Messages

phenigma, Could you build a new update of this?
Thanks
Hernan

If you upgrade the md w/ apt-get update & apt-get upgrade.....
if that task needs to upgrade the "pluto-nvidia-drivers" package... you should note that lmce change the /etc/X11/xorg.conf file changing the
Driver from (Driver "nvidia") to (Driver "nv"), when you reboot the MD system  you will see a message and you cannot see the UI2 because a openglx problem.

Try changing againg the /etc/X11/xorg.conf file to Driver "nvidia" and reboot again


Thanks
Bugui

I did the following procedure and i get it work.

1) Download Newest Nvidia drivers from here

2) Open module blacklist as admin

gksudo gedit /etc/modprobe.d/blacklist.conf

Add these lines and save:

blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv

3) Uninstall any previously installed Nvidia drivers:

sudo apt-get --purge remove nvidia-*

4) Reboot your computer

5) When an error message pops up saying that Ubuntu cannot load Nvidia drivers, choose Exit to terminal (Exit to console)

6) Login and cd to the directory where you saved your file

7)Install drivers

sudo sh NVIDIA-Linux-x86_XXXXX....

reboot MD system

Hi, I get integrate a PC5401 module and LinuxMCE.
I'm using a 1832 alarm panel of DSC.
It's works!!!

I will upload the changes that i did in the Power5020 template. in a couple of days.

Regards.
Bugui

Hi purps,
I got live stream in a web browser. There are 3 types of apps inside it's internal BOA web server (ActiveX, JAVA, and Push).
I usually used push with mozilla and works, and I think that it's Motion JPEG and not still JPEG.

Take a look to this part of the webcam log. It's like it is continually downloading a file?....LMCE spects a .jpg picture and its receiving something more, like a video....

Buffer sent. <0xb4f70b90>
10   09/17/11 4:19:27.160      Receiving buffer from 192.168.80.201 with max size 16384 and timeout 5000... <0xb4f70b90>
10   09/17/11 4:19:27.203      Receiving buffer from 192.168.80.201 with max size 16384 and timeout 5000... <0xb4f70b90>
10   09/17/11 4:19:27.207      Receiving buffer from 192.168.80.201 with max size 16384 and timeout 5000... <0xb4f70b90>
10   09/17/11 4:19:27.208      Receiving buffer from 192.168.80.201 with max size 16384 and timeout 5000... <0xb4f70b90>
10   09/17/11 4:19:27.210      Closing connection to 192.168.80.201 <0xb4f70b90>
10   09/17/11 4:19:27.223      Method call ended. <0xb4f70b90>

But I read that the IPC-1002 cam supports both types of streams. I can't get information in order to change that kind of transmition.
Also, I found that the camera has some internal paramitters but i didn't touch them at this time.

Is there another kind of template based on motionJPEG ??

Thanks,
Hernan

Thanks phenigma, that will be great.

Thanks
Bugui

Hello Pnuts,
did you get the ipvillar IPCAM works ?
I buy one but I can't make it work.
There is a problem with authentication, Im using the instruction at the wiki page http://wiki.linuxmce.org/index.php/IPC-1002.
Thanks in advance.
Hernan

Hey guys,
Libxine2 works great, with the following configuration:
libxine2 and pluto-xine-player 2.0.0.44.11071324189 and lastes nvidia drivers.

Just one issue that I found was try to play a .mkv file that has video, audio, and subs tracks.
It just playback the file and you get a grey screen, the subs and audio, (you can't see the video because you will see a grey screen).
It's seams like it is related with vdpau and "pluto-xine-player 2.0.0.44.11071324189".
One thing that I tried was change the vdpau acceleration to xv, and you can see the video but it's not an intelligent solution for my Zotac HD-ID11, because the 1080p videos are unwachable.

Could someone provide to me a new version of pluto-xine-player to be used with libxine2 ?
I think that the newers version of pluto-xine could fix this issue.

Thanks in advance,

Sorry by my english,
Regards,
Hernan

I'm experiencing the same issue.
LMCE 0810

Hernan

Hi,
pls check the following forum. there is an explanation about it.

http://forum.linuxmce.org/index.php/topic,10058.0.html

Regards
Hernan

Hey now it works, what I did was:

create /usr/pluto/orbiter/bits
Reboot core
full regenerate 7970 orbiter
reload router.

Then orbiter at C7970 begins to work.

Thanks
Hernan

Hello guys,
I have the same issue with my c7970.
Also I have  dpkg -l|grep pluto-proxy
ii  pluto-proxy-orbiter                        2.0.0.44.11071324189                                       <insert up to 60 chars description>

I create /usr/pluto/orbiter/bits but c7970 didn't connect.
If I do a ls for /usr/pluto/orbiter/bits i get only one directory called "174". that is the weborbiter device, the ID for 7970 orbiter is "54".

I made a full regenerate for my c7970 orbiter but nothing happens.
What can I do now?

Thanks in advance.
Hernan

Hello,
I follow the instructions at wiki (http://wiki.linuxmce.org/index.php/IPC-1002) to create a new template based on panasonic ip cam.
I can't get a picture form my IP Vilar camera (IPC-1002).
There is a part of the lmce log of this camera.

http://pastebin.lugmen.org.ar/6650

Is there someone that has this cam (IPC-1002) working?

Hernán

I have the same issue.
Hernán

Hi,
I have PAL DVDs.
It's happens when you the movie starts, for instance... I can see the trailers ok, and after the menu area, the players stops.

Hernan