- Welcome to LinuxMCE Forums.
News:
Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com
Recent posts
#61
Users / Re: Possible Q Orbitor Issues
Last post by CentralMedia - January 10, 2019, 06:45:29 PMNo knowledge on Andriod development.
If I install the Eclipse IDE, would it work to launch the app and debug?
Got an error today, "Screen Error Click Return".
If I install the Eclipse IDE, would it work to launch the app and debug?
Got an error today, "Screen Error Click Return".
#62
Users / Re: Possible Q Orbitor Issues
Last post by CentralMedia - January 10, 2019, 03:13:30 PMThe bridge is an ethernet to wireless bridge, which is on the lnmce internal network (192.168.80.0/24). I have all the phones on the lnmce internal network. I have two access points, separate ssd's, one on the lnmce internal network and one on the pfsense network. All the testing I doing now, is on the lnmce internal network.
I cleared the settings and restarted the app, but not luck.
I am going to check the wiki and create a new qorbitor on the core, maybe it's something I did incorrectly there. I just went under orbitor, create qorbitor and followed the instructions
I cleared the settings and restarted the app, but not luck.
I am going to check the wiki and create a new qorbitor on the core, maybe it's something I did incorrectly there. I just went under orbitor, create qorbitor and followed the instructions
#63
Users / Re: Possible Q Orbitor Issues
Last post by Gavlee - January 08, 2019, 10:37:48 AMFrom the information provided, my guess is it's either a network configuration problem or something to do with the Android versions. I haven't tried QOrbiter on Android 8 yet, though I don't see why there would be a network problem like this if the QOrbiter works otherwise, It has worked for me from android 4.x ish.
I have had a similar problem with the QOrbiter running and showing the main screen but not any devices like lights etc. I do not remember what the problem was but I remember my network config was different then, most things seems to work in the QOrbiter for me at the moment but I have the bridge connected to the internal LMCE network not off my router box like yourself.
If I were you I would run pcap or wireshark or some packet sniffer on the device and core if you can, also check the pfsense/firewall logs while the QOrbiter is connecting. Doing that may show if any traffic is being sent and not receiving a reply and may help diagnose the problem.
Only other thing I can think of is removing the settings files QOrbiter creates (on the android device) and starting over.
Can't think of much else at the moment.
I have had a similar problem with the QOrbiter running and showing the main screen but not any devices like lights etc. I do not remember what the problem was but I remember my network config was different then, most things seems to work in the QOrbiter for me at the moment but I have the bridge connected to the internal LMCE network not off my router box like yourself.
If I were you I would run pcap or wireshark or some packet sniffer on the device and core if you can, also check the pfsense/firewall logs while the QOrbiter is connecting. Doing that may show if any traffic is being sent and not receiving a reply and may help diagnose the problem.
Only other thing I can think of is removing the settings files QOrbiter creates (on the android device) and starting over.
Can't think of much else at the moment.
#64
Users / Re: hdmi cec control player
Last post by phenigma - January 06, 2019, 12:50:37 AMVery nice! I also have mixed CEC and non CEC devices, it's great to control then all from a single remote!
Sent from my Pixel using Tapatalk
Sent from my Pixel using Tapatalk
#65
Users / Re: hdmi cec control player
Last post by CentralMedia - January 05, 2019, 11:40:29 PMYes it is
Got it to work. Input switches, and controls the kodi device as expected. The cable box is not hdmi cec controllable, but when I switch to that, it works via infrared. On to the other setup in the bedroom, which I have a theory on why it does not work
Got it to work. Input switches, and controls the kodi device as expected. The cable box is not hdmi cec controllable, but when I switch to that, it works via infrared. On to the other setup in the bedroom, which I have a theory on why it does not work
#66
Users / Re: Possible Q Orbitor Issues
Last post by CentralMedia - January 05, 2019, 11:36:20 PMI do not have a /var/www/lmce-admin/skins at all.
Ok thanks, so that rules out that theory
Getting puzzled how you have this set up
Can I ask more about the network config please, by the sounds of it you have this working before? What changed?
Haven't had it working at all, since I setup the Qorbitor. It shows lights, media, etc. but when you click on it, it shows no scenarios within each.
The QOrbiter is hanging off a wifi access point on the pfsense box and also on the internal network? Please clarify because this seems a bit contradictory if the Qorbiter is trying to access the core going through the 'external' IP address, say 192.168.1.x.
What is providing the DHCP to the QOrbiter, the pfsense box or the lmce core?
The phones with the qorbitor is on the wifi, connected to lnmce network 192.168.80.0/24. Getting an IP from that network. Also have an ethernet to wireless bridge , connected to the same wifi access point, which the gc-100 is broadcasting and a firetv has a wired connection to. Both work, so the internal network (lnmce) works.
The orbitor connects fine. You see the options light, media, security, etc. But you don't see any scenarios for the lights or within media
Ok thanks, so that rules out that theory
Getting puzzled how you have this set up
Can I ask more about the network config please, by the sounds of it you have this working before? What changed?
Haven't had it working at all, since I setup the Qorbitor. It shows lights, media, etc. but when you click on it, it shows no scenarios within each.
The QOrbiter is hanging off a wifi access point on the pfsense box and also on the internal network? Please clarify because this seems a bit contradictory if the Qorbiter is trying to access the core going through the 'external' IP address, say 192.168.1.x.
What is providing the DHCP to the QOrbiter, the pfsense box or the lmce core?
The phones with the qorbitor is on the wifi, connected to lnmce network 192.168.80.0/24. Getting an IP from that network. Also have an ethernet to wireless bridge , connected to the same wifi access point, which the gc-100 is broadcasting and a firetv has a wired connection to. Both work, so the internal network (lnmce) works.
The orbitor connects fine. You see the options light, media, security, etc. But you don't see any scenarios for the lights or within media
#67
Users / Re: Possible Q Orbitor Issues
Last post by Gavlee - January 04, 2019, 03:47:47 PMI do not have a /var/www/lmce-admin/skins at all.
Getting puzzled how you have this set up
Can I ask more about the network config please, by the sounds of it you have this working before? What changed?
The QOrbiter is hanging off a wifi access point on the pfsense box and also on the internal network? Please clarify because this seems a bit contradictory if the Qorbiter is trying to access the core going through the 'external' IP address, say 192.168.1.x.
What is providing the DHCP to the QOrbiter, the pfsense box or the lmce core?
There are probably a lot of different ways to set this up.
The way I have seen to do this are as follows:
1. wifi off your pfsense box
you will need rules and nat set up properly, maybe even port forwarding, if you get this to work please post how, i tried this method and think i hit the same issues as you did but that was a while ago.
2. wifi access point/bridge in the internal network
how I have currently, some docs on lmce wiki and elsewhere how to set up a wifi bridge
3. VPN
I have had this working on and off but the default config needs some small tweaks I think, which is scattered all over the forums and web.
this require set up VPN in android or the device connecting to a interface that has the udp 500 port forwarded to the lmce ext interface. the android device will appear as on the internal network 192.168.80.x once connected through the encrypted tunnel. as a bonus one can have this on 3g/4g roaming and access your lmce network from outside by QOrbiter / SIP/ lmce-admin / orbiter etc.
Probably more ways but getting this crystal clear what you plan to do may allow more help. The VPN route is best and most secure IMHO but needs some love in the default config, especially for android.
HTH some
Gav
Getting puzzled how you have this set up
Can I ask more about the network config please, by the sounds of it you have this working before? What changed?
The QOrbiter is hanging off a wifi access point on the pfsense box and also on the internal network? Please clarify because this seems a bit contradictory if the Qorbiter is trying to access the core going through the 'external' IP address, say 192.168.1.x.
What is providing the DHCP to the QOrbiter, the pfsense box or the lmce core?
There are probably a lot of different ways to set this up.
The way I have seen to do this are as follows:
1. wifi off your pfsense box
you will need rules and nat set up properly, maybe even port forwarding, if you get this to work please post how, i tried this method and think i hit the same issues as you did but that was a while ago.
2. wifi access point/bridge in the internal network
how I have currently, some docs on lmce wiki and elsewhere how to set up a wifi bridge
3. VPN
I have had this working on and off but the default config needs some small tweaks I think, which is scattered all over the forums and web.
this require set up VPN in android or the device connecting to a interface that has the udp 500 port forwarded to the lmce ext interface. the android device will appear as on the internal network 192.168.80.x once connected through the encrypted tunnel. as a bonus one can have this on 3g/4g roaming and access your lmce network from outside by QOrbiter / SIP/ lmce-admin / orbiter etc.
Probably more ways but getting this crystal clear what you plan to do may allow more help. The VPN route is best and most secure IMHO but needs some love in the default config, especially for android.
HTH some
Gav
#68
Developers / Re: VLC Player status - multi-...
Last post by Marie.O - January 03, 2019, 10:48:41 PMJust check it out, and see if it works like you want it to work. VLC Player itself IS in the repo and I am using it as my primary video player.
#69
Developers / Re: VLC Player status - multi-...
Last post by Whitten - January 03, 2019, 04:39:23 PMQuote from: tschak909 on March 27, 2017, 08:29:21 PM
I have turned my health around with these probiotics and checked in the code, and prepared a merge request to master...but polly needs to finish working on gitlab before it can go through... as soon as it goes through, and we get a package, i'll make an announcement that it can be selected.
-Thom
What's the status on this btw? Did it ever go through?
#70
Users / Re: Possible Q Orbitor Issues
Last post by CentralMedia - January 03, 2019, 01:14:51 AMI am running 14.04. Downloaded the apk from the LNMCE admin page and installed it, had to set to unknown sources to do the install.
I have it running on S7 and a OnePlus 3, their Andriod Version is 8.0. Had it on a Fire Tablet also, the one for the kids, that currently stopped working over the weekend. All were on the external network, 192.168.80.0/24. I have also tested it on the external network, as the core is not connected directly to my internet source, it's behind a pfsense box on the lan. I disabled the firewall for the external interface when I installed the system earlier last yr.
When I launch the Qribtor, I see nothing under the tabs for lights, media, for the room which has lights and an MD (raspberry). For lights, I don't see the on/off scenario tab.
Is it possible for you to check see if you anything in the following
/var/www/lmce-admin/skins/
Also if you get the message I am getting, which I am getting, when I click lights for example
requested missing file: 1.png <0x92483b40>
If it's the same as my own, nothing, then that quickly rules out that as cause.
I have it running on S7 and a OnePlus 3, their Andriod Version is 8.0. Had it on a Fire Tablet also, the one for the kids, that currently stopped working over the weekend. All were on the external network, 192.168.80.0/24. I have also tested it on the external network, as the core is not connected directly to my internet source, it's behind a pfsense box on the lan. I disabled the firewall for the external interface when I installed the system earlier last yr.
When I launch the Qribtor, I see nothing under the tabs for lights, media, for the room which has lights and an MD (raspberry). For lights, I don't see the on/off scenario tab.
Is it possible for you to check see if you anything in the following
/var/www/lmce-admin/skins/
Also if you get the message I am getting, which I am getting, when I click lights for example
requested missing file: 1.png <0x92483b40>
If it's the same as my own, nothing, then that quickly rules out that as cause.