Author Topic: x10 with cm11a, no commands working  (Read 4971 times)

blahbla

  • Newbie
  • *
  • Posts: 11
    • View Profile
x10 with cm11a, no commands working
« on: July 11, 2010, 01:39:08 pm »
I've installed this image:
LinuxMCE-8.10-23036-i386.iso
I had to upgrade the kernel to 2.6.34 to get my tv cards working

I've then followed this guide
http://wiki.linuxmce.org/index.php/CM11

So now, I've got in the web admin under devices tree:
Core - CM11A (Device Template:CM11A #48, Device data: /dev/ttyS0) - livingroomlamp (Device Template:Light Switch (on/off) #37, Port/Channel Number: A6)

When I click "send command to device" on livingroomlamp and choose "on" in the dropdown I get this output:
Code: [Select]
Message Sent succesfully.
/usr/pluto/bin/MessageSend localhost -r 0 37 1 192 97 "" 98 ""
Response was:
RESP: OK

The light does not turn on though. If I click on the different log links there are no entries there.


Code: [Select]
havard@dcerouter:~$ cat /var/log/pluto/33_CM11A.log
05      07/11/10 8:08:57.388            Going to rotate logs... <0xb6a4fb90>
Return code: 143
3       07/11/10 12:32:53       33 (spawning-device)    Device died... count=10/50 dev=33
Sun Jul 11 12:32:53 CEST 2010 died
========== NEW LOG SECTION ==========
1       07/11/10 12:33:03       33 (spawning-device)    Starting... 11
1       07/11/10 12:33:03       33 (spawning-device)    Found /usr/pluto/bin/CM11A
05      07/11/10 12:33:03.366           Creating child 36 <0xb70fb6c0>
05      07/11/10 12:33:03.366           Note: Device manager has attached a device of type 38 that this has no custom event handler for.  It will not fire events. <0xb70fb6c0>
05      07/11/10 12:33:03.366           Note: Device manager has attached a device of type 38 that this has no custom handler for.  This is normal for IR. <0xb70fb6c0>
05      07/11/10 12:33:03.366           Creating child 37 <0xb70fb6c0>
05      07/11/10 12:33:03.366           Note: Device manager has attached a device of type 37 that this has no custom event handler for.  It will not fire events. <0xb70fb6c0>
05      07/11/10 12:33:03.366           Note: Device manager has attached a device of type 37 that this has no custom handler for.  This is normal for IR. <0xb70fb6c0>
Return code: 143
3       07/11/10 12:33:52       33 (spawning-device)    Device died... count=11/50 dev=33
Sun Jul 11 12:33:52 CEST 2010 died
========== NEW LOG SECTION ==========
1       07/11/10 12:34:02       33 (spawning-device)    Starting... 12
1       07/11/10 12:34:02       33 (spawning-device)    Found /usr/pluto/bin/CM11A
05      07/11/10 12:34:02.289           Creating child 36 <0xb71416c0>
05      07/11/10 12:34:02.289           Note: Device manager has attached a device of type 38 that this has no custom event handler for.  It will not fire events. <0xb71416c0>
05      07/11/10 12:34:02.289           Note: Device manager has attached a device of type 38 that this has no custom handler for.  This is normal for IR. <0xb71416c0>
05      07/11/10 12:34:02.289           Creating child 37 <0xb71416c0>
05      07/11/10 12:34:02.289           Note: Device manager has attached a device of type 37 that this has no custom event handler for.  It will not fire events. <0xb71416c0>
05      07/11/10 12:34:02.289           Note: Device manager has attached a device of type 37 that this has no custom handler for.  This is normal for IR. <0xb71416c0>
01      07/11/10 13:13:59.027           Failed sending address. <0xb613eb90>
01      07/11/10 13:28:05.375           Failed sending address. <0xb613eb90>
01      07/11/10 13:29:20.878           Failed sending address. <0xb613eb90>


I'm a noob in the ubuntu and linuxmce world so I don't really know what to do next, anybody have any suggestions?
« Last Edit: July 11, 2010, 01:41:26 pm by blahbla »

blahbla

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: x10 with cm11a, no commands working
« Reply #1 on: July 12, 2010, 09:33:21 pm »
Kind of weird thing happened here. I installed heyu and that works but with 100% cpu usage. Did a reboot, now one of two configured x10 devices worked via linuxmce. Then I tried heyu, that worked with all devices. The one lamp in linuxmce x10 stopped working after heyu started. Even if I stop heyu it won't be controled by linuxmce anymore, so guess I need a reboot.

Is it possible to run any commands directly to the linuxmce X10 stuff in the terminal (like heyu)?
Any way to use heyu in linuxmce instead?

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5549
  • DOES work for LinuxMCE.
    • View Profile
Re: x10 with cm11a, no commands working
« Reply #2 on: July 12, 2010, 09:50:06 pm »
No. The system isn't designed around duct tape.

-Thom

blahbla

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: x10 with cm11a, no commands working
« Reply #3 on: July 15, 2010, 11:53:15 pm »
The linuxmce x10 is working.

I have put up a simple motor (Add A Motor 80) with a appliance module (on/off) attached to it to open and close my curtain.
However I need to send on and then off after the motor has stopped so it is ready to be run again by a new on signal.

Is there a device template for this? or will I need to use a scenario?

Looked at the scenario bit but didn't find any way to have it sleep for a specified time before it sends the next command.
I could of course send first an Off command then an On command, but that would mean theres always electricity on the motors so I would like to avoid that.

Marie.O

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3675
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: x10 with cm11a, no commands working
« Reply #4 on: July 16, 2010, 08:34:39 am »
I guess an appliance switch is not the right switch to control the motor. Try to find a "SW10 Wall Mounted Shutter Switch" and add it to the system as a drape switch. That will probably do the trick.

blahbla

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: x10 with cm11a, no commands working
« Reply #5 on: July 16, 2010, 01:25:10 pm »
It wasn't there on my system.

This is what I tried:
I went to the web admin pages. "Show devices tree" - "Core" - "CM11A" - Create child device - pick device template.
then I browsed through "Device Template"

Marie.O

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3675
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: x10 with cm11a, no commands working
« Reply #6 on: July 16, 2010, 01:56:30 pm »
It wasn't there on my system.

This is what I tried:
I went to the web admin pages. "Show devices tree" - "Core" - "CM11A" - Create child device - pick device template.
then I browsed through "Device Template"

I might have been a bit unclear.

The DeviceTemplate to install would be the Drapes Switch. The hardware device you need to install is a SW10 or similar X10 device.

blahbla

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: x10 with cm11a, no commands working
« Reply #7 on: July 16, 2010, 02:36:40 pm »
Sorry, I misunderstood then.
I don't think this will be a practical solution for me because I have no place to put it without major work in the apartment.

I have the behaviour I want working with heyu, just a simple shell script:
Code: [Select]
#!/bin/sh
heyu on A3
sleep 5s
heyu off A3

heyu isn't working all that well on linuxmce though as it uses 100% cpu. Also it seems whatever runs a x10 command first of linuxmce or heyu gets the serial port until next reboot.