Messages

31

Developers / Re: MythTV .25 and the New MythTV Services API = Greater Stability for LMCE ?

« on: April 30, 2012, 08:42:17 pm »

Without a doubt, the Live TV/ PVR stability is one thing that causes me the most headaches. I can live with those instabilities as I am a very technical person. My wife on the other hand has been very patient with reboots and no TV because I am not home. In the past month I have tried XBMCbuntu, and Mythbuntu and although they both may have a better UI they are both lacking in how effective LinuxMCE can be as a whole house entertainment/control system. I currently am using my own bastardized version of myth that supports the Ceton capture card. @ times things work ok, but more often than not I need to restart live tv when channel changing fails. I would love to see VDR support for the CETON card. I know the ceton card supports IPTV so it may not be that difficult. I can't pledge to much as far as programming is concerned, simply because I have a 2 year old and a 1 year old. I can however test the hell out of things and quite possibly do some debug work, as I have been able to familiarize myself with players and plugins with the help of Thom and some others.  With Golgoj great work on the UI, I think this is the next black cloud hanging over LMCE.

32

Developers / Re: MythTV .25 and the New MythTV Services API = Greater Stability for LMCE ?

« on: April 25, 2012, 09:03:40 pm »

That's pretty effing nice!

33

Installation issues / Re: AV Wizard does not run - 10.04

« on: April 17, 2012, 08:21:15 pm »

Yeah, got my fat arse stuck in that hole. I had it working fine in the past and then my system blew up and had to back up from clonzilla. The problem being that I cloned my system before I got the HDMI working. So what I did was rebuild the alsa drivers etc (24). Added the parts to asound,conf and to sound.conf in the modprobe.d directory. At this point I am able to get sound trough HDMI as I can listen to Sirius radio through my stereo from command prompt. I then comment out all updates in SetupAudioVideo.sh that changes asound.conf. i then call for rerun of AVWizard. When I pick HDMI I get no sound. If I ctrl-alt F2 and log in alsamixer shows my NVIDIA and I have sound through HDMI at the command prompt.

34

Developers / Re: A note about the work I have been doing.

« on: April 17, 2012, 08:11:03 pm »

Wasn't meaning to annoy you Langston  I understand what you are going through. I have 2 projects within LMCE I am working on. The problem I have is a 2 year old and a 9 month old. My wife and friends call LMCE 'the system', the good thing is my wife knows how to pretty much get around and get things back working when they freeze up or crash, i.e. MythTV.   Once again keep up the great work, and by all means pat each other on the back, just no kissing! 

35

Installation issues / Re: AV Wizard does not run - 10.04

« on: April 16, 2012, 07:22:02 pm »

Ok loaded it. The AVWizard comes up but when I choose HDMI I get no sound in AVWizard. I have sound from command prompt and mythtv.

36

Developers / Re: A note about the work I have been doing.

« on: April 16, 2012, 07:19:59 pm »

Will you 2 quit patting each other on the back and get this stuff working!  On a serious note good work.

37

Developers / Re: QOrbiter: Updated

« on: April 13, 2012, 08:44:00 pm »

This will be so cool! Can't wait to get my hands on it:)

Can you disable effects? First thing my GF will ask is to turn off the spinning icons...

Give her a diamond ... she will forget all about those spinning icons. 

38

Installation issues / Re: AV Wizard does not run - 10.04

« on: April 13, 2012, 03:48:33 pm »

I will give it a go tonight. One question. I do not want to update any of the mythtv stuff, since I am running my own version of .24 fixes with cable card support. What is the easiest way of doing this?


thanks,
Kevin

39

Installation issues / Re: AV Wizard does not run - 10.04

« on: April 12, 2012, 07:16:05 pm »

That is my fault.

The next build should be resolved. Sorry for the confusion. In the meantime you can replace your /usr/pluto/bin/Utils.sh file with this.

Code: [Select]

#!/bin/bash

if [[ -n "$HEADER_Utils" ]]; then
    return 0
fi
HEADER_Utils=included

. /usr/pluto/bin/SQL_Ops.sh
. /usr/pluto/bin/Config_Ops.sh

DEVICETEMPLATE_OnScreen_Orbiter=62
DEVICEDATA_Use_OpenGL_effects=172
DEVICEDATA_Use_alpha_blended_UI=169
DEVICEDATA_PK_UI=104

function AddBookmark {
    return 0
    Url="$1"
    Name="$2"

    [[ ! -f /home/public/bookmarks.html ]] || return 0

    # Generate an id for this bookmark
    ID=$(echo "$Url" | sha1sum)
    ID='rdf:#$'${ID:0:6}

    # Generate the bookmark entry
    Bookmark='   <DT><A HREF="'$Url'" ADD_DATE="1126869382" LAST_MODIFIED="1126869442" ID="'$ID'">'$Name'</A>'
    Bookmark=$(echo $Bookmark | sed 's/"/\\\"/g')

    for BookmarksFile in /home/public/bookmarks.html /home/user_*/bookmarks.html ;do
        # See if the bookmark is already there
        if grep -q "ID=\"$ID\"" $BookmarksFile ;then
            continue
        fi

        # Add the bookmark string to the file
        awk '
            BEGIN { HR=0 }
            HR==0 && /<HR>/ {print "'"$Bookmark"'"; HR=1}
            {print}
        ' $BookmarksFile > $BookmarksFile.$$
        mv $BookmarksFile.$$ $BookmarksFile
    done

}

function DelBookmark {
    return 0
    Url="$1"
    Name="$2"

    [[ ! -f /home/public/bookmarks.html ]] || return 0

    # Generate an id for this bookmark
    ID=$(echo "$Url" | sha1sum)
    ID='rdf:#$'${ID:0:6}
   
    for BookmarksFile in /home/public/bookmarks.html /home/user_*/bookmarks.html ;do
        grep -v "ID=\"$ID\"" $BookmarksFile >> $BookmarksFile.$$
        mv $BookmarksFile.$$ $BookmarksFile
    done
}

TranslateSerialPort()
{
    local SearchFor="$1"
    local PCI USB

    SerialPort=
    if [[ "$SearchFor" == pci* ]]; then
        if [[ -d /sys/class/tty ]]; then
            pushd /sys/class/tty &>/dev/null
            for dev in ttyUSB*/device ttyACM*/device; do
                id=$(readlink -f "$dev" | sed -r 's,^.*(pci.*)/usb[0-9]*/[0-9./-]*/[0-9]*-([0-9.]*):[0-9.]*(/ttyUSB[0-9]*)?$,\1+\2,g')
                if [[ "$id" == "$SearchFor" ]]; then
                    SerialPort="/dev/$(dirname "$dev")"
                    break;
                fi
            done
            popd &>/dev/null
        fi
    else
        SerialPort="$SearchFor"
    fi

    builtin echo "$SerialPort"
}

TranslateSoundCard()
{
    local SoundCard="$1" AlsaCard=
    local PCI USB
    local Cards Card Dev

    if [[ -d /sys/class/sound && "$SoundCard" == pci* ]]; then
        if [[ "$SoundCard" == *+* ]]; then
            PCI="${SoundCard%+*}"
            USB="${SoundCard#*+}"
        else
            PCI="${SoundCard}"
            USB=
        fi
        pushd /sys/class/sound &>/dev/null
        Cards=$(find -name 'controlC*')
        for Card in $Cards; do
            Card="${Card#./}"
            Dev=$(readlink "$Card/device"|cut -f3 -d/)
            if [[ -n "$USB" ]]; then
                if [[ "$Dev" == *"$PCI"*usb*"$USB:"* ]]; then
                    AlsaCard="${Card#controlC}"
                    break
                fi
            else
                if [[ "$PCI" == *"$Dev" ]]; then
                    AlsaCard="${Card#controlC}"
                    break
                fi
            fi
        done
        popd &>/dev/null
    fi

    builtin echo "$AlsaCard"
}

UseAlternativeLibs()
{
    export LD_LIBRARY_PATH=/opt/libsdl/lib:/opt/libxine/lib:/opt/libsdl1.2-1.2.7+1.2.8cvs20041007/lib:/opt/linphone-1.3.5/lib
}

function ListTemplates_Category {
    local FK_DeviceCategory_Parent="$1"
    local PK_DeviceTemplate_List=""
    local PK_DeviceCategory=""
    local PK_DeviceTemplate=""

    R=$(RunSQL "SELECT PK_DeviceCategory FROM DeviceCategory WHERE FK_DeviceCategory_Parent = $FK_DeviceCategory_Parent")
    for PK_DeviceCategory in $R ;do
        PK_DeviceTemplate_List="$PK_DeviceTemplate_List $(ListTemplates_Category "$PK_DeviceCategory")"
    done

    R=$(RunSQL "SELECT PK_DeviceTemplate FROM DeviceTemplate WHERE FK_DeviceCategory=$FK_DeviceCategory_Parent")
    for PK_DeviceTemplate in $R ;do
        PK_DeviceTemplate_List="$PK_DeviceTemplate_List $PK_DeviceTemplate"
    done

    echo $PK_DeviceTemplate_List
}


FindDevice_Template()
{
    local PK_Device_Parent="${1//\'}" FK_DeviceTemplate="${2//\'}" NoRecursion="$3" IncludeParent="$4" All="$5"
    local Limit Found=0

    if [[ -z "$PK_Device_Parent" || -z "$FK_DeviceTemplate" ]]; then
        echo ""
        return 1
    fi

    if [[ -z "$All" ]]; then
        Limit="LIMIT 1"
    fi

    local i R Q
    if [[ "$PK_Device_Parent" == 0 ]]; then
        Q="
            SELECT PK_Device
            FROM Device
            WHERE FK_Device_ControlledVia IS NULL AND FK_DeviceTemplate IN ($FK_DeviceTemplate)
            $Limit
        "
    elif [[ -z "$IncludeParent" ]]; then
        Q="
            SELECT PK_Device
            FROM Device
            WHERE FK_Device_ControlledVia='$PK_Device_Parent' AND FK_DeviceTemplate IN ($FK_DeviceTemplate)
            $Limit
        "
    else
        Q="
            SELECT PK_Device
            FROM Device
            WHERE (FK_Device_ControlledVia='$PK_Device_Parent' OR PK_Device='$PK_Device_Parent') AND FK_DeviceTemplate IN ($FK_DeviceTemplate))
            $Limit
        "
    fi
    R="$(RunSQL "$Q")"

    if [[ -n "$R" ]]; then
        echo "$R"
    fi

    if [[ ( -z "$R" || -n "$All" ) && -z "$NoRecursion" ]]; then
        Q="SELECT PK_Device FROM Device WHERE FK_Device_ControlledVia='$PK_Device_Parent'"
        R="$(RunSQL "$Q")"
        for i in $R; do
            if FindDevice_Template "$i" "$FK_DeviceTemplate" "" "" "$All"; then
                if [[ -z "$All" ]]; then
                    return 0
                else
                    Found=1
                fi
            fi
        done
    else
        return 1
    fi

    [[ "$Found" -eq 1 ]]
    return $?
}

FindDevice_Category()
{
    local PK_Device_Parent="${1//\'}" FK_DeviceCategory="${2//\'}" NoRecursion="$3" IncludeParent="$4" All="$5"
    local Limit Found=0

    if [[ -z "$PK_Device_Parent" || -z "$FK_DeviceCategory" ]]; then
        echo ""
        return 1
    fi

    if [[ -z "$All" ]]; then
        Limit="LIMIT 1"
    fi

    local i R Q
    if [[ "$PK_Device_Parent" == 0 ]]; then
        Q="
            SELECT PK_Device
            FROM Device
            JOIN DeviceTemplate ON FK_DeviceTemplate=PK_DeviceTemplate
            WHERE FK_Device_ControlledVia IS NULL AND FK_DeviceCategory IN ($FK_DeviceCategory)
            $Limit
        "
    elif [[ -z "$IncludeParent" ]]; then
        Q="
            SELECT PK_Device
            FROM Device
            JOIN DeviceTemplate ON FK_DeviceTemplate=PK_DeviceTemplate
            WHERE FK_Device_ControlledVia='$PK_Device_Parent' AND FK_DeviceCategory IN ($FK_DeviceCategory)
            $Limit
        "
    else
        Q="
            SELECT PK_Device
            FROM Device
            JOIN DeviceTemplate ON FK_DeviceTemplate=PK_DeviceTemplate
            WHERE (FK_Device_ControlledVia='$PK_Device_Parent' OR PK_Device='$PK_Device_Parent') AND FK_DeviceCategory IN ($FK_DeviceCategory)
            $Limit
        "
    fi
    R="$(RunSQL "$Q")"

    if [[ -n "$R" ]]; then
        echo "$R"
    fi

    if [[ ( -z "$R" || -n "$All" ) && -z "$NoRecursion" ]]; then
        Q="SELECT PK_Device FROM Device WHERE FK_Device_ControlledVia='$PK_Device_Parent'"
        R="$(RunSQL "$Q")"
        for i in $R; do
            if FindDevice_Category "$i" "$FK_DeviceCategory" "" "" "$All"; then
                if [[ -z "$All" ]]; then
                    return 0
                else
                    Found=1
                fi
            fi
        done
    else
        return 1
    fi

    [[ "$Found" -eq 1 ]]
    return $?
}

# Get the device number for the parent of the given device
# Returns: number or empty string
GetDeviceParent()
{
    local PK_Device="$1"
    Q="
        SELECT FK_Device_ControlledVia
        FROM Device
        WHERE PK_Device='$PK_Device'
    "
    local R=$(RunSQL "$Q")
   
    if [[ "$R" == NULL ]]; then
        R=""
    fi
    echo "$R"
}

# Delete a device and make its children top level
# Does exactly the same thing as CMD_Delete_Device in General_Info_Plugin
DeleteDevice()
{
    local PK_Device="$1"
    local Q R

    # Delete embedded devices
    Q="SELECT PK_Device FROM Device where FK_Device_RouteTo=$PK_Device"
    R=$(RunSQL "$Q")
    for Device in $R; do
        DeleteDevice "$Device"
    done

    local -a Queries
    Queries=(
        "UPDATE Device SET FK_Device_ControlledVia=NULL WHERE FK_Device_ControlledVia=$PK_Device"
        "DELETE FROM Device WHERE PK_Device=$PK_Device"
        "DELETE FROM CommandGroup_Command WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_Command WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_CommandGroup WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_DeviceData WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_DeviceGroup WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_Device_Related WHERE FK_Device=$PK_Device OR FK_Device_Related=$PK_Device"
        "DELETE FROM Device_EntertainArea WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_HouseMode WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_Orbiter WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_StartupScript WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_Users WHERE FK_Device=$PK_Device"
        "DELETE FROM Package_Device WHERE FK_Device=$PK_Device"
        "DELETE FROM PaidLicense WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_Device_Pipe WHERE FK_Device_From=$PK_Device OR FK_Device_To=$PK_Device"
        "DELETE FROM PaidLicense WHERE FK_Device=$PK_Device"
    )

    for Q in "${Queries[@]}"; do
        RunSQL "$Q"
    done
}

XineConfSet()
{
    local Setting="$1"
    local Value="$2"
    local XineConf="${3:-/etc/pluto/xine.conf}"
   
    [[ -z "$Setting" || -z "$Value" ]] && return 1
   
    if grep -qF "$Setting" "$XineConf"; then
        sed -i "s/^.*$Setting:.*$/$Setting:$Value/" "$XineConf"
    else
        echo "$Setting:$Value" >>"$XineConf"
    fi
}

DeviceIsDisabled()
{
    local PK_Device="$1"
    local R Q

    [[ -z "$PK_Device" ]] && return 1

    Q="SELECT COUNT(*) FROM Device WHERE PK_Device='$PK_Device' AND Disabled=0"
    R=$(RunSQL "$Q")

    if [[ -n "$R" && "$R" -eq 0 ]]; then
        return 0 # Device is disabled or does not exist at all
    else
        return 1 # Device exists and is enabled
    fi
}

FindInArray()
{
    local Value="$1" Array i
    shift
    Array=("$@")
   
    for ((i = 0; i < ${#Array[*]}; i++)); do
        if [[ "${Array[$i]}" == "$Value" ]]; then
            echo "$i"
            return 0
        fi
    done
    return 1
}

FindInArray_Prefix()
{
    local Value="$1" Array i
    shift
    Array=("$@")

    for ((i = 0; i < ${#Array[*]}; i++)); do
        if [[ "${Array[$i]}" == "$Value"* ]]; then
            echo "$i"
            return 0
        fi
    done
    return 1
}

# Verify that the given string is a valid IPv4
ValidIP()
{
    local IP="$1"

    local IPn="[0-9]{1,3}"
    local IPpattern="^($IPn)\\.($IPn)\\.($IPn)\\.($IPn)$"
    local i Number

    # Bash 3.1 requires $IPpattern to be quoted, otherwise it gives a syntax error
    # Bash 3.2 requires $IPpattern to be unquoted, otherwise it fails to match the pattern
    # Ubuntu has Bash 3.2
    if [[ ! "$IP" =~ $IPpattern ]]; then
        return 1
    fi

    for ((i = 1; i <= 4; i++)); do
        Number="${BASH_REMATCH[$i]}"
        if ((Number < 0 || Number > 255)); then
            return 1
        fi
    done

    return 0
}

# Colors and bolds messages
# '\E begin escape sequence
# [XX; is the text color
# XXm' is the background color
# \033 is the an escape
# [1m bold     [0m unbold
# "" around text   '' around color
# COLOR         FOREGROUND      BACKGROUND
# black         30              40
# red           31              41
# green         32              42
# yellow        33              43
# blue          34              44
# magenta       35              45
# cyan          36              46
# white         37              47

StatusMessage () {
    echo -e '\E[33;40m'"\033[1m  $* \033[0m"
}
ErrorMessage () {
    echo -e '\E[33;41m'"\033[1m  $* \033[0m"
}
NotifyMessage () {
    echo -e '\E[32;40m'"\033[1m  $* \033[0m"
}

confirmRoot () {
    testroot="`whoami`"
    if [ "$testroot" != "root" ]; then
        ErrorMessage "Need to be root to run. Exiting"
        exit 1
    fi
}

StartService() {
ServiceDescription="$1"
ServiceCmd="$2"
ServiceBkg="$3"
    if [[ -x $(echo $ServiceCmd | cut -d ' ' -f1) ]] ;then
        if [ -x /bin/plymouth ]; then
            /bin/plymouth update --status="$ServiceDescription ... "
        fi
        echo -n "$ServiceDescription ... "
            if [[ "$ServiceBkg" == "&" ]] ;then
                $ServiceCmd 1>/dev/null 2>/dev/null &
            else
                $ServiceCmd 1>/dev/null 2>/dev/null
            fi
            err=$?
            if [[ "$err" == "0" ]] ;then
                echo "ok"
            else
                echo "fail"
            fi
    fi
        return $err
}

GetVideoDriver () {
        vga_pci=$(lspci -v | grep -i 'VGA')
        prop_driver="vesa"
        chip_man=$(echo "$vga_pci" | grep -Eo '(ATI|VIA|nVidia|Intel)')
        case $chip_man in
                nVidia)
                prop_driver="nvidia" ;;
                ATI)
                            prop_driver="fglrx"
                        if echo "$vga_pci" | grep -Ei '((r5|r6|r7)|(9|X|ES)(1|2?)([0-9])(5|0)0|Xpress)'; then
                                prop_driver="radeon"; fi ;;

                Intel)
                        prop_driver="intel"
                        if echo $vga_pci | grep "i740"; then
                                prop_driver="i740"; fi
                        if echo $vga_pci | grep "i128"; then
                                prop_driver="i128"; fi ;;

                VIA)
                        prop_driver="openchrome" ;
            if echo $vga_pci | grep -i "Savage"; then
                prop_driver="savage"; fi
            #if echo $vga_pci | grep -i "s3"; then
                #prop_driver="via"; fi
            if echo $vga_pci | grep -i "virge"; then
                                   prop_driver="virge"; fi ;;
        *)
            prop_driver="vesa"
        esac

}

InstallVideoDriver () {
    case "$prop_driver" in
            nvidia)
            if ! PackageIsInstalled nvidia-glx && ! PackageIsInstalled nvidia-glx-new && ! PackageIsInstalled nvidia-glx-71 && ! PackageIsInstalled nvidia-glx-96 && ! PackageIsInstalled nvidia-glx-173 && ! PackageIsInstalled nvidia-glx-180 && ! PackageIsInstalled nvidia-glx-190 && ! PackageIsInstalled nvidia-glx-195 && ! PackageIsInstalled nvidia-glx-260 && ! PackageIsInstalled nvidia-glx-185 && ! PackageIsInstalled nvidia-current; then
                apt-get -yf install pluto-nvidia-video-drivers
                VerifyExitCode "Install Pluto nVidia Driver"
                nv_pid=$(pidof nvidia-install.sh)
                    if [[ -n $nv_pid ]] ; then
                        StatusMessage "Installing nVidia driver this may take a few minutes"
                        installCorrectNvidiaDriver
                    else StartService "Installing nVidia driver this may take a few minutes" ". /usr/pluto/bin/nvidia-install.sh"
                        installCorrectNvidiaDriver
                    fi
            fi ;;
        nouveau)
            if ! PackageIsInstalled xserver-xorg-video-nouveau; then
                apt-get -yf install xserver-xorg-video-nouveau
                VerifyExitCode "Install nouveau Driver"
            fi ;;
        radeon)
            if ! PackageIsInstalled xserver-xorg-video-radeon; then
                apt-get -yf install xserver-xorg-video-radeon
                VerifyExitCode "Install radeon Driver"
            fi ;;
        fglrx)
            if ! PackageIsInstalled fglrx; then
                apt-get -yf install fglrx
                VerifyExitCode "Install fglrx Driver"
            fi ;;
        intel)
            if ! PackageIsInstalled xserver-xorg-video-intel; then
                apt-get -yf install xserver-xorg-video-intel
                VerifyExitCode "Install Intel Driver"
            fi ;;
        i128)
            if ! PackageIsInstalled xserver-xorg-video-i128; then
                apt-get -yf install xserver-xorg-video-i128
                VerifyExitCode "Install i128 Driver"
            fi ;;
        i740)
            if ! PackageIsInstalled xserver-xorg-video-i740; then
                apt-get -yf install xserver-xorg-video-i740
                VerifyExitCode "Install i740 Driver"
            fi ;;
        openchrome)
            if ! PackageIsInstalled xserver-xorg-video-openchrome; then
                apt-get -yf install xserver-xorg-video-openchrome
                VerifyExitCode "Install opencrhome Driver"
            fi ;;
        savage)
            if ! PackageIsInstalled xserver-xorg-video-savage; then
                apt-get -yf install xserver-xorg-video-savage
                VerifyExitCode "Install VIA Savage Driver"
            fi ;;
        via)
            if ! PackageIsInstalled xserver-xorg-video-s3; then
                apt-get -yf install xserver-xorg-video-s3
                VerifyExitCode "Install VIA S3 Driver"
            fi ;;
        virge)
            if ! PackageIsInstalled xserver-xorg-video-s3virge; then
                apt-get -yf install xserver-xorg-video-s3virge
                VerifyExitCode "Install VIA S3 Virge Driver"
            fi ;;
                esac
    if [[ "$chip_man" == "Intel" ]] && [[ -z $online ]]; then
        if ! PackageIsInstalled "libva-driver-i965"; then
            apt-get -yf install libva-driver-i965
            VerifyExitCode "Install Intel Graphics Accelerator"
        fi
    fi
}

CheckVideoDriver () {
    GetVideoDriver
    online=$(ping -c 2 google.com)
    card_detail=$(lspci | grep 'VGA' | cut -d':' -f3)
    offline_mismatch=""
    if [[ -f /etc/X11/xorg.conf ]]; then
        # TODO figure out a better way to isolate the video driver in the xorg.conf list of "Driver" options
            cur_driver=$(grep "Driver" /etc/X11/xorg.conf | grep -Eo '(nvidia|nouveau|radeon|fglrx|savage|openchrome|via|virge|intel|i740|i128|vesa)')
        if [[ "$prop_driver" != "$cur_driver" ]] &&  [[ -z $online ]]; then
            offline_mismatch="true"
        elif [[ "$prop_driver" != "$cur_driver" ]] && [[ -n $online ]]; then
            offline_mismatch="false"
        fi
        # Check to see that the appropriate driver is installed by type
        # If current driver is nvidia, check that it is the correct one

        if [[ "$offline_mismatch" == "false" ]] && [[ "$cur_driver" == "nvidia" ]]; then
            StartService "Checking nVidia driver" ". /usr/pluto/bin/nvidia-install.sh"
            current_nvidia=$(getInstalledNvidiaDriver)
            preferred_nvidia=$(getPreferredNvidiaDriver)
        fi

        if [[ "$cur_driver" == "$prop_driver" ]]; then
            StatusMessage "Correct driver '$prop_driver' already loaded"
            exit 0
        # Remove fglrx or nVidia drivers if they are installed, but do not match current requirements
                elif ([[ "$offline_mismatch" == "false" ]]) || ([[ "$offine_mismatch" == "true" ]] && echo "$prop_driver" | grep -Eq '(nouveau|radeon|openchrome)'); then
                        ErrorMessage "Video chipset change detected !!!"
            if [[ "$cur_driver" == "fglrx" ]]; then
                echo ""
                echo ""
                echo ""
                ErrorMessage "Purging fglrx driver due to multiple conflicts"
                apt-get -y remove --purge xorg-driver-fglrx fglrx* --force-yes
                apt-get -y install --reinstall libgl1-mesa-glx libgl1-mesa-dri fglrx-modaliases --force-yes
                dpkg-reconfigure xserver-xorg
                apt-get -y install --reinstall xserver-xorg-core --force-yes
                rm /etc/X11/xorg.conf
                reboot
            elif [[ $cur_driver == "nvidia" ]]; then
                StatusMessage "Removing old nVidia driver"
                apt-get -yf remove $current_driver --force-yes
            fi
       
            # If there is an xorg, but the driver does not match best selection, install driver and run AVWizard
            StatusMessage "Installing video driver '$prop_driver' for $card_detail"
            InstallVideoDriver
            sleep 2
                        ConfSet "AVWizardOverride" "1"
        elif [[ "$offine_mismatch" == "true" ]]; then
            case "$prop_driver" in
                nvidia)
                    prop_driver="nouveau" ;;
                fglrx)
                    prop_driver="radeon" ;;
                savage)
                    prop_driver="openchrome" ;;
                via)
                    prop_driver="openchrome" ;;
                virge)
                    prop_driver="openchrome" ;;
            esac
            if [[ "$prop_driver" != "$cur_driver" ]]; then
                StatusMessage "Installing video driver '$prop_driver' for $card_detail"
                InstallVideoDriver
                sleep 2
                ConfSet "AVWizardOverride" "1"
            fi
                fi
        else
        # If there is no xorg.conf, install driver and run AVWizard
        if [[ -z $online ]]; then
            case "$prop_driver" in
                nvidia)
                    prop_driver="nouveau" ;;
                fglrx)
                    prop_driver="radeon" ;;
                savage)
                    prop_driver="openchrome" ;;
                via)
                    prop_driver="openchrome" ;;
                virge)
                    prop_driver="openchrome" ;;
            esac
        fi
        StatusMessage "/etc/X11/xorg.conf is missing. Installing video driver '$prop_driver' for $card_detail"
        InstallVideoDriver
        sleep 2
        ConfSet "AVWizardOverride" "1"
        fi
VideoDriver="$prop_driver"
}

ReloadDevicesOnThisMachine()
{
    for Dev in $(cat /usr/pluto/locks/pluto_spawned_local_devices.txt); do
        /usr/pluto/bin/MessageSend "$DCERouter" 0 "$Dev" 7 1 163 "Utils.sh ReloadDevicesOnThisMachine"
    done
}

OpenGLeffects()
{
    local Q

    Q="
        SELECT IK_DeviceData
        FROM Device
        LEFT JOIN Device AS Parent ON Parent.PK_Device=Device.FK_Device_ControlledVia
        JOIN Device_DeviceData ON Device.PK_Device=FK_Device
        WHERE
            Device.FK_DeviceTemplate='$DEVICETEMPLATE_OnScreen_Orbiter'
            AND (
                Device.FK_Device_ControlledVia='$PK_Device'
                OR Parent.FK_Device_ControlledVia='$PK_Device'
            )
        AND FK_DeviceData='$DEVICEDATA_Use_OpenGL_effects'
    "
    RunSQL "$Q"
}

AlphaBlendingEnabled()
{
    local Q

    Q="
        SELECT IK_DeviceData
        FROM Device
        LEFT JOIN Device AS Parent ON Parent.PK_Device=Device.FK_Device_ControlledVia
        JOIN Device_DeviceData ON Device.PK_Device=FK_Device
        WHERE
            Device.FK_DeviceTemplate='$DEVICETEMPLATE_OnScreen_Orbiter'
            AND (
                Device.FK_Device_ControlledVia='$PK_Device'
                OR Parent.FK_Device_ControlledVia='$PK_Device'
            )
        AND FK_DeviceData='$DEVICEDATA_Use_alpha_blended_UI'
    "
    RunSQL "$Q"
}

GetDeviceData()
{
    local Q
    local Device="$1" DeviceData="$2"

    Q="
        SELECT IK_DeviceData
        FROM Device_DeviceData
        WHERE FK_Device='$Device' AND FK_DeviceData='$DeviceData'
    "
    Field 1 "$(RunSQL "$Q")"
}

SetDeviceData()
{
    local Q
    local Device="$1" DeviceData="$2" Value="$3"

    Q="
        UPDATE Device_DeviceData
        SET IK_DeviceData='$Value'
        WHERE FK_Device=$Device AND FK_DeviceData=$DeviceData
    "
    RunSQL "$Q"
}

UI_SetOptions()
{
    local OrbiterDev="$1"
    local OpenGLeffects="$2"
    local AlphaBlending="$3"
    local UI_Version="$4"

    # disable OpenGL effects
    Q="
        REPLACE INTO Device_DeviceData(FK_Device, FK_DeviceData, IK_DeviceData)
        VALUES('$OrbiterDev', '$DEVICEDATA_Use_OpenGL_effects', '$OpenGLeffects')
    "
    RunSQL "$Q"
    # disable alpha blending
    Q="
        REPLACE INTO Device_DeviceData(FK_Device, FK_DeviceData, IK_DeviceData)
        VALUES('$OrbiterDev', '$DEVICEDATA_Use_alpha_blended_UI', '$AlphaBlending')
    "
    RunSQL "$Q"
    # select UI
    Q="
        REPLACE INTO Device_DeviceData(FK_Device, FK_DeviceData, IK_DeviceData)
        VALUES('$OrbiterDev', '$DEVICEDATA_PK_UI', '$UI_Version')
    "
    RunSQL "$Q"
}

function GeneratePassword() {
    #TODO: Replace with this --->  </dev/urandom tr -dc A-Za-z0-9_ | head -c8
        local -a alpha1=(Q W E R T Y U I O P A S D F G H J K L Z X C V B N M)
        local -a alpha2=(q w e r t y u i o p a s d f g h j k l z x c v b n m)
        local -a alpha3=(1 2 3 4 5 6 7 8 9 0)

        local pass=""
        pass=$pass"${alpha1[$(($RANDOM%26))]}${alpha1[$(($RANDOM%26))]}${alpha1[$(($RANDOM%26))]}"
        pass=$pass"${alpha2[$(($RANDOM%26))]}${alpha2[$(($RANDOM%26))]}${alpha2[$(($RANDOM%26))]}"
        pass=$pass"${alpha3[$(($RANDOM%10))]}${alpha3[$(($RANDOM%10))]}"

        local fromwhere=$(( $RANDOM % 3 + 1 ))
        [[ $fromwhere == 1 ]] && pass=$pass"${alpha1[$(($RANDOM%26))]}"
        [[ $fromwhere == 2 ]] && pass=$pass"${alpha2[$(($RANDOM%26))]}"
        [[ $fromwhere == 3 ]] && pass=$pass"${alpha3[$(($RANDOM%10))]}"


        for i in `seq 1 100` ;do
                local split=$(( $RANDOM % ${#pass} + 1 ))
                pass1=${pass:$split}
                pass2=${pass:0:$split}
                pass="${pass1}${pass2}"
        done

        echo $pass
}

function GeneratePasswordOf6Digits()
{
    local pass
    for ((i = 0; i < 6; i++)); do
        pass="${pass}$((RANDOM % 10))"
    done
    echo "$pass"
}

Log()
{
    local File="$1"; shift
    local Msg="$*"

    echo "LOG: $Msg"
    echo "$Msg" >>"$File"
}


function BlacklistConfFiles()
{
    local file=$1

    if [[ -e /etc/confblacklist ]] ;then
        while read line; do
            if [[ "$line" == "$file" ]] ;then
                return 0
            fi
        done < /etc/confblacklist
    fi

    return 1               
}

function VDRInstalled() {
    # Return true if VDR is installed
    DEVICETEMPLATE_VDR_Plugin="1704"
    Q="SELECT PK_Device FROM Device Where FK_DeviceTemplate = $DEVICETEMPLATE_VDR_Plugin"
    VDRDevice=$(RunSQL "$Q")                                         
    if [ "$VDRDevice" == "" ] ; then                                 
        RETURNVALUE=1                                             
    else                                                             
        RETURNVALUE=0                                             
    fi                                                               
    return $RETURNVALUE
}

Then run the following two commands.

Code: [Select]

sudo sed -i 's/InstallVideoDriver/CheckVideoDriver/g' /usr/pluto/bin/X-CleanupVideo.sh
sudo sed -i 's/InstallVideoDriver/CheckVideoDriver/g' /usr/pluto/bin/Xconfigure.sh
A regular reboot will probably then just dump you into avwizard.

Still not working for me after following those steps. Both MD and Hybrid.

40

Users / Re: Thom, Our Thoughts are with you...

« on: March 29, 2012, 01:52:04 pm »

You and your family are in my prayers!

41

Users / Re: Myth, VDR, or no TV at all...

« on: March 27, 2012, 02:24:34 am »

most likely Time-Warner, aka SATAN.

-Thom

It looks like verizon fios and comcast is available in dallas both have cci set 0 as far as i have heard.

42

Users / Re: Myth, VDR, or no TV at all...

« on: March 26, 2012, 09:34:00 pm »

After years of running MythTV, for this next installation I will be relying entirely on AV switching of the Motorola cable box.

I am interested in VDR, for sure, but it will need an unknown amount of work to get it working in the US market.

My faith in MythTV has declined exponentially, with each release of the software, between the idiotic backend protocol changes (some deliberately done to make it HARDER for systems like ours to talk to MythTV), and the ever increasing instability between badly written VDPAU code, or the fact that MythTV is slow all across the board, I'm done with MythTV. Either I will be retrofitting VDR with features we need, or a new PVR will be written from scratch.

-Thom

Thom who is your new cable provider in Dallas?

43

Users / Re: Myth, VDR, or no TV at all...

« on: March 23, 2012, 08:31:32 pm »

MythTV with a ceton 4 tuner cable card.

I would like to see us get to the point where the front end UI is all LMCE and the backend simply serves, livetv stream, guide data to the frontend. This would allow the PVR platform of your choice. I think MythTV's .25 heads in this direction. As I understand, VDR is headless system.

44

Users / Re: Android QOrbiter

« on: March 23, 2012, 03:30:19 pm »

Where is the apk for the new orbiter? I went to android market and it shows as installed. I downloaded that one several weeks ago.

45

Users / Re: Android QOrbiter

« on: March 22, 2012, 08:27:17 pm »

I will try and give it a go on my Galaxy Nexus.