Author Topic: A Couple Basic Questions  (Read 2600 times)

Clay

  • Guest
A Couple Basic Questions
« on: March 06, 2008, 04:39:25 pm »
Complete newb here, forgive me if I ask dumb questions.

I've got two questions - will LinuxMCE let me do what I want to do, and if so, what hardware/setup do I need to implement it?

First off, I've got 3 things I'd like to be able to do

1) Use as an HD DVR
2) Use as a generic media playback device
3) Set up 1 or 2 webcams to act as a baby monitor; I'd like to be able to view these from any TV or PC in the house

Now, assuming LinuxMCE will let me do this, what hardware will I need to implement?

I assume I'll need a fairly hefty machine (will Opteron 165 + 2GB RAM be enough?)

But what about having it interact with TVs, plugging in webcams, and what sort of TV Tuner or De/Encoder would I need?

Thanks in advance!

gazlang

  • Guru
  • ****
  • Posts: 210
    • View Profile
Re: A Couple Basic Questions
« Reply #1 on: March 06, 2008, 05:39:13 pm »
Hi,

You have done the right thing by asking before diving in and buying! LMCE can be hard work with the wrong hardware, but extremely easy with the right kit.
First your opteron and 2 gig is plenty enough, but check the wiki for a working mobo (most work but some may have probs)

As for your specific requirements

1. HD-DVR - LMCE at the mo only supports burning a blu-ray disc to drive, and playing from there - blu-ray discs are pretty big, so you'll need a bit of space set aside for this! .Also you will not be able to get the disc menus displayed in LMCE (this, we hope, will be rectified in future releases). However, LMCE does support up to 1080p out (so long as you have a good graphics card) - go for a nvidia 7 series as they are best supported.

2. Best generic media playback system!!

3. You need to check the wiki for tv cards that are plug and play. The best ones with an 'av in' for security cameras are the pvr-150 and pvr-500 (the latter will enable you to plug in 2 av inputs). Get a nova-t 500 for digital tv!

Getting your system to interact with a tv can be awkward to set up, but it can be done - you will need a tv with an rs232 port (that isn't specifically for maintainance) but these are limited. Instead you can buy a usb-uirt box to send ir codes to your tv.
Like I said this can be awkward to set up - I just use a fiire chief remote which has a universal ir transmitter so dont need to set LMCE to control my tv

AMD Athlon 5800+ X2
Asus M2N-SLI-Deluxe
2x Corsair XMS6400 DDR2 512mb
Samsung 400GB SATA + 500GB SATA
nVidia GeForce 7300GT
Hauppauge Nova-T 500
Hauppauge PVR-500
Thermaltake low-noise 450w PSU
Thermaltake Bach Case w/ imon vfd
Fiire Remote
UIRT