LIRC problems after upgrade (pwc solved) ....

[archived]

Hi,

after upgrade Lirc wrapper dies imediately.  I guess it's more likely that something changed in setup parameters....


it says in logs :

Code Select Expand

10 10/04/05 13:51:44.213 LIRC button: voldn will fire: 0 -106 1 90
10 10/04/05 13:51:44.213 LIRC button: VolDown will fire: 0 -106 1 90
10 10/04/05 13:51:44.213 LIRC button: VolUp will fire: 0 -106 1 89
10 10/04/05 13:51:44.213 LIRC button: recorded_tv will fire: 0 -203 1 401 29 5
10 10/04/05 13:51:44.213 LIRC button: DVD will fire: 0 -106 1 43
10 10/04/05 13:51:44.213 LIRC button: tv will fire: 0 -106 1 43 29 1
10 10/04/05 13:51:44.213 LIRC button: live_tv will fire: 0 -106 1 43 29 1
10 10/04/05 13:51:44.213 LIRC button: LiveTV will fire: 0 -106 1 43 29 1
10 10/04/05 13:51:44.213 LIRC button: Back will fire: 0 -203 1 240
10 10/04/05 13:51:44.214 LIRC button: Clear will fire: 0 -203 1 363
10 10/04/05 13:51:44.214 LIRC button: epg will fire: 0 -203 1 126
10 10/04/05 13:51:44.214 LIRC button: Guide will fire: 0 -203 1 126
10 10/04/05 13:51:44.214 LIRC button: start will fire: 0 -203 1 5 3 <%=M%>
10 10/04/05 13:51:44.214 LIRC button: Home will fire: 0 -203 1 5 3 <%=M%>
10 10/04/05 13:51:44.214 LIRC button: Music will fire: 0 -203 1 401 29 4
10 10/04/05 13:51:44.214 LIRC button: Radio will fire: 0 -106 1 43 29 6
10 10/04/05 13:51:44.214 LIRC button: Record will fire: 0 -106 1 102
10 10/04/05 13:51:44.214 LIRC button: display will fire: 0 -203 1 399
10 10/04/05 13:51:44.214 LIRC button: info will fire: 0 -203 1 399
10 10/04/05 13:51:44.214 LIRC button: Down will fire: 0 -106 1 201
10 10/04/05 13:51:44.214 LIRC button: Up will fire: 0 -106 1 200
10 10/04/05 13:51:44.214 LIRC button: Left will fire: 0 -106 1 202
10 10/04/05 13:51:44.215 LIRC button: Right will fire: 0 -106 1 203
10 10/04/05 13:51:44.215 LIRC button: ok will fire: 0 -106 1 190
10 10/04/05 13:51:44.215 Making hardware config
01 10/04/05 13:51:44.215 No SerialPort selected and no default entry found. Exiting.
Return code: 0
Tue Oct 4 13:51:44 CEST 2005 died


I've checked MD settings and I have ATI Remote Wonder remote and 'default' as infrared receiver (same settings worked under .29) ... lirc atiusb module is loaded....

Any advice or similar experience ?

Thanks in advance,

regards,

Rob.

[archived]

well.. lirc kind of shares the same fate as cx88 and ivtv. Modules were precompiled for 2.6.10 and were left out after going to 2.6.13 in the rush to make a release. I'll be making the needed changes now. I wonder where did you get the lirc modules loaded though...

[archived]

well.. lirc kind of shares the same fate as cx88 and ivtv. Modules were precompiled for 2.6.10 and were left out after going to 2.6.13 in the rush to make a release. I'll be making the needed changes now. I wonder where did you get the lirc modules loaded though...

Hi,

my problems persist also after 0.31 upgrade. I get same error in logs:

Code Select Expand

10      10/27/05 20:54:48.282           LIRC button: SkipPrior will fire: 0 -106 1 201
10      10/27/05 20:54:48.283           LIRC button: fastforward will fire: 0 -106 1 203
10      10/27/05 20:54:48.283           LIRC button: Forward will fire: 0 -106 1 203
10      10/27/05 20:54:48.283           LIRC button: Rewind will fire: 0 -106 1 202
10      10/27/05 20:54:48.283           LIRC button: Pause will fire: 0 -106 1 190
10      10/27/05 20:54:48.283           Making hardware config
01      10/27/05 20:54:48.283           No SerialPort selected and no default entry found. Exiting.


Same settings worked in 0.29. Any help ?

I have ATI Remote Wonder (USB).

Regards,

Rob.

[archived]

With kernel 2.6.13 we switched to udev (should have used it in the 1st place, instead of devfs) since devfs was removed for good. But udev creates a /dev entry called lirc0 what we don't test for. It's fixed in svn. There's also a udev rule you can add so it creates /dev/lirc/0 too, but I can't find it for the moment.

[archived]

With kernel 2.6.13 we switched to udev (should have used it in the 1st place, instead of devfs) since devfs was removed for good. But udev creates a /dev entry called lirc0 what we don't test for. It's fixed in svn. There's also a udev rule you can add so it creates /dev/lirc/0 too, but I can't find it for the moment.

hi,

thanks for info. I'd love to get LIRC going.

I'll compile svn version of LIRC_DCE. Is this enough or should I do something else ? I'd kindly ask for instuctions if further steps are necessary...

Regards,

Rob.

[archived]

Write a file called lirc.rules in /etc/udev/rules.d/ with this text in it:

Code Select Expand

KERNEL="lirc[0-9]*",    NAME="lirc/%n"then restart udev.