d0 via eth0
Nov 20 03:02:26 dcerouter dhcpd: DHCPREQUEST for 192.168.1.10 (192.168.1.1) from 00:40:63:d9:0b:d0 via eth0
Nov 20 03:02:26 dcerouter dhcpd: DHCPACK on 192.168.1.10 to 00:40:63:d9:0b:d0 via eth0
Nov 20 03:02:26 dcerouter in.tftpd[18329]: connect from 192.168.1.10 (192.168.1.10)
Nov 20 03:02:26 dcerouter atftpd[18329]: Advanced Trivial FTP server started (0.7)
Nov 20 03:02:26 dcerouter atftpd[18329]: Serving /tftpboot/pxelinux.0 to 192.168.1.10:2070
Nov 20 03:02:26 dcerouter atftpd[18329]: Serving /tftpboot/pxelinux.0 to 192.168.1.10:2071
Nov 20 03:02:26 dcerouter atftpd[18329]: Serving /tftpboot/pxelinux.cfg/01-00-40-63-d9-0b-d0 to 192.168.1.10:57089
Nov 20 03:02:26 dcerouter atftpd[18329]: Serving /tftpboot/19/vmlinuz-2.6.16.20-pluto-2-686 to 192.168.1.10:57090
Nov 20 03:02:27 dcerouter atftpd[18329]: Serving /tftpboot/19/initrd.img-2.6.16.20-pluto-2-686 to 192.168.1.10:57091
Nov 20 03:02:37 dcerouter dhcpd: DHCPDISCOVER from 00:40:63:d9:0b:d0 via eth0
Nov 20 03:02:37 dcerouter dhcpd: DHCPOFFER on 192.168.1.10 to 00:40:63:d9:0b:d0 via eth0
Nov 20 03:02:37 dcerouter dhcpd: DHCPREQUEST for 192.168.1.10 (192.168.1.1) from 00:40:63:d9:0b:d0 via eth0
Nov 20 03:02:37 dcerouter dhcpd: DHCPACK on 192.168.1.10 to 00:40:63:d9:0b:d0 via eth0
Nov 20 03:02:38 dcerouter dhcpd: DHCPREQUEST for 192.168.1.10 (192.168.1.1) from 00:40:63:d9:0b:d0 via eth0
Nov 20 03:02:38 dcerouter dhcpd: DHCPACK on 192.168.1.10 to 00:40:63:d9:0b:d0 via eth0
Nov 20 03:02:38 dcerouter rpc.mountd: authenticated mount request from moon19:844 for /home/diskless/19 (/home/diskless/19)
Nov 20 03:02:56 dcerouter rpc.mountd: authenticated mount request from moon19:687 for /home (/home)
Nov 20 03:02:56 dcerouter rpc.mountd: authenticated mount request from moon19:691 for /usr/pluto/orbiter (/usr/pluto/orbiter)
Nov 20 03:02:56 dcerouter rpc.mountd: authenticated mount request from moon19:695 for /usr/pluto/keys (/usr/pluto/keys)
Nov 20 03:02:56 dcerouter rpc.mountd: authenticated mount request from moon19:699 for /usr/pluto/deb-cache (/usr/pluto/deb-cache)
Nov 20 03:02:56 dcerouter rpc.mountd: authenticated mount request from moon19:703 for /usr/pluto/var (/usr/pluto/var)
Nov 20 03:02:56 moon19 syslogd 1.4.1#17: restart (remote reception).
Nov 20 03:03:01 dcerouter /USR/SBIN/CRON[18836]: (root) CMD (/usr/pluto/bin/DiskSpaceMonitor.sh)
Nov 20 03:03:13 moon19 init: Trying to re-exec init
Nov 20 03:03:40 moon19 init: Entering runlevel: 2
Nov 20 03:03:53 moon19 kernel: klogd 1.4.1#17, log source = /proc/kmsg started.
Nov 20 03:03:53 moon19 kernel: Inspecting /boot/System.map-2.6.16.20-pluto-2-686
Nov 20 03:03:53 moon19 kernel: Loaded 23535 symbols from /boot/System.map-2.6.16.20-pluto-2-686.
Nov 20 03:03:53 moon19 kernel: Symbols match kernel version 2.6.16.
Nov 20 03:03:53 moon19 kernel: No module symbols loaded - kernel modules not enabled.  
Nov 20 03:03:53 moon19 kernel: Linux version 2.6.16.20-pluto-2-686 (root@pluto-devel) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Tue Nov 7 17:16:24 EET 2006
Nov 20 03:03:53 moon19 kernel: BIOS-provided physical RAM map:
Nov 20 03:03:53 moon19 kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 20 03:03:53 moon19 kernel:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 20 03:03:53 moon19 kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 20 03:03:53 moon19 kernel:  BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
Nov 20 03:03:53 moon19 kernel:  BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
Nov 20 03:03:53 moon19 kernel:  BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
Nov 20 03:03:53 moon19 kernel:  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Nov 20 03:03:53 moon19 kernel: 0MB HIGHMEM available.
Nov 20 03:03:53 moon19 kernel: 223MB LOWMEM available.
Nov 20 03:03:53 moon19 kernel: On node 0 totalpages: 57328
Nov 20 03:03:53 moon19 kernel:   DMA zone: 4096 pages, LIFO batch:0
Nov 20 03:03:53 moon19 kernel:   DMA32 zone: 0 pages, LIFO batch:0
Nov 20 03:03:53 moon19 kernel:   Normal zone: 53232 pages, LIFO batch:15
Nov 20 03:03:53 moon19 kernel:   HighMem zone: 0 pages, LIFO batch:0
Nov 20 03:03:53 moon19 kernel: DMI 2.2 present.
Nov 20 03:03:53 moon19 kernel: ACPI: RSDP (v000 VT9174                                ) @ 0x000f6620
Nov 20 03:03:53 moon19 kernel: ACPI: RSDT (v001 VT9174 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0dff3000
Nov 20 03:03:53 moon19 kernel: ACPI: FADT (v001 VT9174 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0dff3040
Nov 20 03:03:53 moon19 kernel: ACPI: DSDT (v001 VT9174 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Nov 20 03:03:53 moon19 kernel: ACPI: PM-Timer IO Port: 0x408
Nov 20 03:03:53 moon19 kernel: Allocating PCI resources starting at 10000000 (gap: 0e000000:f1ff0000)
Nov 20 03:03:53 moon19 kernel: Built 1 zonelists
Nov 20 03:03:53 moon19 kernel: Kernel command line: initrd=19/initrd.img-2.6.16.20-pluto-2-686 ramdisk_size=10240 rw boot=nfs nfsroot=192.168.1.1:/usr/pluto/diskless/19 noirqdebug vga=normal vga=0x311 splash=silent nfsopts=intr,udp,rsize=32768,wsize=32768,retrans=10,timeo=50 quiet apicpmtimer BOOT_IMAGE=19
Nov 20 03:03:53 moon19 kernel: IRQ lockup detection disabled
Nov 20 03:03:53 moon19 kernel: bootsplash: silent mode.
Nov 20 03:03:53 moon19 kernel: Enabling fast FPU save and restore... done.
Nov 20 03:03:53 moon19 kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 20 03:03:53 moon19 kernel: Initializing CPU#0
Nov 20 03:03:53 moon19 kernel: PID hash table entries: 1024 (order: 10, 16384 bytes)
Nov 20 03:03:53 moon19 kernel: Detected 999.936 MHz processor.
Nov 20 03:03:53 moon19 kernel: Using pmtmr for high-res timesource
Nov 20 03:03:53 moon19 kernel: Console: colour dummy device 80x25
Nov 20 03:03:53 moon19 kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 20 03:03:53 moon19 kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Nov 20 03:03:53 moon19 kernel: Memory: 218564k/229312k available (1847k kernel code, 10152k reserved, 592k data, 160k init, 0k highmem)
Nov 20 03:03:53 moon19 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Nov 20 03:03:53 moon19 kernel: Calibrating delay using timer specific routine.. 2002.64 BogoMIPS (lpj=4005289)
Nov 20 03:03:53 moon19 kernel: Security Framework v1.0.0 initialized
Nov 20 03:03:53 moon19 kernel: SELinux:  Disabled at boot.
Nov 20 03:03:53 moon19 kernel: Capability LSM initialized
Nov 20 03:03:53 moon19 kernel: Mount-cache hash table entries: 512
Nov 20 03:03:53 moon19 kernel: CPU: After generic identify, caps: 0380b03d 00000000 00000000 00000000 00000000 00000000 00000000
Nov 20 03:03:53 moon19 kernel: CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
Nov 20 03:03:53 moon19 kernel: CPU: L2 Cache: 64K (32 bytes/line)
Nov 20 03:03:53 moon19 kernel: CPU: After all inits, caps: 0380b13d 00000000 00000000 00000000 00000000 0000003d 00000000
Nov 20 03:03:53 moon19 kernel: CPU: Centaur VIA Nehemiah stepping 05
Nov 20 03:03:53 moon19 kernel: Checking 'hlt' instruction... OK.
Nov 20 03:03:53 moon19 kernel: ACPI: setting ELCR to 0200 (from 0e20)
Nov 20 03:03:53 moon19 kernel: checking if image is initramfs... it is
Nov 20 03:03:53 moon19 kernel: Freeing initrd memory: 5262k freed
Nov 20 03:03:53 moon19 kernel: NET: Registered protocol family 16
Nov 20 03:03:53 moon19 kernel: ACPI: bus type pci registered
Nov 20 03:03:53 moon19 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb260, last bus=1
Nov 20 03:03:53 moon19 kernel: PCI: Using configuration type 1
Nov 20 03:03:53 moon19 kernel: ACPI: Subsystem revision 20060127
Nov 20 03:03:53 moon19 kernel: ACPI: Interpreter enabled
Nov 20 03:03:53 moon19 kernel: ACPI: Using PIC for interrupt routing
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 20 03:03:53 moon19 kernel: PCI: Probing PCI hardware (bus 00)
Nov 20 03:03:53 moon19 kernel: PCI quirk: region 0400-047f claimed by vt8235 PM
Nov 20 03:03:53 moon19 kernel: PCI quirk: region 0500-050f claimed by vt8235 SMB
Nov 20 03:03:53 moon19 kernel: Boot video device is 0000:01:00.0
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Nov 20 03:03:53 moon19 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 20 03:03:53 moon19 kernel: pnp: PnP ACPI init
Nov 20 03:03:53 moon19 kernel: pnp: PnP ACPI: found 14 devices
Nov 20 03:03:53 moon19 kernel: PnPBIOS: Disabled by ACPI PNP
Nov 20 03:03:53 moon19 kernel: PCI: Using ACPI for IRQ routing
Nov 20 03:03:53 moon19 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Nov 20 03:03:53 moon19 kernel: pnp: 00:02: ioport range 0x400-0x47f could not be reserved
Nov 20 03:03:53 moon19 kernel: pnp: 00:02: ioport range 0x500-0x50f has been reserved
Nov 20 03:03:53 moon19 kernel: PCI: Bridge: 0000:00:01.0
Nov 20 03:03:53 moon19 kernel:   IO window: disabled.
Nov 20 03:03:53 moon19 kernel:   MEM window: dc000000-ddffffff
Nov 20 03:03:53 moon19 kernel:   PREFETCH window: d8000000-dbffffff
Nov 20 03:03:53 moon19 kernel: PCI: Setting latency timer of device 0000:00:01.0 to 64
Nov 20 03:03:53 moon19 kernel: audit: initializing netlink socket (disabled)
Nov 20 03:03:53 moon19 kernel: audit(1164013354.780:1): initialized
Nov 20 03:03:53 moon19 kernel: VFS: Disk quotas dquot_6.5.1
Nov 20 03:03:53 moon19 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 20 03:03:53 moon19 kernel: Initializing Cryptographic API
Nov 20 03:03:53 moon19 kernel: io scheduler noop registered
Nov 20 03:03:53 moon19 kernel: io scheduler anticipatory registered (default)
Nov 20 03:03:53 moon19 kernel: io scheduler deadline registered
Nov 20 03:03:53 moon19 kernel: io scheduler cfq registered
Nov 20 03:03:53 moon19 kernel: vesafb: framebuffer at 0xd8000000, mapped to 0xbe880000, using 2400k, total 32768k
Nov 20 03:03:53 moon19 kernel: vesafb: mode is 640x480x16, linelength=1280, pages=50
Nov 20 03:03:53 moon19 kernel: vesafb: protected mode interface info at c000:8846
Nov 20 03:03:53 moon19 kernel: vesafb: scrolling: redraw
Nov 20 03:03:53 moon19 kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Nov 20 03:03:53 moon19 kernel: Console: switching to colour frame buffer device 80x30
Nov 20 03:03:53 moon19 kernel: fb0: VESA VGA frame buffer device
Nov 20 03:03:53 moon19 kernel: isapnp: Scanning for PnP cards...
Nov 20 03:03:53 moon19 kernel: isapnp: No Plug & Play device found
Nov 20 03:03:53 moon19 kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Nov 20 03:03:53 moon19 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 20 03:03:53 moon19 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 20 03:03:53 moon19 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Nov 20 03:03:53 moon19 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 20 03:03:53 moon19 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Nov 20 03:03:53 moon19 kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 20 03:03:53 moon19 kernel: 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Nov 20 03:03:53 moon19 kernel: RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
Nov 20 03:03:53 moon19 kernel: NET: Registered protocol family 2
Nov 20 03:03:53 moon19 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Nov 20 03:03:53 moon19 kernel: IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Nov 20 03:03:53 moon19 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Nov 20 03:03:53 moon19 kernel: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Nov 20 03:03:53 moon19 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Nov 20 03:03:53 moon19 kernel: TCP reno registered
Nov 20 03:03:53 moon19 kernel: TCP bic registered
Nov 20 03:03:53 moon19 kernel: NET: Registered protocol family 1
Nov 20 03:03:53 moon19 kernel: NET: Registered protocol family 17
Nov 20 03:03:53 moon19 kernel: NET: Registered protocol family 8
Nov 20 03:03:53 moon19 kernel: NET: Registered protocol family 20
Nov 20 03:03:53 moon19 kernel: Using IPI Shortcut mode
Nov 20 03:03:53 moon19 kernel: ACPI wakeup devices:  
Nov 20 03:03:53 moon19 kernel: PCI0 USB0 USB1 USB2 USB3 USB4 USB5 USB6 LAN0 AC97 MC97 UAR1  
Nov 20 03:03:53 moon19 kernel: ACPI: (supports S0 S1 S4 S5)
Nov 20 03:03:53 moon19 kernel: Freeing unused kernel memory: 160k freed
Nov 20 03:03:53 moon19 kernel: ne.c: You must supply "io=0xNNN" value(s) for ISA cards.
Nov 20 03:03:53 moon19 kernel: 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Nov 20 03:03:53 moon19 kernel: 8139too Fast Ethernet driver 0.9.27
Nov 20 03:03:53 moon19 kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
Nov 20 03:03:53 moon19 kernel: e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
Nov 20 03:03:53 moon19 kernel: e100: Copyright(c) 1999-2005 Intel Corporation
Nov 20 03:03:53 moon19 kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
Nov 20 03:03:53 moon19 kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Nov 20 03:03:53 moon19 kernel: eexpress.c: Module autoprobe not recommended, give io=xx.
Nov 20 03:03:53 moon19 kernel: eexpress.c: Failed to register card at 0x0.
Nov 20 03:03:53 moon19 kernel: epic100.c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>
Nov 20 03:03:53 moon19 kernel:   http://www.scyld.com/network/epic100.html
Nov 20 03:03:53 moon19 kernel:   (unofficial 2.4.x kernel port, version 1.11+LK1.1.14+AC1.1.14, June 2, 2004)
Nov 20 03:03:53 moon19 kernel: ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
Nov 20 03:03:53 moon19 kernel:   http://www.scyld.com/network/ne2k-pci.html
Nov 20 03:03:53 moon19 kernel: sis900.c: v1.08.09 Sep. 19 2005
Nov 20 03:03:53 moon19 kernel: ThunderLAN driver v1.15
Nov 20 03:03:53 moon19 kernel: TLAN: 0 devices installed, PCI: 0  EISA: 0
Nov 20 03:03:53 moon19 kernel: Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
Nov 20 03:03:53 moon19 kernel: via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Nov 20 03:03:53 moon19 kernel: PCI: setting IRQ 11 as level-triggered
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Nov 20 03:03:53 moon19 kernel: eth0: VIA Rhine II at 0x1ec00, 00:40:63:d9:0b:d0, IRQ 11.
Nov 20 03:03:53 moon19 kernel: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
Nov 20 03:03:53 moon19 kernel: yellowfin.c:v1.05  1/09/2001  Written by Donald Becker <becker@scyld.com>
Nov 20 03:03:53 moon19 kernel:   http://www.scyld.com/network/yellowfin.html
Nov 20 03:03:53 moon19 kernel:   (unofficial 2.4.x port, 1.05+LK1.1.6, Feb 11, 2002)
Nov 20 03:03:53 moon19 kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49.
Nov 20 03:03:53 moon19 kernel: pcnet32.c:v1.31c 01.Nov.2005 tsbogend@alpha.franken.de
Nov 20 03:03:53 moon19 kernel: Intel(R) PRO/1000 Network Driver - version 6.3.9-k4-NAPI
Nov 20 03:03:53 moon19 kernel: Copyright (c) 1999-2005 Intel Corporation.
Nov 20 03:03:53 moon19 kernel: fealnx.c:v2.51 Nov-17-2001
Nov 20 03:03:53 moon19 kernel: natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
Nov 20 03:03:53 moon19 kernel:   originally by Donald Becker <becker@scyld.com>
Nov 20 03:03:53 moon19 kernel:   http://www.scyld.com/network/natsemi.html
Nov 20 03:03:53 moon19 kernel:   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
Nov 20 03:03:53 moon19 kernel: ieee1394: Initialized config rom entry `ip1394'
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
Nov 20 03:03:53 moon19 kernel: PCI: setting IRQ 5 as level-triggered
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Nov 20 03:03:53 moon19 kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5]  MMIO=[de000000-de0007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Nov 20 03:03:53 moon19 kernel: usbcore: registered new driver usbfs
Nov 20 03:03:53 moon19 kernel: usbcore: registered new driver hub
Nov 20 03:03:53 moon19 kernel: USB Universal Host Controller Interface driver v2.3
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Nov 20 03:03:53 moon19 kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Nov 20 03:03:53 moon19 kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Nov 20 03:03:53 moon19 kernel: uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d400
Nov 20 03:03:53 moon19 kernel: usb usb1: configuration #1 chosen from 1 choice
Nov 20 03:03:53 moon19 kernel: hub 1-0:1.0: USB hub found
Nov 20 03:03:53 moon19 kernel: hub 1-0:1.0: 2 ports detected
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Nov 20 03:03:53 moon19 kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Nov 20 03:03:53 moon19 kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Nov 20 03:03:53 moon19 kernel: uhci_hcd 0000:00:10.1: irq 5, io base 0x0000d800
Nov 20 03:03:53 moon19 kernel: usb usb2: configuration #1 chosen from 1 choice
Nov 20 03:03:53 moon19 kernel: hub 2-0:1.0: USB hub found
Nov 20 03:03:53 moon19 kernel: hub 2-0:1.0: 2 ports detected
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Nov 20 03:03:53 moon19 kernel: PCI: setting IRQ 10 as level-triggered
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Nov 20 03:03:53 moon19 kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Nov 20 03:03:53 moon19 kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Nov 20 03:03:53 moon19 kernel: uhci_hcd 0000:00:10.2: irq 10, io base 0x0000dc00
Nov 20 03:03:53 moon19 kernel: usb usb3: configuration #1 chosen from 1 choice
Nov 20 03:03:53 moon19 kernel: hub 3-0:1.0: USB hub found
Nov 20 03:03:53 moon19 kernel: hub 3-0:1.0: 2 ports detected
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Nov 20 03:03:53 moon19 kernel: ehci_hcd 0000:00:10.3: EHCI Host Controller
Nov 20 03:03:53 moon19 kernel: ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Nov 20 03:03:53 moon19 kernel: ehci_hcd 0000:00:10.3: irq 11, io mem 0xde001000
Nov 20 03:03:53 moon19 kernel: ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 20 03:03:53 moon19 kernel: usb usb4: configuration #1 chosen from 1 choice
Nov 20 03:03:53 moon19 kernel: hub 4-0:1.0: USB hub found
Nov 20 03:03:53 moon19 kernel: hub 4-0:1.0: 6 ports detected
Nov 20 03:03:53 moon19 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 20 03:03:53 moon19 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 20 03:03:53 moon19 kernel: VP_IDE: IDE controller at PCI slot 0000:00:11.1
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Nov 20 03:03:53 moon19 kernel: PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 11
Nov 20 03:03:53 moon19 kernel: VP_IDE: chipset revision 6
Nov 20 03:03:53 moon19 kernel: VP_IDE: not 100%% native mode: will probe irqs later
Nov 20 03:03:53 moon19 kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
Nov 20 03:03:53 moon19 kernel:     ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
Nov 20 03:03:53 moon19 kernel:     ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:pio
Nov 20 03:03:53 moon19 kernel: Probing IDE interface ide0...
Nov 20 03:03:53 moon19 kernel: hub 4-0:1.0: over-current change on port 5
Nov 20 03:03:53 moon19 kernel: hub 4-0:1.0: over-current change on port 6
Nov 20 03:03:53 moon19 kernel: hda: ST320011A, ATA DISK drive
Nov 20 03:03:53 moon19 kernel: ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00406350000259c8]
Nov 20 03:03:53 moon19 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 20 03:03:53 moon19 kernel: Probing IDE interface ide1...
Nov 20 03:03:53 moon19 kernel: hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, ATAPI CD/DVD-ROM drive
Nov 20 03:03:53 moon19 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 20 03:03:53 moon19 kernel: hda: max request size: 128KiB
Nov 20 03:03:53 moon19 kernel: hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
Nov 20 03:03:53 moon19 kernel: hda: cache flushes not supported
Nov 20 03:03:53 moon19 kernel:  hda: hda1 hda2 hda3
Nov 20 03:03:53 moon19 kernel: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Nov 20 03:03:53 moon19 kernel: Uniform CD-ROM driver Revision: 3.20
Nov 20 03:03:53 moon19 kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Nov 20 03:03:53 moon19 kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 18594 bytes,<6>...found (640x480, 15097 bytes, v3).
Nov 20 03:03:53 moon19 kernel: bootsplash: status on console 0 changed to on
Nov 20 03:03:53 moon19 kernel: irda_init()
Nov 20 03:03:53 moon19 kernel: NET: Registered protocol family 23
Nov 20 03:03:53 moon19 kernel: Real Time Clock Driver v1.12ac
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Nov 20 03:03:53 moon19 kernel: PCI: Setting latency timer of device 0000:00:11.5 to 64
Nov 20 03:03:53 moon19 kernel: Floppy drive(s): fd0 is 1.44M
Nov 20 03:03:53 moon19 kernel: FDC 0 is a post-1991 82077
Nov 20 03:03:53 moon19 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Nov 20 03:03:53 moon19 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 20 03:03:53 moon19 kernel: agpgart: Detected VIA CLE266 chipset
Nov 20 03:03:53 moon19 kernel: agpgart: AGP aperture is 128M @ 0xd0000000
Nov 20 03:03:53 moon19 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 20 03:03:53 moon19 kernel: parport: PnPBIOS parport detected.
Nov 20 03:03:53 moon19 kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
Nov 20 03:03:53 moon19 kernel: input: PS/2 Generic Mouse as /class/input/input1
Nov 20 03:03:53 moon19 kernel: eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Nov 20 03:03:53 moon19 kernel: ts: Compaq touchscreen protocol output
Nov 20 03:03:53 moon19 kernel: mice: PS/2 mouse device common for all mice
Nov 20 03:03:53 moon19 kernel: NET: Registered protocol family 10
Nov 20 03:03:53 moon19 kernel: lo: Disabled Privacy Extensions
Nov 20 03:03:53 moon19 kernel: IPv6 over IPv4 tunneling driver
Nov 20 03:03:53 moon19 kernel: process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
Nov 20 03:03:53 moon19 kernel: eth0: no IPv6 routers present
Nov 20 03:03:53 moon19 kernel: Linux video capture interface: v1.00
Nov 20 03:03:53 moon19 kernel: bttv: driver version 0.9.16 loaded
Nov 20 03:03:53 moon19 kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Nov 20 03:03:53 moon19 kernel: [drm] Initialized drm 1.0.1 20051102
Nov 20 03:03:53 moon19 kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Nov 20 03:03:53 moon19 kernel: [drm] Initialized via 2.7.4 20051116 on minor 0
Nov 20 03:03:53 moon19 kernel: agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Nov 20 03:03:53 moon19 kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Nov 20 03:03:53 moon19 kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Nov 20 03:03:53 moon19 kernel: bootsplash: status on console 0 changed to on
Nov 20 03:03:53 moon19 rpc.statd[8434]: Version 1.0.6 Starting
Nov 20 03:03:53 moon19 rpc.statd[8434]: statd running as root. chown /var/lib/nfs/sm to choose different user  
Nov 20 03:03:54 moon19 /usr/sbin/cron[8602]: (CRON) INFO (pidfile fd = 3)
Nov 20 03:03:55 moon19 /usr/sbin/cron[8617]: (CRON) STARTUP (fork ok)
Nov 20 03:03:55 moon19 kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Nov 20 03:03:55 moon19 kernel: apm: overridden by ACPI.
Nov 20 03:03:55 moon19 /usr/sbin/cron[8617]: (CRON) INFO (Skipping @reboot jobs -- not system startup)
Nov 20 03:03:57 moon19 kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (640x480, 15097 bytes, v3).
Nov 20 03:03:57 moon19 kernel: bootsplash: status on console 1 changed to on
Nov 20 03:03:57 moon19 kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (640x480, 15097 bytes, v3).
Nov 20 03:03:57 moon19 kernel: bootsplash: status on console 2 changed to on
Nov 20 03:03:57 moon19 kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (640x480, 15097 bytes, v3).
Nov 20 03:03:57 moon19 kernel: bootsplash: status on console 3 changed to on
Nov 20 03:03:57 moon19 kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (640x480, 15097 bytes, v3).
Nov 20 03:03:57 moon19 kernel: bootsplash: status on console 4 changed to on
Nov 20 03:03:57 moon19 kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (640x480, 15097 bytes, v3).
Nov 20 03:03:57 moon19 kernel: bootsplash: status on console 5 changed to on
Nov 20 03:03:58 moon19 exim[8930]: 2006-11-20 03:03:58 exim 4.50 daemon started: pid=8930, -q30m, listening for SMTP on [127.0.0.1]:25
Nov 20 03:03:58 moon19 exim[8930]: 2006-11-20 03:03:58 Cannot open main log file "/var/log/exim4/mainlog": Permission denied: euid=102 egid=102
Nov 20 03:03:58 moon19 exim[8930]: exim: could not open panic log - aborting: see message(s) above
Nov 20 03:06:01 dcerouter /USR/SBIN/CRON[21505]: (root) CMD (/usr/pluto/bin/DiskSpaceMonitor.sh)
Nov 20 03:06:01 moon19 /USR/SBIN/CRON[10435]: (root) CMD (/usr/pluto/bin/DiskSpaceMonitor.sh)
Nov 20 03:07:27 dcerouter atftpd[18329]: atftpd terminating after 300 seconds
Nov 20 03:07:27 dcerouter atftpd[18329]: Main thread exiting
Nov 20 03:09:01 dcerouter /USR/SBIN/CRON[24176]: (root) CMD (/usr/pluto/bin/DiskSpaceMonitor.sh)
Nov 20 03:09:01 dcerouter /USR/SBIN/CRON[24178]: (root) CMD (  [ -d /var/lib/php4 ] && find /var/lib/php4/ -type f -cmin +$(/usr/lib/php4/maxlifetime) -print0 | xargs -r -0 rm)
Nov 20 03:09:01 moon19 /USR/SBIN/CRON[12070]: (root) CMD (/usr/pluto/bin/DiskSpaceMonitor.sh)
Code: [Select]

archived

  • Hello, I'm new here
  • Posts: 0
    • View Profile
Me too
« Reply #4 on: December 02, 2006, 03:02:52 pm »
Yes I've just gone through a dozen installs of v42 on MiniITX each time tried something different but I get the above too. I also notice that flickr.pl keeps spawning more and more eating around 200mb of memory each which gets to a point of a load avg of 20 and no longer responds.

I tried an install of v39 which gets updates nd that fails too. That was my last fullly working version.

Kev,

archived

  • Hello, I'm new here
  • Posts: 0
    • View Profile
A follow up
« Reply #5 on: December 07, 2006, 10:18:04 pm »
To add I was using it fine on v39 as a media director but v42 wont work. now I notcied that there is an ALSA warning about needing to try dxs_support=5 I have no idea if that was there before though. I'm going to give it a closer look as could it have broken between versions?

Perhaps the orbitor is having trouble because the media director is not working?

I did have one instance of the avwizard locking up on the sound bit. I've tried no sound at all but not no luck. I may next try disabling the sound card completely and see what it does.

Kev,

archived

  • Hello, I'm new here
  • Posts: 0
    • View Profile
Video Issue?
« Reply #6 on: December 12, 2006, 08:48:41 pm »
More digging and I'm wondering if the problem is releated to X Windows. I have X running but perhaps the orbiter is having an issue with starting within X?

I'm trying a few variiations on the X setup. I was interested to noticed that the X logs said it was running with SDL and not xm or something which was the default on the media director.

Kev,

archived

  • Hello, I'm new here
  • Posts: 0
    • View Profile
DCERouter not running
« Reply #7 on: December 13, 2006, 03:29:40 pm »
This is one of the issues that made me give up with Pluto for the time being.  I found that DCERouter often died on my core; restarting it solved the problem of the orbiter not being able to connect.

I'm currently running MiniMyth as a front end, which has increased the WAF no end.

archived

  • Hello, I'm new here
  • Posts: 0
    • View Profile
Re: DCERouter not running
« Reply #8 on: December 13, 2006, 05:02:14 pm »
Quote from: "ajtucker"
This is one of the issues that made me give up with Pluto for the time being.  I found that DCERouter often died on my core; restarting it solved the problem of the orbiter not being able to connect.

I'm currently running MiniMyth as a front end, which has increased the WAF no end.

Hi,

maybe this info is too late for you, but anyway. In current Pluto release I also  see that DCERouter is unresponsive from time to time and even on reloads it is stucked frequently. Manually killing it's own process helps for a bit.

Pluto guys say that they fixed the problem, but it will be in next release (0.43)...

HTH,

Rob.