hello, I have a Asus N2MPV-VM acting as a dedicated core. The external NIC is connected to my cable modem and the internal NIC connected to a Netgear DGS 2208 switch. This setup worked perfectly with MCE 7.04 but after I did a clean install to 7.10 by installing Kbuntu 7.10 AMD and then the 2 cd 7.10 MCE I cannot seem to get the internal NIC to work. The indicator lamp does not light on the internal NIC or on the switch and I just cannot figure out why this internal lan port is inactive under the 7.01 version. In the MCE launch Manager under the view IP Adresses it lists the following info:
External_Iface=eth1
External_mac=00:18:E7:16:F8:07
External_IP= 68:3:33:91
External_Netmask=255.255.240.0
External Dhcp=1
Internal_Iface=eth0
Internal_Mac=00:1B:FC:CB:88:88
Internal_Ip=192.168.80.1
Internal_netmask=255.255.255.0
Gateway=68.3.32.1
DNS1=68.105.28.11
DNS2=68.105.28.12
In the MCE browser under Network Settings Advanced tab I see this:
Advanced | Network settings
EXTERNAL_IFACE eth1
EXTERNAL_MAC 00:18:E7:16:F8:07
EXTERNAL_IP 68.3.33.91
EXTERNAL_NETMASK 255.255.240.0
EXTERNAL_DHCP 1
INTERNAL_IFACE eth0
INTERNAL_MAC 00:1B:FC:CB:88:88
INTERNAL_IP 192.168.80.1
INTERNAL_NETMASK 255.255.255.0
GATEWAY 68.3.32.1
DNS1 68.105.28.11
DNS2 68.105.28.12
Domain Computer name
DHCP server on Core:
Enable DHCP server
Range of IP addresses for Pluto devices: ... - ...
Provide IP addresses for anonymous devices not in Pluto's database.
Range of IP addresses for non-Pluto devices: ... - ...
Number of network adapters: 2
Your core has the following network adapters:
1. External network card eth1
Obtain an IP address from DHCP
Use a static IP address
Core's IP address: ...
Subnet mask: ...
Gateway: ...
Nameserver (DNS) #1: ...
Nameserver (DNS) #2: ...
2. Internal network card eth0
IP address: ...
Subnet mask: ..
The launch manager log shows this:
05 05/23/08 14:09:17.069 =>initialize_Connections() <0x2b39ffc964 b0>
05 05/23/08 14:09:17.258 Opening DB connection.. <0x2b39ffc964b0>
05 05/23/08 14:09:17.285 Successful <0x2b39ffc964b0>
05 05/23/08 14:09:17.286 Running query: "SELECT PK_Device FROM De vice WHERE FK_DeviceTemplate=7" <0x2b39ffc964b0>
05 05/23/08 14:09:17.287 Detected core as device #1 <0x2b39ffc964 b0>
05 05/23/08 14:09:17.287 Running query: "SELECT PK_Device FROM De vice LEFT JOIN DeviceTemplate ON FK_DeviceTemplate=PK_DeviceTemplate WHERE FK_De vice_ControlledVia=1 AND FK_DeviceCategory IN (
" <0x2b39ffc964b0>
05 05/23/08 14:09:17.288 Query: "SELECT PK_Device FROM Device LEF T JOIN DeviceTemplate ON FK_DeviceTemplate=PK_DeviceTemplate WHERE FK_Device_Con trolledVia=1 AND FK_DeviceCategory IN (
" returned no records <0x2b39ffc964b0>
05 05/23/08 14:09:17.288 Running query: "SELECT PK_Device FROM De vice LEFT JOIN DeviceTemplate ON FK_DeviceTemplate=PK_DeviceTemplate WHERE FK_De vice_ControlledVia= AND FK_DeviceCategory IN (2, 3, 5)" <0x2b39ffc964b0>
01 05/23/08 14:09:17.288 Error executing query <0x2b39ffc964b0>
01 05/23/08 14:09:17.288 Statement error <0x2b39ffc964b0>
01 05/23/08 14:09:17.288 Database says: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'AND FK_DeviceCategory IN (2, 3, 5)' at line 1 Driver says: QMYSQL3: Unable to execute query <0x2b39ffc964b0>
05 05/23/08 14:09:17.288 Trying to reopen DB connection <0x2b39ff c964b0>
the Pluto DHCP log shows this:
/var/log/pluto/PlutoDHCP.log (End)
The DCE router log shows this:
2 05/23/08 14:11:09 /usr/pluto/bin/Spawn_DCERouter.sh (server) Writing Version: 2.0.0.44
1 05/23/08 14:11:09 /usr/pluto/bin/Spawn_DCERouter.sh (server) Starting DCERouter
========== NEW LOG SECTION ==========
1 05/23/08 14:11:09 DCERouter (server) Starting... 1
Fri May 23 14:11:09 MST 2008 Starting
05 05/23/08 14:11:10.809 Socket::ReceiveData 0x792210 failed, byt es left 0 start: 150000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 7 Incoming_Conn Socket 7 127.0.0.1 <0x43806950>
05 05/23/08 14:11:10.809 Socket::ReceiveString2 ReceiveData faile d m_Socket: -1 Incoming_Conn Socket 7 127.0.0.1 <0x43806950>
05 05/23/08 14:11:10.809 TCPIP: Closing connection to -1 (Router Dev #0) 0x792210 m_Socket: -1 <0x43806950>
05 05/23/08 14:11:10.809 Router::RemoveAndDeleteSocket 0x792210 - 1 <0x43806950>
05 05/23/08 14:11:11.327 Loaded plug-in device: 3 master device: 10 -- ./File_Grids_Plugin.so <0x2ab1285a3e80>
05 05/23/08 14:11:11.370 Loaded plug-in device: 4 master device: 27 -- ./General_Info_Plugin.so <0x2ab1285a3e80>
05 05/23/08 14:11:11.387 Loaded plug-in device: 5 master device: 31 -- ./Climate_Plugin.so <0x2ab1285a3e80>
05 05/23/08 14:11:11.403 Loaded plug-in device: 6 master device: 9 -- ./Datagrid_Plugin.so <0x2ab1285a3e80>
05 05/23/08 14:11:11.436 Loaded plug-in device: 7 master device:
This is the fifth Time that i have tried to install 7.01 with out success I even tried the 386 version with no luck, but MCE 704 works flawlessly. I hope that one of one of you MCE wizards can point me in the proper direction....
Thank you for your help
Fillister
