31
Users / Re: eibd and lmce 10.04
« on: November 26, 2011, 01:20:18 pm »
hi, i use the command on wiki page and it work
News:
Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com
LinuxMCE sponsor
open.home.automation
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
32
Users / Re: network problem
« on: November 09, 2011, 09:21:02 pm »
I return to my previous configuration:
router wi-fi ------> eth1 ----> LMCE ------> eth0 ------> client ethernet
my problem is for the wi-fi connections because there are out of home client ethernet.
Emanuele
router wi-fi ------> eth1 ----> LMCE ------> eth0 ------> client ethernet
my problem is for the wi-fi connections because there are out of home client ethernet.
Emanuele
33
Users / Re: network problem
« on: November 08, 2011, 03:48:27 pm »
client linux, and android phone... dns are 192.168.80.1 and domain.linuxmce ...
34
Users / network problem
« on: November 08, 2011, 02:50:55 pm »
hi, i have a problem with my network, i use the 2nic configuration but now eth1 is using for pppoe
connection and eth0 for the local net. Server going on internet but the client on access point no. I try a ping test from the client to the eth0 server and it's ok, a ping from client to eth1 it's ok, but a ping from client to www.google.it isn't ok.
connection and eth0 for the local net. Server going on internet but the client on access point no. I try a ping test from the client to the eth0 server and it's ok, a ping from client to eth1 it's ok, but a ping from client to www.google.it isn't ok.
35
Users / Re: eibd and lmce 10.04
« on: November 06, 2011, 11:36:25 pm »
my problem is that using the. deb of 10.04 does not work. I had to use the 8.10 bin version.
Emanuele
Emanuele
36
Users / Re: eibd and lmce 10.04
« on: November 01, 2011, 08:24:46 pm »
mmm you build from source the template or use the .deb package?
37
Users / eibd and lmce 10.04
« on: November 01, 2011, 07:09:32 pm »
Hello i am trying lmce 10.04.
The installation went fine, but I have problems with EIB-eibd, I installed eibd and created a script to start it and it works correctly (I tested on a groupocketlisten and groupswrite).
I installed the package lmce-EIB-eibd to replace EIB, it is registred on the router, but the lights are not driven.
I followed all the recommendations of the various pages on the wiki and forums and at this point I think is a problem with the template.
Anyone try this?
Emanuele
The installation went fine, but I have problems with EIB-eibd, I installed eibd and created a script to start it and it works correctly (I tested on a groupocketlisten and groupswrite).
I installed the package lmce-EIB-eibd to replace EIB, it is registred on the router, but the lights are not driven.
I followed all the recommendations of the various pages on the wiki and forums and at this point I think is a problem with the template.
Anyone try this?
Emanuele
38
Users / Re: Anyone using or thinking of using the LeGrand BTicino Bus system?
« on: October 04, 2011, 11:40:47 pm »
Hi,
I have installed bticino for many years, before meeting and becoming knx partner.
Frankly I consider it a system less practical and less flexible compared to knx, the only strong point is its ease of integration with audio video and great looks.
Also for those wishing to use that, provide for large distribution cabinet, since we need a large quantity of devices.
For example in a litle house (100mq) I install an 170 din modules and it's very full (audio, clima, system alarm, automation lights).
After I tried both ... I love knx.
Emanuele
I have installed bticino for many years, before meeting and becoming knx partner.
Frankly I consider it a system less practical and less flexible compared to knx, the only strong point is its ease of integration with audio video and great looks.
Also for those wishing to use that, provide for large distribution cabinet, since we need a large quantity of devices.
For example in a litle house (100mq) I install an 170 din modules and it's very full (audio, clima, system alarm, automation lights).
After I tried both ... I love knx.
Emanuele
39
Developers / how to extend the thermostats scheduler and energy monitor to EIB
« on: September 15, 2011, 09:57:33 am »
HI,
I wanted to add some functionality to the knx.
I read the readme file in the doc folder of the source and I am going to start work.
My intention was to create a thermostat a bit more complex with features such as: fans, mode, hating / cooling.
Also I was wondering if you could extend the scheduler to KNX thermostats and energy monitoring to a KNX device I am going to create.
Emanuele
I wanted to add some functionality to the knx.
I read the readme file in the doc folder of the source and I am going to start work.
My intention was to create a thermostat a bit more complex with features such as: fans, mode, hating / cooling.
Also I was wondering if you could extend the scheduler to KNX thermostats and energy monitoring to a KNX device I am going to create.
Emanuele
40
Developers / Re: QOrbiter: Something for everyone!
« on: September 13, 2011, 08:12:36 pm »
wow the Aeon it's fantastic !!!!
Good Work !!!
Emanuele
Good Work !!!
Emanuele
41
Developers / Re: Pandaboard and Standalone DCE
« on: August 20, 2011, 05:56:39 pm »
HI,
with the help of hari and possy, now my mini installation is up and running.
Thanks to the suggestion of hari I created a little script to launch the DCERouter and EIB:
Emanuele
with the help of hari and possy, now my mini installation is up and running.
Thanks to the suggestion of hari I created a little script to launch the DCERouter and EIB:
Code: [Select]
#!/bin/sh
screen -dmS DCERouter -t DCERouter /usr/pluto/bin/DCERouter
screen -dmS EIB -t EIB /usr/pluto/bin/EIB -d 27
exit 0
Emanuele
42
Developers / Re: Pandaboard and Standalone DCE
« on: August 17, 2011, 06:58:16 pm »
I try with RPCplugin
sudo ./DCERouter
Copyright (C) 2004 Pluto, Inc., a Florida Corporation
www.plutohome.com
Phone: +1 (877) 758-8648
This program is distributed according to the terms of the GNU Public License, available at:
http://www.fsf.org/licensing/licenses/gpl.html
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Public License for more details.
---------------
01 08/17/11 18:54:11.747 Can't open plug-in file './File_Grids_Plugin.so': ./File_Grids_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.748 Cannot load plug-in for device: 3. Be sure the file File_Grids_Plugin exists <0x40168000>
05 08/17/11 18:54:11.750 Loaded plug-in device: 4 master device: 27 -- ./General_Info_Plugin.so <0x40168000>
01 08/17/11 18:54:11.750 Can't open plug-in file './Climate_Plugin.so': ./Climate_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.750 Cannot load plug-in for device: 5. Be sure the file Climate_Plugin exists <0x40168000>
01 08/17/11 18:54:11.751 Can't open plug-in file './Datagrid_Plugin.so': ./Datagrid_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.751 Cannot load plug-in for device: 6. Be sure the file Datagrid_Plugin exists <0x40168000>
01 08/17/11 18:54:11.751 Can't open plug-in file './Infrared_Plugin.so': ./Infrared_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.751 Cannot load plug-in for device: 7. Be sure the file Infrared_Plugin exists <0x40168000>
05 08/17/11 18:54:11.752 Loaded plug-in device: 8 master device: 32 -- ./Lighting_Plugin.so <0x40168000>
01 08/17/11 18:54:11.752 Can't open plug-in file './Orbiter_Plugin.so': ./Orbiter_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.752 Cannot load plug-in for device: 9. Be sure the file Orbiter_Plugin exists <0x40168000>
01 08/17/11 18:54:11.753 Can't open plug-in file './Media_Plugin.so': ./Media_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.753 Cannot load plug-in for device: 10. Be sure the file Media_Plugin exists <0x40168000>
01 08/17/11 18:54:11.753 Can't open plug-in file './Telecom_Plugin.so': ./Telecom_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.753 Cannot load plug-in for device: 11. Be sure the file Telecom_Plugin exists <0x40168000>
01 08/17/11 18:54:11.753 Can't open plug-in file './Event_Plugin.so': ./Event_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.753 Cannot load plug-in for device: 12. Be sure the file Event_Plugin exists <0x40168000>
05 08/17/11 18:54:11.756 Loaded plug-in device: 13 master device: 33 -- ./Security_Plugin.so <0x40168000>
01 08/17/11 18:54:11.756 Can't open plug-in file './Plug_And_Play_Plugin.so': ./Plug_And_Play_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.756 Cannot load plug-in for device: 14. Be sure the file Plug_And_Play_Plugin exists <0x40168000>
05 08/17/11 18:54:11.757 Loaded plug-in device: 22 master device: 2032 -- ./RPC_Plugin.so <0x40168000>
05 08/17/11 18:54:11.840 Plugin 4 activated <0x40168000>
05 08/17/11 18:54:11.917 Plugin 8 activated <0x40168000>
01 08/17/11 18:54:11.998 Connect failed Unknown database 'pluto_security' <0x40168000>
01 08/17/11 18:54:11.998 Security Plugin: Cannot connect to database pluto_security! <0x40168000>
05 08/17/11 18:54:12.003 Socket::ReceiveData 0x1049e98 failed, bytes left 0 start: 350000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 16 Incoming_Conn Socket 16 127.0.0.1EVENT 13 T=33 Event #13 <0x46a27460>
05 08/17/11 18:54:12.003 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 16 127.0.0.1EVENT 13 T=33 Event #13 <0x46a27460>
05 08/17/11 18:54:12.004 TCPIP: Closing connection to 13 (Router Dev #0) 0x1049e98 m_Socket: -1 <0x46a27460>
05 08/17/11 18:54:12.004 Router::RemoveAndDeleteSocket 0x1049e98 13 <0x46a27460>
05 08/17/11 18:54:12.004 Plugin 13 activated <0x40168000>
01 08/17/11 18:54:12.005 Cannot initialize plug-in for device: 13 <0x40168000>
05 08/17/11 18:54:12.005 Socket::ReceiveData 0x1063790 failed, bytes left 0 start: 350000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 18 Incoming_Conn Socket 18 127.0.0.1EVENT 13 T=33 Event #13 <0x47227460>
05 08/17/11 18:54:12.005 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 18 127.0.0.1EVENT 13 T=33 Event #13 <0x47227460>
05 08/17/11 18:54:12.006 TCPIP: Closing connection to 13 (Router Dev #0) 0x1063790 m_Socket: -1 <0x47227460>
05 08/17/11 18:54:12.006 Router::RemoveAndDeleteSocket 0x1063790 13 <0x47227460>
05 08/17/11 18:54:12.083 Plugin 22 activated <0x40168000>
08 08/17/11 18:56:51.919 Received Message from -1003 (unknown / ) to 24 (Ingresso / Cucina), type 1 id 192 Command:On, retry none, parameters: <0x47a27460>
05 08/17/11 18:56:51.919 The target device 24 (routed to 20) has not registered. <0x4166d460>
[1313600212] [error] [client 192.168.80.104] GET /favicon.ico: Error 404: Not Found
[1313600212] [error] [client 192.168.80.104] GET /favicon.ico: Error 404: Not Found
sudo ./DCERouter
Copyright (C) 2004 Pluto, Inc., a Florida Corporation
www.plutohome.com
Phone: +1 (877) 758-8648
This program is distributed according to the terms of the GNU Public License, available at:
http://www.fsf.org/licensing/licenses/gpl.html
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Public License for more details.
---------------
01 08/17/11 18:54:11.747 Can't open plug-in file './File_Grids_Plugin.so': ./File_Grids_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.748 Cannot load plug-in for device: 3. Be sure the file File_Grids_Plugin exists <0x40168000>
05 08/17/11 18:54:11.750 Loaded plug-in device: 4 master device: 27 -- ./General_Info_Plugin.so <0x40168000>
01 08/17/11 18:54:11.750 Can't open plug-in file './Climate_Plugin.so': ./Climate_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.750 Cannot load plug-in for device: 5. Be sure the file Climate_Plugin exists <0x40168000>
01 08/17/11 18:54:11.751 Can't open plug-in file './Datagrid_Plugin.so': ./Datagrid_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.751 Cannot load plug-in for device: 6. Be sure the file Datagrid_Plugin exists <0x40168000>
01 08/17/11 18:54:11.751 Can't open plug-in file './Infrared_Plugin.so': ./Infrared_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.751 Cannot load plug-in for device: 7. Be sure the file Infrared_Plugin exists <0x40168000>
05 08/17/11 18:54:11.752 Loaded plug-in device: 8 master device: 32 -- ./Lighting_Plugin.so <0x40168000>
01 08/17/11 18:54:11.752 Can't open plug-in file './Orbiter_Plugin.so': ./Orbiter_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.752 Cannot load plug-in for device: 9. Be sure the file Orbiter_Plugin exists <0x40168000>
01 08/17/11 18:54:11.753 Can't open plug-in file './Media_Plugin.so': ./Media_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.753 Cannot load plug-in for device: 10. Be sure the file Media_Plugin exists <0x40168000>
01 08/17/11 18:54:11.753 Can't open plug-in file './Telecom_Plugin.so': ./Telecom_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.753 Cannot load plug-in for device: 11. Be sure the file Telecom_Plugin exists <0x40168000>
01 08/17/11 18:54:11.753 Can't open plug-in file './Event_Plugin.so': ./Event_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.753 Cannot load plug-in for device: 12. Be sure the file Event_Plugin exists <0x40168000>
05 08/17/11 18:54:11.756 Loaded plug-in device: 13 master device: 33 -- ./Security_Plugin.so <0x40168000>
01 08/17/11 18:54:11.756 Can't open plug-in file './Plug_And_Play_Plugin.so': ./Plug_And_Play_Plugin.so: cannot open shared object file: No such file or directory <0x40168000>
01 08/17/11 18:54:11.756 Cannot load plug-in for device: 14. Be sure the file Plug_And_Play_Plugin exists <0x40168000>
05 08/17/11 18:54:11.757 Loaded plug-in device: 22 master device: 2032 -- ./RPC_Plugin.so <0x40168000>
05 08/17/11 18:54:11.840 Plugin 4 activated <0x40168000>
05 08/17/11 18:54:11.917 Plugin 8 activated <0x40168000>
01 08/17/11 18:54:11.998 Connect failed Unknown database 'pluto_security' <0x40168000>
01 08/17/11 18:54:11.998 Security Plugin: Cannot connect to database pluto_security! <0x40168000>
05 08/17/11 18:54:12.003 Socket::ReceiveData 0x1049e98 failed, bytes left 0 start: 350000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 16 Incoming_Conn Socket 16 127.0.0.1EVENT 13 T=33 Event #13 <0x46a27460>
05 08/17/11 18:54:12.003 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 16 127.0.0.1EVENT 13 T=33 Event #13 <0x46a27460>
05 08/17/11 18:54:12.004 TCPIP: Closing connection to 13 (Router Dev #0) 0x1049e98 m_Socket: -1 <0x46a27460>
05 08/17/11 18:54:12.004 Router::RemoveAndDeleteSocket 0x1049e98 13 <0x46a27460>
05 08/17/11 18:54:12.004 Plugin 13 activated <0x40168000>
01 08/17/11 18:54:12.005 Cannot initialize plug-in for device: 13 <0x40168000>
05 08/17/11 18:54:12.005 Socket::ReceiveData 0x1063790 failed, bytes left 0 start: 350000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 18 Incoming_Conn Socket 18 127.0.0.1EVENT 13 T=33 Event #13 <0x47227460>
05 08/17/11 18:54:12.005 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 18 127.0.0.1EVENT 13 T=33 Event #13 <0x47227460>
05 08/17/11 18:54:12.006 TCPIP: Closing connection to 13 (Router Dev #0) 0x1063790 m_Socket: -1 <0x47227460>
05 08/17/11 18:54:12.006 Router::RemoveAndDeleteSocket 0x1063790 13 <0x47227460>
05 08/17/11 18:54:12.083 Plugin 22 activated <0x40168000>
08 08/17/11 18:56:51.919 Received Message from -1003 (unknown / ) to 24 (Ingresso / Cucina), type 1 id 192 Command:On, retry none, parameters: <0x47a27460>
05 08/17/11 18:56:51.919 The target device 24 (routed to 20) has not registered. <0x4166d460>
[1313600212] [error] [client 192.168.80.104] GET /favicon.ico: Error 404: Not Found
[1313600212] [error] [client 192.168.80.104] GET /favicon.ico: Error 404: Not Found
43
Developers / Re: Pandaboard and Standalone DCE
« on: August 17, 2011, 06:19:22 pm »
Thanks for your help, then:
Hari, I have copied the bin file in /opt/pluto and /usr/pluto, there is no way to debug the message?
Posde, I have created a device is 37 and the interface and I used the corrected GA, I used EIB in my previous installation of LMCE 8.10 and I've never had major problems.
For the problem that I do not load the GA from file?
Emanuele
Hari, I have copied the bin file in /opt/pluto and /usr/pluto, there is no way to debug the message?
Posde, I have created a device is 37 and the interface and I used the corrected GA, I used EIB in my previous installation of LMCE 8.10 and I've never had major problems.
For the problem that I do not load the GA from file?
Emanuele
44
Developers / Re: Pandaboard and Standalone DCE
« on: August 13, 2011, 09:20:50 pm »
Hi,
I just got back from holiday, and I'm testing dcerouter with my pandaboard, eibd it's ok, i tested with groupswrite and the light go in on, but from web admin the light don't work and I can not load the EIB address from file, so I create a light with template 37, i write the group address manually but no telegram on busmonitor.
EIB bin is on /usr/pluto/bin.
Emanuele
I just got back from holiday, and I'm testing dcerouter with my pandaboard, eibd it's ok, i tested with groupswrite and the light go in on, but from web admin the light don't work and I can not load the EIB address from file, so I create a light with template 37, i write the group address manually but no telegram on busmonitor.
EIB bin is on /usr/pluto/bin.
Emanuele
45
Developers / Re: Pandaboard and Standalone DCE
« on: August 03, 2011, 08:00:16 pm »
= Install on Pandaboard (Rages) =
I installed the Standalone DCE in a pandaboard with Ubuntu 11.04, these are the steps I followed:
* Install apache2 php5 and mysql, option phpmyadmin
° sudo apt-get install apache2
° sudo apt-get install php5 libapache2-mod-php5
° sudo apt-get install mysql-server mysql-client
° sudo apt-get install libapache2-mod-auth-mysql php5-mysql
° in option sudo apt-get install phpmyadmin, sudo ln -s /usr/share/phpmyadmin /var/www/phpmyadmin,
You will need to edit /etc/phpmyadmin/config.inc.php and delete "//" from:
// $cfg['Servers'][$i]['AllowNoPassword'] = TRUE;
* Install build requirements
° sudo apt-get install build-essential g++ libmysqlclient15-dev libattr1-dev libxml2-dev
* Download the source
° mkdir -p /home/public/arm-pandaboard
° cd /home/public/arm-pandaboard
° svn co http://svn.linuxmce.org/svn/people/hari/mini/
* Make
° cd /home/public/arm-pandaboard/mini/src/
° edit Makefile and delete AEt_EMC2000. I needed a bin file of EIB-eibd and I added this to the makefile,
but we must have installed eibd.
° make
° now copy the bin directory in /usr/pluto/bin and in /opt/pluto/bin
* Import the database
° go in /home/public/arm-pandaboard/mini/dumps and run ./import.sh
* Run mini-install.sh
° go in /home/public/arm-pandaboard/mini/installer and run ./mini-install.sh
* Install lmce_admin
° download the source, go in /var/www/ and sudo svn co http://svn.linuxmce.org/svn/branches/LinuxMCE-0810/web/lmce-admin
° now for simplicity we can use phpMyAdmin, and see in the database pluto_main the table Users and
Installers and insert the data of our users, your password should be md5, then (thanks Possy)
in mysql:
"update Users set password = md5 ('your-password) where PK_Users = 1;"
° in Installers_Users modifiy userCanModifyInstallation at 1 and you check that FK_users and
FK_Installation match PK_Users and PK_Installetion in tables Users and Installetion.
I installed the Standalone DCE in a pandaboard with Ubuntu 11.04, these are the steps I followed:
* Install apache2 php5 and mysql, option phpmyadmin
° sudo apt-get install apache2
° sudo apt-get install php5 libapache2-mod-php5
° sudo apt-get install mysql-server mysql-client
° sudo apt-get install libapache2-mod-auth-mysql php5-mysql
° in option sudo apt-get install phpmyadmin, sudo ln -s /usr/share/phpmyadmin /var/www/phpmyadmin,
You will need to edit /etc/phpmyadmin/config.inc.php and delete "//" from:
// $cfg['Servers'][$i]['AllowNoPassword'] = TRUE;
* Install build requirements
° sudo apt-get install build-essential g++ libmysqlclient15-dev libattr1-dev libxml2-dev
* Download the source
° mkdir -p /home/public/arm-pandaboard
° cd /home/public/arm-pandaboard
° svn co http://svn.linuxmce.org/svn/people/hari/mini/
* Make
° cd /home/public/arm-pandaboard/mini/src/
° edit Makefile and delete AEt_EMC2000. I needed a bin file of EIB-eibd and I added this to the makefile,
but we must have installed eibd.
° make
° now copy the bin directory in /usr/pluto/bin and in /opt/pluto/bin
* Import the database
° go in /home/public/arm-pandaboard/mini/dumps and run ./import.sh
* Run mini-install.sh
° go in /home/public/arm-pandaboard/mini/installer and run ./mini-install.sh
* Install lmce_admin
° download the source, go in /var/www/ and sudo svn co http://svn.linuxmce.org/svn/branches/LinuxMCE-0810/web/lmce-admin
° now for simplicity we can use phpMyAdmin, and see in the database pluto_main the table Users and
Installers and insert the data of our users, your password should be md5, then (thanks Possy)
in mysql:
"update Users set password = md5 ('your-password) where PK_Users = 1;"
° in Installers_Users modifiy userCanModifyInstallation at 1 and you check that FK_users and
FK_Installation match PK_Users and PK_Installetion in tables Users and Installetion.