Author Topic: Disk I/O problem  (Read 3924 times)

dfwcouple

  • Newbie
  • *
  • Posts: 6
    • View Profile
Disk I/O problem
« on: May 28, 2008, 09:41:31 pm »
I have tried to install this media center on 2 PC's both AMD and Intel, with both SATA and IDE harddrives. I have downloaded the ISO twice and the burnt it with 2 different softwares. I keep on getting I/O errors on install. I formated one of the SATA HD with windows and still did not get it to work. where am I going wrong. the motherboards are ECS and ASUS both about a year old with a GB of ram on each.

radmofo

  • Veteran
  • ***
  • Posts: 94
    • View Profile
Re: Disk I/O problem
« Reply #1 on: May 28, 2008, 09:59:07 pm »
Are you using the DVD iso? I would suggest burning the disk with another burner at a very slow rate. Other than that I'm at quite a loss at the moment.

dfwcouple

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Disk I/O problem
« Reply #2 on: May 29, 2008, 12:10:15 am »
 :-\ I just went out and got a mv2-mx se by asus and I also picked up a dual core amd 64 5200 with one gig of hd space sata and it still failed.

pigdog

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1105
    • View Profile
Re: Disk I/O problem
« Reply #3 on: May 29, 2008, 01:24:35 am »
Hi.  First I'd like to know if you ran an MD5SUM check on the disks that you downloaded.

Then, can you explain what your failure was?

What happened?  When?

I would like to help but I don't know what the problem is.

Marper

  • Guru
  • ****
  • Posts: 183
    • View Profile
Re: Disk I/O problem
« Reply #4 on: May 29, 2008, 04:46:01 am »
Had the same problem.  When I finally bured the ISO to disk at 4x, all worked well and I was able to install.  Burning the ISO at 6x or 8x causes problems.

Hoe that helps

dfwcouple

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Disk I/O problem
« Reply #5 on: May 29, 2008, 10:07:17 pm »
I am going to down load the 64 bit version and try this again.

dfwcouple

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Disk I/O problem
« Reply #6 on: May 29, 2008, 11:26:21 pm »
I final got a good 32 bit DVD now I am going to work on a 64 bit DVD. I hope all this pain is worth it. LOL well I will keep progress on this forum.