"PXE-E77: Bad or missing discovery server list".

[darkwizard864]

I did lastest update as of 8/31 and now all my mds say "PXE-E77: Bad or missing discovery server list".
and exit out.
were can I look to find why it is doing this before I format hdd and start over

[phenigma]

There have been no changes to anything in the main repository related to pxe booting.  There are changes coming but they're are not in the main repository yet.  The atftpd server outputs to syslog.

J.

[darkwizard864]

my syslog I did not see any errors with pxe part here is my syslog

[darkwizard864]

I can get it to boot default only with http://rom-o-matic.net/gpxe/gpxe-git/gpxe.git/contrib/rom-o-matic/build.php
witch is odd

[phenigma]

Please post the contents of /etc/dhcp/dhcpd.conf

[darkwizard864]

here it is

[phenigma]

So you're using the shadow repo, not the main repo.  That's really important information that you should have shared in your initial post.  Koffel you need to provide much better data.

This *could* have something to do with data added to support the raspberry pi pxe boot method and if that's the case it will affect *some* pcs that try to pxe boot.  While I did test that pc based pxe booting works properly, I have a limited amount of hardware to test.

Try replacing /usr/pluto/templates/dhcpd.conf.tmpl with the following: http://paste.ubuntu.com/23124954/ and let me know what happens please.

J.

[darkwizard864]

it seemed to work
thank you phenigma

[phenigma]

What did you do with the file?  What did you do after putting it in place?

[darkwizard864]

sorry I ran wrong one
I ran dhcp_config.sh and it seemed to work after that
thank you phenigma

[G.I.R.]

Hello,

i had the same problem after updating. (Version: 2.0.0.47.201607240235+899786ab)
I also tried the new diskless raspberry pi method before this happened.
So i don`t know what confused my system.

With the provided dhcpd.conf.tmpl and with running  /usr/pluto/bin/DHCP_config.sh, it is working again.

Thanks for the solution!!

[Marie.O]

There have been fixes for this in. pluto-bootscript should now be at least 201609 something for precise or trusty.

[phenigma]

As posde indicates there is a fix for this in the repository now.  I've tested this now with multiple PCs and PXE booting PCs and RPis should both be working.  Keep in mind that the rpi foundation considers PXE booting to be very much in beta stage.  All said it's working well here.