Author Topic: Question Pertaining to MCE USB remote  (Read 3404 times)

Rukus

  • Veteran
  • ***
  • Posts: 132
    • View Profile
Question Pertaining to MCE USB remote
« on: July 17, 2008, 05:54:21 am »
Hello All,

I'm trying to configure my Windows MCE USB2 remote to use the "More" button as a way to change tv tuners in Myth while watching television.  I normally use the Y button on my keyboard, but that's kind of annoying.  I was given the following lirc code from someone on the Ubuntu Forum, but I don't know where in LMCE I need to put it.   Can someone let me know where the code needs to be placed?   <Please see code below>

 
Code: [Select]
#
# brand:                        HP
# model no. of remote control:  TSGH-IR01
# devices being controlled by this remote: HP Slimline S3100y
#
# Derived from MCEUSB2 lircd.conf file (lircd.conf.mceusb) found at:
# https://help.ubuntu.com/community/Install_Lirc_Feisty

#
# RC-6 config file
#
# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm
#         http://home.hccnet.nl/m.majoor/pronto.pdf
#
# used by: Philips
#
#########
#
# Philips Media Center Edition remote control
# For use with the USB MCE ir receiver
#
# Dan Conti  dconti|acm.wwu.edu
#
# Updated with codes for MCE 2005 Remote additional buttons
# *, #, Teletext, Red, Green, Yellow & Blue Buttons
# Note: TV power button transmits no code until programmed.
# Updated 12th September 2005
# Graham Auld - mce|graham.auld.me.uk
#
# Radio, Print, RecTV are only available on the HP Media Center remote control
#
#
# Updated with codes for MCE 2007 Remote additional buttons
# Visualization, Aspect, SlideShow, Eject
# Note:
# Renamed some buttons: DVD->DVDMenu, More->MoreInfo, Star->Asterisk, Hash->Pound
# Note:
# Blue, Yellow, Green, Red, and Teletext buttons do not exist on the HP remote

begin remote

  name        mceusb
  bits                 16
  flags  RC6|CONST_LENGTH
  eps                  30
  aeps                100

  header       2667   889
  one           444   444
  zero          444   444
  pre_data_bits        21
  pre_data        0x37FF0
  gap              105000
  toggle_bit           22
  rc6_mask    0x100000000


      begin codes

#unused by HP remote
Blue       0x00007ba1
Yellow       0x00007ba2
Green       0x00007ba3
Red       0x00007ba4
Teletext      0x00007ba5

#ba6 - bae unused
        BA6           0x00007ba6
        BA7           0x00007ba7
        BA8           0x00007ba8
        BA9           0x00007ba9
        BAA           0x00007baa
        BAB           0x00007bab
        BAC           0x00007bac
        BAD           0x00007bad
        BAE           0x00007bae

        Radio         0x00007baf
        Print         0x00007bb1

#bb2 - bb4 unused 
        BB2           0x00007bb2
        BB3           0x00007bb3
        BB4           0x00007bb4

        Videos        0x00007bb5
        Pictures      0x00007bb6
        RecTV         0x00007bb7
        Music         0x00007bb8
        TV            0x00007bb9

#bba - bbf unused
        BBA           0x00007bba
        BBB           0x00007bbb
        BBC           0x00007bbc
        BBD           0x00007bbd
        BBE           0x00007bbe
        BBF           0x00007bbf
#bc1 - bca unused
        BC1           0x00007bc1
        BC2           0x00007bc2
        BC3           0x00007bc3
        BC4           0x00007bc4
        BC5           0x00007bc5
        BC6           0x00007bc6
        BC7           0x00007bc7
        BC8           0x00007bc8
        BC9           0x00007bc9
        BCA           0x00007bca

        Eject         0x00007bcb
        SlideShow     0x00007bcc
        Visualization 0x00007bcd

#bce - bcf unused
        BCE           0x00007bce
        BCF           0x00007bcf
#bd1 - bd7 unused
        BD1           0x00007bd1
        BD2           0x00007bd2
        BD3           0x00007bd3
        BD4           0x00007bd4
        BD5           0x00007bd5
        BD6           0x00007bd6
        BD7           0x00007bd7

        Aspect        0x00007bd8
        Guide         0x00007bd9
        LiveTV        0x00007bda
        DVD           0x00007bdb
#NoGap
        Back          0x00007bdc
        OK            0x00007bdd
        Right         0x00007bde
        Left          0x00007bdf
        Down          0x00007be0
        Up            0x00007be1
#NoGap
        Star          0x00007be2
        Hash          0x00007be3
#NoGap
        Replay        0x00007be4
        Skip          0x00007be5
        Stop          0x00007be6
        Pause         0x00007be7
        Record        0x00007be8
        Play          0x00007be9
        Rewind        0x00007bea
        Forward       0x00007beb
#NoGap
        ChanDown      0x00007bec
        ChanUp        0x00007bed
        VolDown       0x00007bee
        VolUp         0x00007bef
#NoGap
        More          0x00007bf0
        Mute          0x00007bf1
        Home          0x00007bf2
        Power         0x00007bf3
#NoGap
        Enter         0x00007bf4
        Clear         0x00007bf5
#NoGap
        Nine          0x00007bf6
        Eight         0x00007bf7
        Seven         0x00007bf8
        Six           0x00007bf9
        Five          0x00007bfa
        Four          0x00007bfb
        Three         0x00007bfc
        Two           0x00007bfd
        One           0x00007bfe
        Zero          0x00007bff
      end codes

end remote


Core/Generic Hybrid MD
Motherboard: ASUS M2N-SLI Deluxe AM2 NVIDIA nForce 570 SLI MCP ATX
CPU: AMD Athlon 64 X2 6000+ Windsor 3.0GHz Socket AM2 125W Dual-Core
GPU: GPU: XFX PVT84GUDF3 GeForce 8600 GTS 256MB 128-bit GDDR3

freymann

  • Douchebag
  • Guru
  • *
  • Posts: 380
    • View Profile
Re: Question Pertaining to MCE USB remote
« Reply #1 on: July 17, 2008, 02:00:44 pm »
I'm trying to configure my Windows MCE USB2 remote to use the "More" button as a way to change tv tuners in Myth while watching television.  I normally use the Y button on my keyboard, but that's kind of annoying.  I was given the following lirc code from someone on the Ubuntu Forum, but I don't know where in LMCE I need to put it.   Can someone let me know where the code needs to be placed? 

The info you have is for LIRC and if I'm not mistaken, LMCE doesn't use LIRC in the same way MythBuntu does.

When I was trying to get my MCE Transceivers to work, I did stumble across a post that talked about setting up LIRC and the configs.

I believe you may find some relevant information here:

http://forum.linuxmce.org/index.php?topic=4901.msg28630#msg28630

and here:

http://wiki.linuxmce.org/index.php/Add_support_for_new_remote_controls

But for the 'stock' configuration, I'm not sure if that's the correct way to try and remap the MCE keys. I'd be interested in hearing how you make out.