Author Topic: Controlling Somfy Blinds with a Universal RTS Interface II (Read 4047 times)

Ritmo2k · « **on:** January 30, 2009, 08:17:11 pm »

The Somfy RTS Blind Motors can be controlled via an RS232/485 port on a single RF transmitter.
The manual for their RS232 devices suggests:

Use the ASCII protocol: <!> <2 digit unit code> <Directional Command> NOTE: directional command must be capital letters.
example; to send a command for motor 3 to go up: !03U

Can anyone outline the procedure, I don't mind reading through the wiki, but I am not sure what to read? A ref to the section would be appreciated!

Thanks!

tkmedia · « **Reply #1 on:** January 30, 2009, 11:50:33 pm »

Take a look at another rs232 device template like yamaha RxvX00

It should give you an idea of what needs to be done.

HTH

Tim

Ritmo2k · « **Reply #2 on:** January 31, 2009, 07:19:19 am »

Thanks!
I have some demo units coming asap, I will post back any results...

News:

Author Topic: Controlling Somfy Blinds with a Universal RTS Interface II (Read 4047 times)

Ritmo2k

Controlling Somfy Blinds with a Universal RTS Interface II

tkmedia

Re: Controlling Somfy Blinds with a Universal RTS Interface II

Ritmo2k

Re: Controlling Somfy Blinds with a Universal RTS Interface II