Author Topic: Tv Tuner card question....Yes, another one =)  (Read 3533 times)

ytuxedo002

  • Veteran
  • ***
  • Posts: 51
    • View Profile
Tv Tuner card question....Yes, another one =)
« on: May 23, 2008, 03:57:29 am »
I just found this tv tuner card in my storage.  I have been trying to look for info on it but i have not had any luck so far.

It is a Hauppauge WinTV NTSC 37281 Rev A233.  It has FM in, TV in, Audio out, DTV/S-Vid, Line in and an IR port.  Anybody know what model this can be?  And more importantly if it'll work with LMCE??

Thanks

gazlang

  • Guru
  • ****
  • Posts: 210
    • View Profile
Re: Tv Tuner card question....Yes, another one =)
« Reply #1 on: May 23, 2008, 12:10:06 pm »
If it is supported by myth tv then you should be fine.
Best thing to do since you have the card at hand is try it for yourself. It seems like an old-ish card so chances are the drivers for it are already in the linux kernel so it may just work.

Install linux and enter mythtv setup to se if the card has been loaded
AMD Athlon 5800+ X2
Asus M2N-SLI-Deluxe
2x Corsair XMS6400 DDR2 512mb
Samsung 400GB SATA + 500GB SATA
nVidia GeForce 7300GT
Hauppauge Nova-T 500
Hauppauge PVR-500
Thermaltake low-noise 450w PSU
Thermaltake Bach Case w/ imon vfd
Fiire Remote
UIRT

cht_winston

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Tv Tuner card question....Yes, another one =)
« Reply #2 on: May 27, 2008, 03:42:47 pm »
Hi ytuxedo002,

You could try looking at the images on http://www.bttv-gallery.de/ to identify the card and get some information about the required drivers/modules but generally speaking most of the older hauppauge cards  are auto-detected by the kernel as gazlang implied.
Convergent Home Technologies Ltd
Personal Core
Asus M2NPV-VM, AMD Athlon 4200+ X2
Integrated C51PV (Nvidia 6150)
3 * 500GB NAS
2 * NIC (Marvell + Intel PCI-E pro 1000)
Hauppauge Nova-T 500
Thermaltake Lanbox Lite case
Nesteq semi-Fanless 45
HomePro Zwave Interface