Cannot boot from PXE

[electric_flesh]

Hello friends,


I hope you can help me with this issue:

1.- Ive set the Diskless MD PC to boot from PXE. The HDD is out.

2.- Ive created the Image using the admin web interface at the Core. Appeared "finished setting up diskless Media Directors".

3.- I boot the MD PC (client), Appear "booting vmlinuz..." and all that stuff. The MD has its own IP adress and all seems to be ok, but the screens shows:

Begin: Running /scripts/nfs-premount...
Done.

4.- I wait for about 5 minutes (or more) and the screens shows "connect: connection timed out". So, a cannot boot the MD Diskless




Please hel me.. what can i do? i cant find and answer on forums, please, i want to donate to the project, but i need to know how to make it work. Thanks for your help.

Regards from Santiago de Chile.

[Techstyle]

Did you run:

/usr/pluto/bin/Diskless_CreateTBZ.sh

on the core before setting up the MD?

[electric_flesh]

Yes, i did it through the web admin. The image was created successfully.... but it still shows "connection timed out".
.... :S

[phenigma]

Welcome to LMCE!

You will need to open a terminal on the Core and run:

Code: [Select]

sudo /usr/pluto/bin/Diskless_CreateTBZ.sh

before your diskless MD will be able to boot.

J.

[electric_flesh]

Ok,

I did "sudo /usr/pluto/bin/Diskless_CreateTBZ.sh" an the core,  the last output lines says:


"

Code: [Select]

####Installing pluto-orbiter
Reading package lists... Done
Building dependency tree... Done
Package pluto-orbiter is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source
E: Package pluto-orbiter has no installation candidate
#### Package pluto-orbiter faile (/tmp/tmp.FbivP29837)


The core computer is connected to the Internet trought a switch and then and DSL router, but if i use Konqueror, the Internet isnt working for me.

It is necessary to be connected to the internet to get the Netboot image working?

[phenigma]

Yes, you will need an active internet connection on the core when you run Diskless_CreateTBZ.sh.

J.

[electric_flesh]

It wanst necessary to be connected to the Internet.

At he end, the MDs were taken a lot of time to boot from PXE because my ethernet switch wasnt working good. I replaced the switch and the MDs boot very fast.

Problem solved.


Thanks a lot!