Asus M3N78-VM Audio via HDMI use to work

[ajdaniels63]

I just did a fresh install of the system. My MD's are M3N78-VM and I use to be able to get video and audio via HDMI. Now for whatever reason, it stopped working.

My config is the same as before when it use to work. Here is the parameters:

Alsa: 1.0.23
nvidia: 195 (installs by default)

New install, things I had to change:
For some reason xorg.conf showed "device" as "vesa" and not "nvidia" This fixed my inability to pick U2 (fixed)

I use to just setup the MD and download/compile/install the new alsa via script, go into alsamixer and unmute everything and reboot. Viola, audio over HDMI worked. Now it is not working.

Any idea's anyone? Everything I use to have to change looks right.

Thanks,

Tony

Couple screen shots:

root@moon33:~# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC1200 Analog [ALC1200 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: ALC1200 Digital [ALC1200 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


root@moon33:~# aplay -L
null
    Discard all samples (playback) or generate zero samples (capture)
front:CARD=NVidia,DEV=0
    HDA NVidia, ALC1200 Analog
    Front speakers
surround40:CARD=NVidia,DEV=0
    HDA NVidia, ALC1200 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
    HDA NVidia, ALC1200 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
    HDA NVidia, ALC1200 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
    HDA NVidia, ALC1200 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
    HDA NVidia, ALC1200 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=NVidia,DEV=0
    HDA NVidia, ALC1200 Digital
    IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
    HDA NVidia, NVIDIA HDMI
    HDMI Audio Output


root@moon33:~# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.23.
Compiled on Jun  7 2010 for kernel 2.6.27-17-generic (SMP).
root@moon33:~# cat /proc/asound/devices
  0: [ 0]   : control
  1:        : sequencer
  4: [ 0- 0]: hardware dependent
  7: [ 0- 3]: hardware dependent
 16: [ 0- 0]: digital audio playback
 17: [ 0- 1]: digital audio playback
 19: [ 0- 3]: digital audio playback
 24: [ 0- 0]: digital audio capture
 25: [ 0- 1]: digital audio capture
 26: [ 0- 2]: digital audio capture
 33:        : timer

[tkmedia]

Have you checked alsamixer for a muted input IEC958 1 should be the one.




HTH

Tim

[ajdaniels63]

I ran alsamixer and get the following:

Card: HDA NVidia
Chip: Nvidia MCP77/78 HDMI
blah blah

Something I noticed that is a bit off. Where it use to say IEC958, now it shows it as "S/PDIF, S/PDIF D, and S/PDIF 1" It's never shown that before. It always showed the IEC958, etc...

Tony

[tkmedia]

hmm never seen the names before but it would be spdif 1 i would assume.

did you try un-muting them ?


Tim

[ajdaniels63]

Everything is unmuted. Still no sound.

Tony

[chrisbirkinshaw]

I find the same thing. It started happening a few days ago when I did an apt-get update. Will try to retrace my steps and get it working.

Advanced Linux Sound Architecture Driver Version 1.0.23.
Compiled on May 24 2010 for kernel 2.6.27-17-generic (SMP).

Code: [Select]

# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
  Subdevices: 2/2
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
  Subdevices: 1/1


[joerod]

I have the same motherboard and although I've been having some other issues with hd playback the hdmi sound seems to be working.  I recently did the apt-get update for the new xine, but everything still works as expected (with hdmi sound output); I can't seem to turn up or down the volume and like I said some wierd hd playback issues.  but I do get sound output.

[chrisbirkinshaw]

I spent a while looking at it but did not get anywhere. Suddenly, one day last week it worked after a reboot, but then since the last reboot it has not worked. So still no wiser...

[purps]

Is it something to do with your ALSA version guys? Is it worth trying to roll it back to a previous version, see if that does anything?