News:

Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com

Main Menu

Couple of concerns

Started by jdilorenzo, September 04, 2007, 04:54:23 AM

Previous topic - Next topic

jdilorenzo

I'm thinking about building a system which will provide media and phone services for two houses.  Here are the specs I have in mind for the core and media directors:

Core
P4 2.4
1GB of ram
single 300GB IDE HD
1 PVR-150
1 PVR-500 (two tuners)
Firewire to cablebox

Media Directors
AMD XP 2100+
512 MB RAM
GF 6 series video cards

Concern #1 is that the core won't be beefy enough (horsepower or disk access) to serve 4 media directors.  Let's say for the sake of argument that everything will be SD content and the worst case scenario is 2 media directors watching recorded content, 1 watching live content, and a program being recorded simultaneously.  What do you think?

Concern #2, the houses are at opposite sides of the street, so the only option is wireless.  I'm planning on using pre 802.11n equipment to create a wireless bridge between the two houses.  I'm  not sure what speed the link will run, but after some research, my best guess is between 45-100 Mb.  Will this amount of bandwidth be enough for two MD and an IP phone at the remote house?

Thanks!


dopey

Your core is beefy enough, but you might run out of disk space quickly.

You'll have serious problems getting the wireless to work at such a great distance. It would be possible to get one maybe two sd recording to go over that distance with special line of site equipment (the tin can hack) and a booted radio signal (dd-wrt), but I wouldn't attempt it unless you really know what you're doing.

tagno25

Quote from: dopey on September 04, 2007, 05:07:45 AM
You'll have serious problems getting the wireless to work at such a great distance. It would be possible to get one maybe two sd recording to go over that distance with special line of site equipment (the tin can hack) and a booted radio signal (dd-wrt), but I wouldn't attempt it unless you really know what you're doing.
you can use wireless products designed for a WISP like the ones offered at wisp-router.com
they will be 802.11b or g because 802.11n is not ratified