Need help with rs232 tv

[tschak909]

nuh uh. that was to schema. do NOT use schema on 0710!

-Thom

[PeteK]

tschak--

got ya. 

Afkpuz, for the script, it's set up to support operation in LMCE.  $3 is the third argument when the script is run.

To run it by hand, run

Code: [Select]

20_Olevia2XX_5XXT_TV.sh 1 1 /dev/ttyS0
replacing /devttyS0 with your serial port.

If you still can't get it to work, I can post a windows executable that I wrote to test the interface.

[Afkpuz]

Sorry, I haven't been messing with this problem in a long time.  My parents ended up moving to a new house and I lost my serial cable in the process.  I've just been content to stand up and turn the TV on analog style.

[colinjones]

If all you need is the TV to power on/off, and you are using a computer connection (eg VGA) you can use DPMS signalling to do that very easily... just a thought

[Afkpuz]

I am only looking to turn the tv on and off, but this is a tv first, then a monitor.  How would one go about doing this?

[colinjones]

I am only looking to turn the tv on and off, but this is a tv first, then a monitor.  How would one go about doing this?

You can't use DPMS signalling for a normal TV connection (eg composite, component) only for computer connections like VGA, DVI, HDMI, etc...

[Afkpuz]

No, I am using the vga plug, I just meant that this is not a monitor:  it's a TV with a vga input. 

[colinjones]

Well then that's probably fine then as long as the TV supports DPMS (probably). You may have to enable DPMS support in your xorg.conf fill first. You can then create a new device template based on GSD as a child of the MD. Set up a video pipe to it. Then implement the On and Off commands with some ruby script. You can execute general shell commands by using the Ruby system command. There is a shell command called xset that allows you to control the DPMS signalling to the monitor. Thus the Ruby snippet for the GSD On command (#192 I think) is:

Code: [Select]

system "xset dpms force on"
and for the GSD Off command (#193 I think) is:

Code: [Select]

system "xset dpms force off"