Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - tompin2

Pages: 1 ... 6 7 [8] 9
Please don't state "latest snapshot" but the version number of the snapshot

Sorry, it's true, the snapshot was LMCE-1004-20120630133526148

I already found how to solve it by using this post,12418.0.html  on the ZOTAC MAG.  I trying on the ZBOX and post results


It is a bit of a pain. I am working on fixing it all.
apt-get install linux-backports-modules-alsa-`uname -r`
This will get them listed (aplay -l | grep -i 'hdmi')

You will likely have hw0 devices 3,7,8, and 9. It is almost always 3 or 7 on the id41, and seems to be completely random which. Others output on 9... others output on everything. Should look something like:
Code: [Select]
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
card 0: NVidia [HDA NVidia], device 7: NVIDIA HDMI [NVIDIA HDMI]
card 0: NVidia [HDA NVidia], device 8: NVIDIA HDMI [NVIDIA HDMI]
card 0: NVidia [HDA NVidia], device 9: NVIDIA HDMI [NVIDIA HDMI]
You can test with:
Code: [Select]
speaker-test -c 2 -l 1 -t sine -D hw:0,7etc based on the output of aplay where the 0 is the card and 7 is the device.

Now getting that to stick is another trick. In /usr/pluto/templates/asound.conf I would replace %MAIN_CARD% with 0,7    or whatever yours is.
pcm.asym_hdmi {
        type asym
        playback.pcm "hdmi_playback"
        capture.pcm "plughw:%MAIN_CARD%"

You may also have to add
options snd-hda-intel model=auto  or
options snd-hda-intel enable_msi=0 index=-2
to /etc/modprobe.d/alsa-base

Please report back with your results.

Hi L3,
I decided to upgrade the core and start all from scratch.  I downloaded the latest snapshot (yesterday) and video is no issue for neither MAG or ZBOX, It is the audio that is driving me crazy.  On the MAG, I get audio with speaker test, and also within the multimedia kde controle module, but no sound at all when playing the videos, not even if the video is open directly at the kde desktop.  With the ZBOX, I get no sound until I run the speaker test.  Once I run the speakertest at the konsole, everything works perfect.  Any hints?


Hi Tompin2

thanks fior the info.

Please can you just confirm what versions of alsa & Nvidia you are using in the ID41.


Hi Bushtech,

When I got it running (I'll explain that later), I got it running with Alsa 1.25 and Nvidia 295.   The alsa that came with the snapshot I used came with Alsa 1.22 and that one did not detected the nvidia hda at all.  After upgrading to 1.25 , it got listed as it should in aplay.  When I got it running means that I did apt get upgrade last week and rebuild the image for the zotac mag and worked perfectly.  I am doing apt upgrade tonight and going to try rebuilding the image ID41 and see how it handles audio and video.

I hope this info helps.  Keep everyone posted on how it goes.




I guess someone went ahead of me because the problem is fixed.  After doing (today) apt-get upgrade at the core and image rebuild of the zotac mag.  Video issues are corrected!

Greate Job!!!!  Was it you L3mce????

For the  hdmi sound I guess it is better to start a new post so people is not confused or lost by this post subject but in a few words I can mention what I did.

1. Figure out which port was for HDMI sound.  Check xorg log to understand hdmi "monitor" capabilities, in my case for for the MAG was no issue, for the ZBOX it was because I have a DENON receiver so the nvidia driver did not detected HDMI audio capabilities on him.
In my case device 7 was the one used for hdmi audio, like L3mce mentioned.  I modified the asound template under user pluto and that was it.  Of course that before that I did some testing to make sure that device 7 was the one.
I erased the line "options snd-hda-intel model=auto " at the modprobe/alsa-base.conf because it was causing problems with the asound.conf file.  Disabled the Intel audio board at the bios so only the NVIDIA HDA was seen.  Also for the zotac ZBOX I needed to update the alsa drivers because it was not recognize at the begining.  If anyone have any questions I will try to do my best to share my little knowledge

Ill try to post (if necesary) a new post with detailed step by step.



Dear Followers of this post.  I'm making a step by step guide to get the sound working.  With some information from the web and help with LMCE gurus, I will try to do a for dummy's guide (like me ;) ).  This guide will solve sound issues and video hopefully.  On the next reply.



Hi L3mce,

I guess I got the info too late  ;D, I guess I fix it the hard way, since I had nothing to do last night until 1 am for the next feeding of my son (2 weeks old) I decided to make a drastic test, just like the zbox

Code: [Select]
sudo apt-get --purge remove nvidia-*
KBOOM! nvidia!

Code: [Select]
sudo sh
Reboot, after it, avwizard was displayed, follow it without any problems and voila!.  Did the same with the zbox and both are working perfectly (video issues,  alpha and opengl tricks etc), the audio @ the zbox will try it later.

I tried the zsync without success, it dumped an error (did not record it, sorry) and started downloading the entire image again.!  That is when I decided to wipe nvidia stuff and start from scratch!.  I hope this helps other.  I´m willing to do more test if you want in order to help as much as possible for MAG AND zboxes for future users and snapshots.



This would be me.

So, both of these boxes were working in 0810, and now neither work on 1004? That is definitely not news I want to hear.

At this moment in time, you do not need to update your own driver manually. It does what it needs to do, based on what is needed, though HDMI audio might requre a little massage (it also upgrades your alsa version) based on requirements.
If you would, please, ssh into the core, and sudo ssh moonXX (where XX is the MD number) and just copy and paste the following into each MD and pastebin or post the results here.

Code: [Select]
lspci -nn | grep VGA
grep 'Driver' /etc/X11/xorg.conf
apt-cache policy pluto-nvidia-drivers
apt-cache policy nvidia-glx-260

Lastly, how did you install? Snapshot or network? If snapshot, please note which one. Did you change any of the settings in web admin?

You do not need to revert to 810. I will get you up and running. If you want to drop into IRC I can get you going in short order, but I need to figure out why this is not happening automagically.

l3mce, Here are the results for the MAG, do you need for the zbox even tough
 video is working?
Code: [Select]
root@moon51:/home/linuxmce# lspci -nn | grep VGA
03:00.0 VGA compatible controller [0300]: nVidia Corporation ION VGA [10de:087d] (rev b1)

root@moon51:/home/linuxmce# grep 'Driver' /etc/X11/xorg.conf
    Driver         "mouse"
    Driver         "kbd"
    Driver         "nvidia"

root@moon51:/home/linuxmce# apt-cache policy pluto-nvidia-drivers
W: Unable to locate package pluto-nvidia-drivers
root@moon51:/home/linuxmce# apt-cache policy nvidia-glx-260     
  Installed: 260.19.29-0ubuntu1
  Candidate: 260.19.29-0ubuntu1
  Version table:
 *** 260.19.29-0ubuntu1 0
        500 lucid/beta2 Packages
        100 /var/lib/dpkg/status

Thanks l3mce,

One quick question, do I have to to this on the router also, what about the other md (the MAG), should I do the zsync? Will this correct the video issues?
I'll try the hdmi audio changes and keep you posted. 

Thanks for all your help.


Hi Karel and L3mce,

Last night I was sooo tired that I didn't had the energy to write the entire story, so Ill try to explain a little bit more for education purpose only ;)

ZOTAC ZBOX model :1d41
ZOTAC MAG  Ill get this info later

Installation of the core was from a snapshot, Ill get the number later, Im not at home yet.  What I really did is that the Core was updated/upgraded several times until last week when I started doing both md's.   Both md's were image rebuild twice just to make sure it was done with the latest upgrades.

What where the issues:
MAG: no video playback unter UI V2, also no screensaver available (moving background images), the rest worked perfectly.  Sound via HDMI by only selecting it on the wizard, no issues during the entire process of the wizard.  Downgrading the UI to v1 I was able to watch videos but only one :S, if I try to load another, the video box was gone

ZBOX: same as above except no audio.

Both machines played video perfectly within KDE

I left the MAG as control box and started messing up with the zbox.  Last night after upgrading nvidia drivers to 295 It did nothing to solve the video problem until I did something else, apt-get upgrade last night, it did upgraded something else because I got again the avwizard and after it.  Video is perfect.  I believe it was not related to the upgrade, I believe it was related to running the avwizard after upgrading the video drivers.  I will try to do the same with the MAG (but I will get l3mce info first, sounds interesting, before erasing the evidence!.)
After manually upgrading ALSA to 1.25, aplay and mixer sees nvidia, unmuted all the channels but still no sound.  I guess Im closer to success, I hope!

As soon as I get back home Ill post the scripts results and details.



Dear Friends,

Finally after making the big decision of migrating to 1004 (from a working 810)  :-\  I am facing some issues with the video playback.  The problem is that (on both) there is no video playback, only sound, I only the the black square box where the video should be playing.  If I go to KDE desktop, xine and mplayer works perfectly.  I found that if I change the ui orbiter from v2 to v1 without alpha blend and open gl stuff I get the video output  but if I mess it up by fw or rw it will go away until Quick Reload the router.   Any hints???
As feedback to all, for the zotac MAG installation was completely smooth, even hdmi audio during avwizard but for the ZBOX im still fighting with the hdmi audio.  Hopefully by updating alsa from 1.22 to 1.25 fill fix the problem because the card is not even detected by aplay.

Video playback issues are not corrected by updating video drivers.  I installed 295 at the zbox and the problem is persistent
DENON 2311 via usb-serial cable was plug&play detected and also LG LCD screen.  

I guess I will have to go back to 810 before my wife kills me.  Before she hated the "geek" stuff by having all videos  and home automation on the TV, now she can't live without it!!!... so she continues complaining hahahahaha.... who can understand them... :S!



Thanks Kyfalcon,

I would 1004 a try but is there a painless migration?....  I guess that's a self answer question, I can already hear all the forum saying...... "There is no Painless action within LMCE and Linux!!!!". 
If I go 1004, do I have to setup all from scratch? Will I loose all my media?



Thanks Seth!!!!.  I was able to login.  It was a repositories issue.  I updated and update/ upgrade without problems.  Now the issue is that once it reboots, I get no error but I can only see black screen with the cursor, I can move it but there is nothing to do.  Maybe trying to run the installation scripts could solve this.   Thanks again, the link was perfect!

Dear All,

Just to share a little bit of what is going on and to understand better LMCE.  I had successfully install LMCE on a ZOTAC MAG as an MD.  Works perfect if you get VDPAU working.  This time I wanted to setup another MD but this time it is a ZBOX with more cpu juice!

The problem I'm getting is that I don't get to the av wizard due to some issue with the nvidia driver but I could not see it, it continues scrolling during boot and gets locked under samba service started.  It is not really locked, if I press enter, it goes to the login.  Then here comes the interesting part.  When logged as linuxmce I can't do anything.  If I do whoami, it says I'm sambahelper and I don't know the passwd for it.  I´m unable to install anything because linuxmce does not have the rights.  If I do sudo, it asks for the sambahelper passwd.  WHO IS SAMBAHELPER!, is not helping at all.  I can start the xserver but can't do anything because of the rights of linuxmce user.  Any hints?.  Does root has a password? or Sambahelper?.  Where can I get the boot log to see why it failed to install the nvidia drivers?


Installation issues / Re: Update/upgrade MD's from core not internet?
« on: June 11, 2011, 07:15:28 am »
Dear All I´m very happy to see people interested on this topic, I really wish I could understand Linux more to help, I just dropped the idea but you guys are amazing  :o, for me you are all talking in another language but I'm starting to learn little by little.

Keep up the good work, I wish I could bring the beers for moral support but I guess it will be a little bit difficult.



Installation issues / Re: Update/upgrade MD's from core not internet?
« on: June 03, 2011, 03:27:42 am »
Thanks to all, Im not good in linux but I will give it my best.  Maybe I find something usefull for all.  The way I see it is that I see an option under webadmin that you could just click to the MD page and update/upgrade, maybe it is not possible, maybe it is.  For now, a good script should be a good progress.  I hope I get the knoledge soon to make my own script and share it to all.

I will Keep all posted.


Pages: 1 ... 6 7 [8] 9